Bluewater

Bluewater 5 Position Bus Bar 312314-B-020

SKU: 1004896 · UPC: 810196330580 · MPN: 312314-B-020
★★★★★ 4.7 · 0 reviews
Authorized dealer
$13.79
or 4 payments of $3.44 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$13.79
02 · Overview

Bluewater 5 Position Bus Bar 312314-B-020 — Product description

The Bluewater 5 Position Bus Bar gives you five clean connection points in a compact body rated up to 100 amps. It's a simple way to organize power or ground wiring behind a tight panel, with 1/4 inch stainless studs that take standard ring terminals.

Every boat with more than a couple of circuits ends up needing a clean place to land wires. A bus bar is that place. The Bluewater 5 Position Bus Bar, model 312314-B-020, gives you five terminals in a compact body rated up to 100 amps. It's a small part that does a lot of quiet work behind a panel. Instead of stacking ring terminals on a single battery post or twisting wires into a nest of splices, you land each conductor on its own stud and keep everything organized. And when something needs tracing a year from now, you'll be glad you wired it this way.

Here's what you're getting. Five positions. Each one is a 1/4 inch stainless steel stud, so it takes standard 1/4 inch ring terminals. The bar is rated up to 100 amps. Mounting is done with two #10, 1/4 inch screws through 0.21 inch mounting holes, and those holes sit 5.25 inches apart. That spacing matters, so grab a tape measure and check the spot behind your dash or in your electrical locker before you order. It's a lot easier to find out now than with the drill in your hand.

This bar is built for smaller systems and tight panels. Think center consoles, bay boats, pontoon helms, skiffs, and the cramped space behind a switch panel where a bigger distribution block simply won't fit. The compact layout is the whole point. Common jobs include a shared ground return for your electronics, a power feed point for accessories, or a tidy landing spot for the negative leads from a handful of switches and gauges. It's also suited to automotive panels, so it works just as well in a tow rig or trailer as it does on the water.

A word on the rating. One hundred amps is the limit for the bar itself, not a target. Add up the load of everything you plan to connect and leave yourself some headroom. Size every wire for its own circuit, and protect each circuit with its own fuse or breaker upstream. A bus bar distributes power. It doesn't protect anything. If you need built-in fusing, you're shopping for a fuse block, and this isn't one.

Installation is straightforward. Pick a flat, dry spot with room to work and a clear path for your wires. Mark the two mounting holes 5.25 inches apart, drill pilot holes, and fasten the bar with two #10, 1/4 inch screws. Make your crimps properly, using the right terminals for your wire gauge, and use adhesive-lined heat shrink on the connections if the spot ever sees moisture. Tighten the terminals snug and check them again after the first few trips out. Vibration is real on a boat, and a loose lug on a power bus is one of those problems that's easy to prevent and a pain to chase.

One more thing to plan for. Mounting screws and stud nuts aren't listed in the specifications, so don't count on them being in the package. Pick up stainless hardware that matches the #10 screw size and the 1/4 inch studs, and you're covered. Also keep the bar clear of anything it shouldn't touch. If you're using it as a power bus, make sure it can't contact grounded metal, a stray wire strand, or a loose tool that rolls around in a console.

If you're upgrading an existing system or building a new panel from scratch, this bar keeps the wiring neat and efficient, and that pays off every time you open the hatch. It's not fancy. It's just a solid, compact way to get your circuits organized. We're an authorized Bluewater reseller, so you get full manufacturer warranty coverage, and our crew is happy to help you work out how many positions your layout needs.

Key Features

  • 5 positions, so you can land five separate conductors on one compact bar
  • 1/4 inch stainless steel studs that take standard 1/4 inch ring terminals
  • Rated up to 100 amps for power or ground distribution in smaller systems
  • Compact body that fits tight marine and automotive panels
  • 0.21 inch mounting holes spaced 5.25 inches apart for a simple two-screw mount
  • Mounts with two #10, 1/4 inch screws, so no special tools are needed
  • Keeps wiring neat, which makes future troubleshooting faster

Why Buy from NVN Marine

  • Authorized Bluewater reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $13.79
03 · The numbers

Technical specifications

Title Bluewater 5 Position Bus Bar
Brand Bluewater
Manufacturer Part Number 312314-B-020
UPC 810196330580
Model 312314-B-020
Category Electrical
Number of Positions 5
Current Rating Up to 100 AMP
Stud Size 1/4″
Stud Material Stainless Steel
Mounting Holes 0.21"
Mounting Screw Size #10, 1/4″
Distance Between Mounting Holes 5.25″
Installation Mount with (2) #10, 1/4″ Screws
04 · Before you buy

Frequently asked questions

How many connections does this bus bar have?

Five. It's a 5 position bar, and each position is a 1/4 inch stainless steel stud.

What's the maximum current rating?

It's rated up to 100 amps. Add up the loads you plan to connect and leave some headroom below that number.

What size ring terminals fit the studs?

The studs are 1/4 inch stainless steel, so you'll want 1/4 inch ring terminals sized to match your wire gauge.

How far apart are the mounting holes?

The distance between mounting holes is 5.25 inches, and the holes themselves are 0.21 inches.

What screws do I need to mount it?

Mount it with two #10, 1/4 inch screws. They aren't listed as included, so plan to pick up stainless hardware separately.

Is this a fuse block?

No. It's a distribution bar and doesn't provide circuit protection. Protect each circuit with its own fuse or breaker upstream.

Can I use it in an automotive panel?

Yes. It's described as suited to tight marine or automotive panels where space is limited.

What is the manufacturer part number?

The Bluewater model and manufacturer part number is 312314-B-020.

Is it good for a small boat?

That's what it's built for. The compact design suits smaller systems and cramped panels, like those on a console boat or skiff.

Does it come with a manufacturer warranty?

Yes. We're an authorized Bluewater reseller, so the full manufacturer warranty applies.

05 · Customer voices

Customer reviews