T-H Marine ATLAS EDGE 6" Hydraulic Jack Plate, Max, Silver
T-H Marine ATLAS EDGE 6" Hydraulic Jack Plate, Max, Silver — Product description
The Max is the heaviest-rated ATLAS EDGE 6 inch jack plate, built for outboards up to 450 HP and 1,000 lbs, with 6 inches of set back and 5.75 inches of hydraulic rise.
The T-H Marine ATLAS EDGE 6 inch Set Back Hydraulic Jack Plate in the Max version gives you a way to move a heavy outboard back from the transom and change its height with the push of a button at the helm. It's finished in silver, it's rated for engines up to 450 HP, and it carries a listed weight limit of 1,000 lbs. That weight limit is the highest in the ATLAS EDGE 6 inch lineup, so this is the one to look at when the motor on your transom is a big one.
So what does a jack plate actually do? It mounts between your transom and your outboard and lets you raise or lower the motor relative to the hull. A hydraulic version does that on demand, without stopping to unbolt anything. Drop the motor lower and the prop bites better for getting on plane with a load. Raise it and you cut drag at speed, run shallower, and let the boat feel lighter on the water. Many anglers and performance boaters play with that height all season, because the best setting on a calm morning isn't always the best setting in chop.
The 6 inch set back is the other half of the story. Pushing the motor farther behind the transom changes how the boat sits and how the prop works in the water. For a lot of hulls, that extra distance helps with handling, clears the transom of prop wash and can even free up a little room in the back of the boat. It also shifts weight aft, so think about your trim, your fuel load and your livewell before you decide how much set back you want. Six inches is a solid middle ground for many setups, and it's the setback this model is built around.
Here are the numbers we can stand behind. Hydraulic rise is 5.75 inches. Total rise is listed at 8.25 to 9.75 inches. The weight limit is 1,000 lbs, and the maximum HP is 450. The manufacturer part number is AHJE-6GX-DP, and the UPC is 733572259513. Before you order, check those rise numbers against your own transom height and your motor's cavitation plate position. Jack plate fitment comes down to a few inches either way, and it's much easier to measure twice here than to drill twice at the dock.
The ATLAS EDGE line comes in a few weight and horsepower ratings, and the Max sits at the top of the 6 inch group. The Classic version is rated at 625 lbs and up to 300 HP. The Heavy Duty version steps up to 810 lbs and up to 450 HP. The Max in this listing carries the same 450 HP ceiling as the Heavy Duty, but it raises the weight limit to 1,000 lbs. If you're running a big, heavy four-stroke and you want extra margin on the weight side, that's the difference you're paying for. If your engine is lighter, one of the other ratings may do the job.
A few honest notes. A jack plate is a serious piece of hardware on the back of your boat, and the install matters as much as the part. You'll want to plan your through-transom or mounting hardware, your hydraulic connections and your power source ahead of time, and you'll want to confirm that the motor's weight, including anything bolted on or hung off it, stays inside the 1,000 lb limit. We don't list the pump, hoses or switch details for this model, so check the manufacturer's literature for what's in the box before you start planning the rest of the system.
Who's it for? Bass boat owners, bay boat and flats skiff captains, offshore center consoles and anyone else with a larger outboard who wants to fine tune performance without hauling the boat back to the shop. If you tow to different water all season, or fish shallow one weekend and run hard across open water the next, being able to tweak motor height from the console pays for itself fast.
We're an authorized T-H Marine reseller, and our crew can help you sort out the fitment questions before you buy. If you're not sure the 6 inch set back is right for your hull, or you're debating between the Max and one of the other ratings, send us your boat, your motor and your transom height and we'll help you narrow it down.
Key Features
- 6 inch set back moves the outboard back from the transom
- Hydraulic rise of 5.75 inches, adjustable from the helm
- Total rise listed at 8.25 to 9.75 inches
- Max version carries a 1,000 lb weight limit
- Rated for outboards up to 450 HP
- Highest weight limit in the ATLAS EDGE 6 inch lineup
- Silver finish
- Manufacturer part number AHJE-6GX-DP
Why Buy from NVN Marine
- Authorized T-H Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | T-H Marine ATLAS EDGE 6" Set Back Hydraulic Jack Plate - Max - Silver |
|---|---|
| Brand | T-H Marine |
| Manufacturer Part Number | AHJE-6GX-DP |
| UPC | 733572259513 |
| Product Line | ATLAS EDGE |
| Version | Max |
| Type | Hydraulic Jack Plate |
| Set Back | 6" |
| Hydraulic Rise | 5.75" |
| Total Rise | 8.25" to 9.75" |
| Weight Limit | 1,000 lbs |
| Maximum Horsepower | 450 HP |
| Color | Silver |
| Category | Boat Outfitting | Jack Plates |
Frequently asked questions
What is the maximum horsepower for this jack plate?
It's rated for up to 450 HP. The Classic version of the ATLAS EDGE 6 inch tops out at 300 HP, so the Max and Heavy Duty are the ones to look at for bigger engines.
What's the weight limit?
The listed weight limit is 1,000 lbs. That's the highest of the ATLAS EDGE 6 inch versions. The Heavy Duty is listed at 810 lbs and the Classic at 625 lbs.
How much set back does this model give me?
It has a 6 inch set back, which means the motor sits 6 inches farther behind the transom than it would on a direct mount.
How much does the motor move up and down?
Hydraulic rise is 5.75 inches. The listed total rise is 8.25 to 9.75 inches.
What's the difference between the Max, Heavy Duty and Classic?
They share the same 6 inch set back and 5.75 inch hydraulic rise. The Classic is rated at 625 lbs and 300 HP. The Heavy Duty is rated at 810 lbs and 450 HP. The Max is rated at 1,000 lbs and 450 HP.
What color is it?
This listing is the silver finish.
What's the part number and UPC?
The manufacturer part number is AHJE-6GX-DP and the UPC is 733572259513.
Does it come with the hydraulic pump and hoses?
We don't have a confirmed in-the-box list for this model. Check the manufacturer's literature or ask our crew before you order so you know exactly what else you'll need.
Will it fit my boat?
That depends on your transom height, your motor and how much total rise you need. Send us your boat and motor details and we'll help you check it before you buy.