Bluewater

Bluewater 9060-1113 22mm Programmable Breaker Switch

SKU: 1004868 · UPC: 810196330993 · MPN: 9060-1113
★★★★★ 4.7 · 0 reviews
Authorized dealer
$60.00
or 4 payments of $15.00 with Affirm · See disclosures
In stock — Ships Monday Pickup Tuesday · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order now, ships Monday
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$60.00
02 · Overview

Bluewater 9060-1113 22mm Programmable Breaker Switch — Product description

The Bluewater 9060-1113 is a 22mm latching Off/On switch with a programmable circuit breaker built in. Pick one of eight trip settings from 0 to 20A, get a blue/red LED so you can read the circuit in the dark, and mount it in an IP69K sealed stainless body that shrugs off salt spray.

Some switches on a boat do one job. This one does two. The Bluewater 9060-1113 is a 22mm electronic Off/On switch with a programmable circuit breaker built right into the same unit, so you don't need a separate breaker for the circuit it controls. You press it to turn a load on, you press it again to turn it off, and if something draws more than you've told it to allow, it trips. That's a lot of work for one small hole in your panel.

Let's start with how it operates. It's a latching switch. Push once for on, push again for off. There's no toggle to bump or rocker to catch on a sleeve, just a sealed 22mm push control that stays where you left it. For anything you run for a long stretch, like a bilge blower, a set of courtesy lights, or a washdown pump, that latching action is exactly what you want at the helm.

The programmable breaker is the real headline. You get eight selectable trip settings between 0 and 20A, and you set them with a simple press-and-hold. So instead of hunting for a breaker sized to a specific pump or light circuit, you match the trip point to the load right at the switch. If you swap the gear on that circuit later, you can change the setting instead of changing the hardware. Just remember the usual rule on any boat: the protection has to suit the wire and the load, so pick a setting that makes sense for what's actually connected.

Motors and pumps are famous for drawing a big gulp of current the instant they start. That's why the inrush rating matters here. This switch handles 120A surges for 120 microseconds, so pumps and motors can start up without causing nuisance trips. You get protection that reacts to a real overload, not one that gives up every time a pump spins up.

Visibility is covered too. The LED feedback gives you a blue backlight so you can find the switch in a dark cabin or at the helm at night. When the circuit is on, the light shifts to red. Blue means off, red means on. At a glance, in the dark, you know the state of the circuit without touching a thing. If you've ever run a row of identical switches and tried to remember which ones were live, you'll appreciate that.

Out on the water, switches live a hard life. This one is built with a sealed SS316 stainless steel body, and the materials list calls out nickel-plated brass and SS316 stainless steel. It carries an IP69K rating, which means it withstands salt spray, washdowns, and submersion. That makes it a sensible pick for exposed spots like a center console, a T-top, a swim platform, or any place the hose gets pointed. The mechanical life is rated at 50,000 cycles and the electrical life at 10,000 cycles, so it's meant for regular use season after season.

Installation is straightforward. Drill a 22mm hole in material up to 6mm thick and mount the switch. Then plug in a Bluewater 22mm Deutsch-style harness. Keep in mind the harness isn't in the package. The 22mm harness, part number 9053-3914, is sold separately, so add it to your order if you don't already have one. Electrical rating is 20A at 12 to 24VDC, which covers both 12V and 24V systems.

The 9060 Series combines an electronic switch and a programmable circuit breaker in one 22mm unit. Bluewater positions it for pumps, lighting, and mission-critical gear. If you're building or refitting a switch panel and want clean, consistent 22mm controls with protection built in, this is a good fit. If you're not sure which trip setting suits your load or how to wire it in, send us a note. Our crew would rather help you get it right the first time than have you troubleshoot it on the water.

Key Features

  • Latching Off/On action, push once for on and push again for off, so the circuit stays where you set it
  • Built-in programmable breaker with eight selectable trip settings from 0 to 20A, set with a press-and-hold
  • 120A inrush rating for 120 microseconds, so pumps and motors start without nuisance trips
  • Blue backlight for night visibility that shifts to red when the circuit is on
  • IP69K protection with a sealed SS316 stainless steel body, ready for salt spray, washdowns, and submersion
  • Rated 20A at 12 to 24VDC, covering both 12V and 24V systems
  • 50,000 mechanical cycles and 10,000 electrical cycles of rated life
  • Mounts in a 22mm hole in material up to 6mm thick, harness sold separately

Why Buy from NVN Marine

  • Authorized Bluewater reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Tuesday) $60.00
03 · The numbers

Technical specifications

Title Bluewater 22mm Programmable Breaker Switch, Off/On, Blue/Red LED
Brand Bluewater
Manufacturer Part Number 9060-1113
UPC 810196330993
Function Off-On (latching) with programmable breaker
LED Indicators Blue off / Red on
Voltage/Current 20A @ 12 to 24VDC
Programmable Breaker 8 selectable settings, 0 to 20A
Inrush Rating 120A for 120µs
Protection Rating IP69K
Material Nickel-plated brass / SS316 stainless steel
Mechanical Life 50,000 cycles
Electrical Life 10,000 cycles
Mounting Hole 22mm, material up to 6mm thick
Connector Deutsch-style (22mm harness 9053-3914 sold separately)
04 · Before you buy

Frequently asked questions

What does the Bluewater 9060-1113 do?

It's a 22mm electronic Off/On switch with a built-in programmable circuit breaker. It's a latching switch, so you push once for on and push again for off, and the breaker is part of the same unit.

How does the programmable breaker work?

It offers eight selectable trip settings from 0 to 20A. You set them with a simple press-and-hold, so you can match the trip point to the load without adding a separate breaker.

What is the maximum current and voltage rating?

The switch is rated for 20A at 12 to 24VDC, so it works on both 12V and 24V systems.

Will it trip when a pump or motor starts?

It's designed to handle inrush. The rating is 120A surges for 120 microseconds, so pumps and motors start without nuisance trips.

What do the LED colors mean?

The switch has a blue backlight for night visibility. The light shifts to red when the circuit is on, so blue means off and red means on.

Is it waterproof?

Yes. It carries an IP69K protection rating and a sealed SS316 stainless steel body. It withstands salt spray, washdowns, and submersion.

What size hole do I need to drill?

A 22mm hole in material up to 6mm thick.

Is the wiring harness included?

No. The switch uses a Bluewater 22mm Deutsch-style harness, and the 22mm harness, part number 9053-3914, is sold separately.

How long is the switch rated to last?

The mechanical life is rated at 50,000 cycles and the electrical life at 10,000 cycles.

What is the difference between this switch and a plain rocker switch?

A plain switch only opens and closes the circuit. This one is a latching electronic switch that also includes a programmable breaker, so it controls and protects the circuit in one 22mm unit.

05 · Customer voices

Customer reviews