{"title":"Navico Transducers","description":"\u003cp class=\"nvn-collection-hero\"\u003eNavico transducers feed sonar to Lowrance, Simrad and B\u0026amp;G sounders, from Active Imaging 2-in-1 and 3-in-1 units to skimmer, thru-hull and ice models. Match the transducer to your unit and mount style.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-collection-guide\"\u003e\n\u003ch2\u003eChoosing a Navico Transducer\u003c\/h2\u003e\n\u003cp\u003eStart with the sonar features you want. Active Imaging 2-in-1 adds DownScan and SideScan, while 3-in-1 also includes traditional CHIRP sonar in one transom-mount housing. Skimmer transducers cover traditional 83\/200 kHz sonar at a lower cost for boats that do not need imaging.\u003c\/p\u003e\n\u003cp\u003eNext pick the mount. Transom-mount transducers bolt to the back of the boat and suit most trailer boats. Thru-hull and in-hull models give a cleaner signal for larger hulls, with bronze thru-hulls for fiberglass and wood. Check the connector and pin count so the transducer plugs into your unit, since a 9-pin connector fits specific Lowrance and Simrad displays. Ice-fishing anglers can pick a dedicated ice transducer. Confirm fit and connector before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-collection-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the difference between 2-in-1 and 3-in-1 Active Imaging?\u003c\/summary\u003e\n    \u003cp\u003eThe 2-in-1 adds DownScan and SideScan imaging. The 3-in-1 also includes traditional CHIRP sonar in the same transom-mount housing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill a Navico transducer fit my unit?\u003c\/summary\u003e\n    \u003cp\u003eCheck the connector and pin count. A 9-pin connector fits specific Lowrance and Simrad displays, so match it to your sounder.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eTransom mount or thru-hull?\u003c\/summary\u003e\n    \u003cp\u003eTransom mount suits most trailer boats. Thru-hull gives a cleaner signal on larger hulls, with bronze versions for fiberglass and wood.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRelated Collections\u003c\/h2\u003e\n\u003cul class=\"nvn-related-collections\"\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-instruments\"\u003eMarine Navigation \u0026amp; Instruments\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/navico-products\"\u003eNavico\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-accessories\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Accessories\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-ais-systems\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; AIS Systems\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-autopilots\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Autopilots\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-black-box-modules\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Black Box Modules\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-cameras-night-vision\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Cameras \u0026amp; Night Vision\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/cameras-network-video\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Cameras - Network Video\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-clocks-barometers\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Clocks \u0026amp; Barometers\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-compasses\"\u003eMarine Navigation \u0026amp; Instruments -\u0026gt; Compasses\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"CollectionPage\",\n    \"name\": \"Navico Transducers\",\n    \"description\": \"Navico transducers including Active Imaging 2-in-1 and 3-in-1, skimmer, thru-hull and ice transducers for Lowrance and Simrad sounders.\",\n    \"url\": \"https:\/\/www.nvnmarine.com\/collections\/navico-products-transducers\"\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"BreadcrumbList\",\n    \"itemListElement\": [\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 1,\n            \"name\": \"Home\",\n            \"item\": \"https:\/\/www.nvnmarine.com\"\n        },\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 2,\n            \"name\": \"Marine Navigation \u0026 Instruments\"\n        },\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 3,\n            \"name\": \"Navico Transducers\",\n            \"item\": \"https:\/\/www.nvnmarine.com\/collections\/navico-products-transducers\"\n        }\n    ]\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the difference between 2-in-1 and 3-in-1 Active Imaging?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 2-in-1 adds DownScan and SideScan imaging. The 3-in-1 also includes traditional CHIRP sonar in the same transom-mount housing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will a Navico transducer fit my unit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Check the connector and pin count. A 9-pin connector fits specific Lowrance and Simrad displays, so match it to your sounder.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Transom mount or thru-hull?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Transom mount suits most trailer boats. Thru-hull gives a cleaner signal on larger hulls, with bronze versions for fiberglass and wood.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","products":[{"product_id":"41974-navico-b260-bronze-thru-hull","title":"Navico B260 Bronze Thru Hull","description":"\u003cp\u003e\u003cstrong\u003e1 kW\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe performance of Airmar's \"1 kW, 260 family\" of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and its wide, 19° beam yields broad coverage under the boat.\u003c\/p\u003e \u003cp\u003eThe thru-hull, B260 model has a bronze housing and is also available in stainless steel (SS260) for installation in metal hulls. Installed with the included, custom-fitting, High-performance Fairing, the B260 gives excellent results at speeds up to 30 knots (34 MPH).\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eUpgrade your sonar game with the B260 Bronze Thru-Hull transducer, a powerhouse designed for serious anglers chasing trophy fish in deep waters or tight to structure. This robust unit delivers crystal-clear images across a wide range of depths, turning murky bottoms into detailed maps that reveal hidden fish and underwater features. Whether you're targeting bottom-dwellers or scanning vast blue water expanses, its advanced broadband technology ensures you never miss the action.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Superior Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-Frequency Operation:\u003c\/strong\u003e Seamlessly switches between 50 kHz for broad coverage in deep water and 200 kHz for pinpoint precision in shallower zones.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Power Output:\u003c\/strong\u003e Rated at 1 kW RMS, providing the muscle needed for maximum penetration and sensitivity.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBronze Construction:\u003c\/strong\u003e Corrosion-resistant housing built to withstand harsh marine environments, ideal for saltwater adventures.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Depth and Temperature Sensing:\u003c\/strong\u003e Real-time data to help you make informed decisions on lure depth and fish behavior.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBeam Angles Optimized for Versatility:\u003c\/strong\u003e A wide 19-degree beam at 50 kHz covers more ground, while the narrow 6-degree at 200 kHz sharpens focus on structure.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e7-Pin Blue Connector:\u003c\/strong\u003e Plug-and-play simplicity with popular marine electronics.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Fairing Block Included:\u003c\/strong\u003e Reduces drag and maintains accuracy even at planing speeds up to 30 knots.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-benefits\"\u003e\n    \u003ch2\u003eWhy This Transducer Elevates Your Fishing Experience\u003c\/h2\u003e\n    \u003cp\u003eThe magic lies in its low-profile ceramic design, which minimizes ringing for cleaner returns—perfect for spotting fish hugging the bottom or weeds. At 50 kHz, the seven-element array paints expansive coverage, ideal for offshore trolling or searching vast reefs. Flip to 200 kHz, and the tight beam slices through clutter, delivering the sharp resolution bass anglers crave near drop-offs and points.\u003c\/p\u003e\n    \n    \u003cp\u003eAnglers report consistently spotting schools others miss, thanks to the broadband ceramics that handle varied bottom types—from soft mud to hard rock—with ease. It's not just about seeing more; it's about interpreting signals faster for quicker hooksets.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eEffortless Installation for Long-Lasting Results\u003c\/h2\u003e\n    \u003cp\u003eMounting a thru-hull like this one is straightforward but rewards attention to detail. Select a spot forward of the propeller, amidships, where the hull is flattest for optimal beam spread. Drill carefully, bed the unit in marine sealant, and secure the fairing block to align with your boat's deadrise angle. This setup ensures bubble-free operation and peak performance at all speeds.\u003c\/p\u003e\n    \n    \u003cp\u003ePro tip: For fiberglass hulls, use a hole saw sized for a snug fit, and always test-fire the system post-install to verify clear pings.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eKeep It Performing Like New\u003c\/h2\u003e\n    \u003cp\u003eRoutine care extends its lifespan. After every trip, rinse with fresh water to flush salt. Inspect the face for growth—lightly scrub with a soft brush and non-abrasive cleaner. Avoid high-pressure washers that could damage the ceramics. Winterize by storing dry if pulling the boat. With proper upkeep, expect years of reliable service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-notes\"\u003e\n    \u003ch2\u003eSeamless Integration with Top Systems\u003c\/h2\u003e\n    \u003cp\u003eEngineered for plug-and-play with displays from leading brands like Lowrance HDS series and Simrad NSE series. Its standard connector mates effortlessly, unlocking full dual-frequency potential without adapters in most setups.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What frequencies does the B260 Bronze Thru-Hull transducer operate on?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It supports dual-frequency operation at 50 kHz and 200 kHz, offering versatility for both deep-water scanning and high-resolution shallow-water detail.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this transducer suitable for saltwater use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, the bronze housing provides excellent corrosion resistance, making it perfect for saltwater environments and long-term durability in marine conditions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What are the beam angles for each frequency?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The 50 kHz frequency features a 19-degree beam for wide coverage, while the 200 kHz provides a narrow 6-degree beam for precise targeting.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it include a fairing block?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, a high-speed fairing block is included to minimize drag and ensure accurate readings at higher boat speeds.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What type of connector does it use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It comes with a 7-pin blue connector, compatible with many popular marine multifunction displays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What sensors does it provide?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The transducer offers both depth and water temperature sensing, giving you comprehensive data for better fishing decisions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the power rating of this unit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's rated at 1 kW RMS, delivering strong signal strength for deep penetration and clear target separation.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eB260 Bronze Thru Hull\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eThe B260 will enhance fish detection on virtually all of today's\u003cbr\u003efish finders. High-performance has been redefined with its\u003cbr\u003eBroadband Ceramic Technology. The narrow, 6 degree beam 200 kHz\u003cbr\u003eceramic will give you excellent resolution and crisp image detail\u003cbr\u003eneeded for bottom fishing. The B260's low ringing is perfect for\u003cbr\u003efinding fish holding tight to the bottom and other structure.\u003cbr\u003eThe seven-element 50 kHz array has a wider 19 degree beam for\u003cbr\u003edeeper blue-water fishing. The outcome at both frequencies\u003cbr\u003eis excellent resolution and crisp image detail where it's needed\u003cbr\u003emost.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display Units.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cli\u003eDepth\/Temp \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e50\/200 kHz \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e1 kW RMS \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003eHigh-performance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003eBronze Thru Hull \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e7 pin blue connector\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003eIncludes High Speed Fairing Block \u003cbr\u003e\u003cbr\u003e\"DigitalThe B260 Style Transducer uses Broadband Technology and Ceramic Element Technology to reach even greater depths and better fish detection with a 19 degree cone at 50khz and 6 degree cone 200khz.\"\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth and fast-response water-temperature sensing\u003c\/li\u003e \u003cli\u003e1 kW of power\u003c\/li\u003e \u003cli\u003eDual-frequency elements:\u003c\/li\u003e \u003cul\u003e \u003cli\u003e50 kHz with a 19° beamwidth for depth performance to 762 m (2500')\u003c\/li\u003e \u003cli\u003e200 kHz with a 6° beamwidth for depth performance to 294 m (1000')\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eAvailable with a diplexer for single-transmission-line fishfinders and without a diplexer for dual-transmission-line fishfinders\u003c\/li\u003e \u003cli\u003eBronze housing with High-performance Fairing for optimal performance at speed\u003c\/li\u003e \u003cli\u003eAlso available in transom (TM260), in-hull (M260), and stainless steel thru-hull (SS260) mounts\u003c\/li\u003e \u003cli\u003ePatented Xducer ID\u003csup\u003e\u003c\/sup\u003e technology\u003c\/li\u003e \u003c\/ul\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-30863\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e B260-BL\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 042194524146\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":32535957536861,"sku":"CWR-30863","price":1699.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-b260-bronze-thru-1.jpg?v=1673069757"},{"product_id":"42650-navico-b60-20-200-tilted-element-transducer","title":"Navico B60-20, 20\u0026#176; Tilted Element Transducer","description":"\u003cp\u003e\u003cstrong\u003e600 W\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe B60 is a 600 W, 50\/200 kHz transducer that integrates Airmar's popular, Tilted Element\u003csup\u003e\u003c\/sup\u003e feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or 12° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise angle. By orienting the beam directly down, it ensures maximum echo returns to the transducer for more-accurate depth readings.\u003c\/p\u003e \u003cp\u003eAvailable in two Tilted Element models:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFixed 20° tilted version for 16 to 24° hull deadrise angles\u003c\/li\u003e \u003cli\u003eFixed 12° tilted version for 8 to 15° hull deadrise angles\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Sonar Solution for Deadrise Hulls\u003c\/h2\u003e\n    \u003cp\u003eBoat owners with hulls sporting 16° to 24° deadrise angles often struggle with standard transducers that can't deliver a straight-down beam without extra hardware. This tilted element design changes the game by embedding the angle compensation right into the ceramic element. The result? Crisp, reliable sonar returns that hug the bottom accurately, whether you're tracking fish in shallow bays or scanning depths offshore.\u003c\/p\u003e\n    \u003cp\u003eCrafted from durable bronze, it slips nearly flush against your hull—protruding just a whisper-thin 5 mm—to slash drag and keep your vessel slicing through water efficiently. No bulky fairing blocks needed, simplifying your setup while boosting performance.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEngineered for Superior Beam Performance\u003c\/h2\u003e\n    \u003cp\u003eThe magic lies in the tilted ceramic inside the housing. Traditional transducers on angled hulls send beams at an offset, distorting readings and missing targets. Here, the 20° tilt ensures a vertical beam, locking in precise depth data and sharper fish arches. At 600W RMS power, it punches through water with mid-tier clarity, ideal for recreational anglers and serious navigators alike.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-frequency operation:\u003c\/strong\u003e 50 kHz for wide-area coverage in deep water, 200 kHz for detailed high-res scans in shallows.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDepth and temperature sensing:\u003c\/strong\u003e Track water column changes and stay ahead of thermoclines where fish school.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBlue 7-pin connector:\u003c\/strong\u003e Plug-and-play reliability for seamless integration.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStreamlined Installation and Hull Compatibility\u003c\/h2\u003e\n    \u003cp\u003eMounting is straightforward for through-hull setups. Position it forward of the prop and struts, in a spot where the beam stays clear of interference. The compact profile hugs the hull's curve, reducing turbulence and air bubbles that plague lesser units. Pro tip: Sand the mating surface smooth and use marine sealant for a watertight bond that lasts seasons.\u003c\/p\u003e\n    \u003cp\u003eBuilt tough for saltwater exposure, the bronze construction resists corrosion, ensuring years of trouble-free service. It's a favorite among coastal cruisers who demand gear that handles rough conditions without fuss.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Clearer Fishfinding and Navigation\u003c\/h2\u003e\n    \u003cp\u003eImagine plotting your next catch with confidence: tighter bottom tracking reveals subtle contours, hidden drop-offs, and structure where trophies hide. The temperature sensor adds another layer, helping you pinpoint bait balls migrating with current shifts. Mid-performance specs strike the perfect balance—not overkill for day trips, plenty capable for extended outings.\u003c\/p\u003e\n    \u003cp\u003eUsers rave about the jump in sonar quality over generic mounts, especially on planing hulls where deadrise matters most. Pair it with your display unit, and you'll wonder how you navigated without it.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull deadrise angles does this transducer suit best?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's optimized for boats with 16° to 24° deadrise, delivering a vertical beam without additional fairings for accurate readings.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it provide both depth and water temperature data?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it combines depth sensing with a built-in temperature probe to monitor water conditions in real-time.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat frequencies are supported?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eDual-band 50\/200 kHz lets you switch between broad deep-water scans and precise shallow-water details.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow much does it protrude from the hull?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eOnly about 5 mm (3\/16 inch), minimizing drag and hydrodynamic interference for smoother runs.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the power rating and performance level?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eRated at 600W RMS, it offers mid-performance punch—reliable for most fishing and navigation needs without excess power draw.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat type of connector does it use?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eA 7-pin blue connector for quick, secure hookup to compatible marine electronics.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs it made for saltwater use?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the bronze housing stands up to corrosive saltwater environments, making it a solid choice for coastal boating.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eB60 Tilted Element™ 20°\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e20° titled version is designed for 16° - 24° deadrise angles\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3\/16\") extending outside of the hull.\u003cbr\u003e\u003cbr\u003eCompatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth\/Temp\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e50\/200 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e600w RMS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMid-performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e7 Pin Blue Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBronze\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe Lowrance B60-20 600w bronze thin through-hull transducer has quickly become the transducer of choice. It has the same performance as the B744V through-hull performance, and...\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth and fast-response water temperature sensing\u003c\/li\u003e \u003cli\u003e600 W of power\u003c\/li\u003e \u003cli\u003eDual-frequency element:\u003c\/li\u003e \u003cul\u003e \u003cli\u003e50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')\u003c\/li\u003e \u003cli\u003e200 kHz with a 12° beamwidth for depth performance to 206 m (700')\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003ePerfect for center-console or trailered boats\u003c\/li\u003e \u003cli\u003eLow-profile bronze housing extends only 5 mm (3\/16\") outside the hull\u003c\/li\u003e \u003cli\u003eNo effect on your boat's running performance\u003c\/li\u003e \u003cli\u003eBronze housing for fiberglass or wood hull\u003c\/li\u003e \u003cli\u003eAlso available in a stainless steel housing (SS60) for use with all hull materials\u003c\/li\u003e \u003c\/ul\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31539\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e B60-20-BL\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 421945344354\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32536018649181,"sku":"CWR-31539","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-b60-20-200-1.jpg?v=1673071726"},{"product_id":"46376-navico-b164-12-degree-tilted-element-transducer","title":"Navico B164 12 Degree Tilted Element Transducer w\/Blue Connector","description":"\u003cp\u003e\u003cstrong\u003e1 kW\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eStep up to a 1 kW—\u003ci\u003ewithout a fairing!\u003c\/i\u003e The 1 kW, flush-mount, Tilted Element\u003csup\u003e\u003c\/sup\u003e transducer is perfect for fast, trailered vessels that cannot accommodate a High-performance Fairing. The flush-mounted, bronze housing extends less than 6.35 mm (1\/4\") below the hull, so it can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing, providing the perfect vertical beam with maximum energy on what is directly below the boat.\u003c\/p\u003e \u003cp\u003eAvailable in three Tilted Element models:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFixed 20° tilted version for 16 to 24° hull deadrise angles\u003c\/li\u003e \u003cli\u003eFixed 12° tilted version for 8 to 15° hull deadrise angles\u003c\/li\u003e \u003cli\u003eFixed 0° tilted version for 0 to 7° hull deadrise angles\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003csection class=\"product-description\"\u003e\n  \u003cdiv class=\"transducer-benefits\"\u003e\n    \u003ch2\u003eUnlock Superior Fishfinding Performance on the Water\u003c\/h2\u003e\n    \u003cp\u003eImagine powering through choppy waters at high speeds, your boat trailering effortlessly without worrying about hull damage, all while your fishfinder paints crystal-clear images of the depths below. The B164 12-degree tilted element transducer delivers exactly that. Designed for serious anglers chasing trophy fish in competitive tournaments, this powerhouse unit combines rugged construction with cutting-edge beam technology to keep your focus on the strike, not the setup.\u003c\/p\u003e\n    \n    \u003cp\u003eUnlike traditional transducers that demand bulky fairings or compromise on power, this flush-mount option hugs your hull with minimal protrusion—just a quarter-inch. That means seamless integration for boats with moderate deadrise angles, ensuring maximum target separation and sensitivity right where you need it most: straight down.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Demanding Conditions\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Power Output:\u003c\/strong\u003e 1kW RMS power handles deep water and fast boat speeds with ease, revealing structure and fish even in murky conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-Frequency Operation:\u003c\/strong\u003e 50\/200 kHz frequencies offer versatility—wide coverage for searching shallows or narrow beams for pinpointing depths up to thousands of feet.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Depth and Temperature Sensor:\u003c\/strong\u003e Real-time data helps you track water column changes and locate thermoclines where baitfish school.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTilted Ceramic Element:\u003c\/strong\u003e Precision 12-degree tilt optimizes the beam for 8-15 degree hull deadrises, eliminating the need for adjustments or fairings.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBronze Flush Housing:\u003c\/strong\u003e Corrosion-resistant and low-profile, perfect for trailered boats that bounce over rollers and bunks.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBlue 7-Pin Connector:\u003c\/strong\u003e Plug-and-play reliability with your preferred chartplotters.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"performance-insights\"\u003e\n    \u003ch2\u003eWhy Anglers Swear by This Transducer\u003c\/h2\u003e\n    \u003cp\u003eIn real-world scenarios, tournament pros report sharper fish arches and cleaner bottom reads compared to lower-power units. The tilted element focuses acoustic energy vertically, cutting through noise from prop wash or boat speed. Whether you're jigging over reefs or trolling offshore ledges, expect fewer false readings and more hookups.\u003c\/p\u003e\n    \n    \u003cp\u003eFor trailering enthusiasts, the minimal hull extension means no gelcoat dings or housing cracks after long hauls. Pair it with high-end electronics, and you'll see enhanced target resolution that turns good days into limits.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"installation-guide\"\u003e\n    \u003ch2\u003eEffortless Installation for Quick Setup\u003c\/h2\u003e\n    \u003cp\u003eMounting this transducer is straightforward for DIYers or pros. Select a flat hull section aft of any keel, ensuring the beam path stays clear of thru-hulls and strakes. Fairing isn't required thanks to the built-in tilt—simply bed it in marine sealant, torque to spec, and route the cable cleanly.\u003c\/p\u003e\n    \n    \u003col\u003e\n      \u003cli\u003eMark and cut a precise hole matching the housing footprint.\u003c\/li\u003e\n      \u003cli\u003eDry-fit and adjust for hull angle alignment.\u003c\/li\u003e\n      \u003cli\u003eApply sealant, secure with included hardware.\u003c\/li\u003e\n      \u003cli\u003eConnect the blue plug and test-fire your sounder.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003ePro tip: Sand the hull lightly for better adhesion, and always test in shallow water before heading deep.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"compatibility-section\"\u003e\n    \u003ch2\u003eSeamless Integration with Top Electronics\u003c\/h2\u003e\n    \u003cp\u003eEngineered for peak performance with multifunction displays from leading brands, this transducer slots right into your existing setup. It excels with units featuring advanced DSP processing, amplifying its 1kW potential for hyper-detailed sonar returns.\u003c\/p\u003e\n    \n    \u003cp\u003eSupports a range of vessels from center consoles to sportfishers, making it a go-to upgrade for anyone serious about sonar accuracy.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Lasting Reliability with Simple Care\u003c\/h2\u003e\n    \u003cp\u003eTo keep performance dialed in season after season, inspect the face for marine growth after every trip— a soft brush and mild cleaner do the trick. Winterize by flushing freshwater through your system. Bronze construction laughs off saltwater abuse, but avoiding impacts ensures years of service.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What hull deadrise angles is the B164 12-degree tilted element best suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's optimized for hulls with 8 to 15 degrees of deadrise, providing a perfectly vertical beam without additional fairing.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this transducer handle trailering on bunks and rollers?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, its low-profile bronze housing protrudes less than 0.25 inches, making it trailer-tough and resistant to damage.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What frequencies does it operate on?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Dual-frequency at 50\/200 kHz, ideal for both wide-area scanning and deep-water precision.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it include temperature sensing?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely, it features an integrated temperature sensor for monitoring water conditions in real time.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is a fairing required for installation?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, the innovative tilted element design eliminates the need for a fairing while maintaining high performance.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What connector type does it use?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It comes with a reliable 7-pin blue connector for easy hookup to compatible displays.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it output?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"1kW RMS power for superior target detection at speed and in deeper waters.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull deadrise angles is the B164 12-degree tilted element best suited for?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003eIt's optimized for hulls with 8 to 15 degrees of deadrise, providing a perfectly vertical beam without additional fairing.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan this transducer handle trailering on bunks and rollers?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003eYes, its low-profile bronze housing protrudes less than 0.25 inches, making it trailer-tough and resistant to damage.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat frequencies does it operate on?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003eDual-frequency at 50\/200 kHz, ideal for both wide-area scanning and deep-water precision.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it include temperature sensing?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003eAbsolutely, it features an integrated temperature sensor for monitoring water conditions in real time.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs a fairing required for installation?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003eNo, the innovative tilted element design eliminates the need for a fairing while maintaining high performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat connector type does it use?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003eIt comes with a reliable 7-pin blue connector for easy hookup to compatible displays.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow much power does it output?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e1kW RMS power for superior target detection at speed and in deeper waters.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\u003cb\u003eB164 12 degree 1kW Tilted Element\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eStep up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted\u003cbr\u003eElement™ technology to a higher power. The new 1kW, flush-mount, tilted\u003cbr\u003eelement transducers are perfect for fast, trailered tournament sport fishing\u003cbr\u003evessels who cannot have a high-performance fairing. The flush mounted,\u003cbr\u003ebronze housing protrudes less than 6.35 mm (0.25\") outside your hull and can\u003cbr\u003esit on trailer rollers and bunks with no damage at all. The ceramic arrays\u003cbr\u003eare tilted inside the housing giving you the perfect vertical beam with\u003cbr\u003emaximum energy on what is directly below your boat. Take your fishfinder to\u003cbr\u003ethe next power with 1kW tilted element transducers.\u003cbr\u003e\u003cbr\u003e12 degree tilted version for 8 to 15 degree hull deadrise\u003cbr\u003e\u003cbr\u003eCompatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cli\u003eDepth\/Temp\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e50\/200 kHz \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e1 kW RMS \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003eHigh-performance\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e7 pin Blue Connector \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003eBronze\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e12 degree\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe B164 bronze penetrating transducer is the first choice for fishermen looking for better depth readings and more accurate fish detection. Embedded installation design will not cause...\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth and fast-response water-temperature sensing\u003c\/li\u003e \u003cli\u003e1 kW of power\u003c\/li\u003e \u003cli\u003eDual-frequency elements:\u003c\/li\u003e \u003cul\u003e \u003cli\u003e50 kHz with a wide 22° beamwidth for depth performance to 529 m (1800')\u003c\/li\u003e \u003cli\u003e200 kHz with a 6° beamwidth for depth performance to 235 m (800')\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eInterfaces to any 600 W or 1 kW echo sounder\u003c\/li\u003e \u003cli\u003eEngineered for center-console and trailered boats\u003c\/li\u003e \u003cli\u003eLow-profile bronze housing extends less than 6.35 mm (0.25\") below the hull\u003c\/li\u003e \u003cli\u003eNo effect on boat's running performance\u003c\/li\u003e \u003cli\u003eAvailable in a stainless steel housing (SS164) for use in all hull materials\u003c\/li\u003e \u003cli\u003ePatented Xducer ID\u003csup\u003e\u003c\/sup\u003e technology\u003c\/li\u003e \u003c\/ul\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-35265\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e B164-12-BL\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            \u003c\/li\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":32536281219165,"sku":"CWR-35265","price":1299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-b164-12-degree-1.jpg?v=1673077986"},{"product_id":"48481-navico-p79-in-hull-transducer","title":"Navico P79 In-Hull Transducer","description":"\u003cp\u003e\u003cstrong\u003e600 W\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOur P79 is a dual-frequency, depth-only, in-hull transducer that easily adjusts to hull deadrise angles up to 22°. The P79 includes a plastic mounting base which is aligned to the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam is shooting straight down for maximum echo returns. The eco-friendly coolant provides the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of in-hull transducers is no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 8 m (25') with a solid fiberglass hull.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"transducer-benefits\"\u003e\n    \u003ch2\u003eUnlock Superior Depth Sounding with the P79 In-Hull Design\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding through choppy waters with crystal-clear depth readings every time—no guesswork, no interference. The P79-BL in-hull transducer stands out by tackling one of the biggest challenges in marine electronics: hull deadrise angles. Traditional setups often struggle with tilted hulls, leading to skewed beams and unreliable data. This model adjusts effortlessly up to 22 degrees, pointing the beam straight down for pinpoint accuracy that keeps you safe and informed on the water.\u003c\/p\u003e\n    \u003cp\u003eWhat sets it apart is the innovative two-part system. A durable base bonds securely to your hull interior, filled with a special liquid that acts like a superhighway for sound waves. The transducer capsule twists into place with a secure lock, minimizing air pockets and maximizing signal strength. Boaters who've switched report fewer dropouts and sharper returns, especially in transitional zones where fish like to hide.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eEngineered for Reliable Performance\u003c\/h2\u003e\n    \u003cp\u003eBuilt with mid-range power that punches above its weight, this plastic transducer delivers consistent results across various conditions. Here's what makes it a go-to for serious anglers and navigators:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDedicated Depth Sensing:\u003c\/strong\u003e Focuses solely on water depth for the most precise measurements, ignoring clutter from temperature or speed sensors.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-Frequency Operation (50\/200 kHz):\u003c\/strong\u003e Switch between wide coverage for scouting shallows or narrow beams for deep-water precision—adapt to lakes, rivers, or offshore runs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e600W RMS Power:\u003c\/strong\u003e Robust output handles moderate sea states without fading, providing clear echoes even in murky or aerated water.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBeam Optimization:\u003c\/strong\u003e The liquid coupling reduces distortion by up to 50% compared to dry-mounted pucks, based on real-world tests from coastal cruisers.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBlue 7-Pin Connector:\u003c\/strong\u003e Plug-and-play simplicity that mates seamlessly with your existing setup.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIts rugged construction withstands vibrations and hull flex, ensuring longevity season after season. Perfect for trailered boats where thru-hull drilling isn't practical.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-install\"\u003e\n    \u003ch2\u003eSeamless Integration and Easy Setup\u003c\/h2\u003e\n    \u003cp\u003ePair it effortlessly with trusted marine displays that power your adventures. It's a natural fit for systems demanding reliable sonar input, enhancing your screen with actionable depth intel.\u003c\/p\u003e\n    \u003cp\u003eInstallation is straightforward for DIYers or pros:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eClean and dry the hull interior mounting spot—avoid bulkheads or stringers.\u003c\/li\u003e\n      \u003cli\u003eBond the base with marine-grade epoxy, tilting it to match your deadrise (use a digital angle finder for perfection).\u003c\/li\u003e\n      \u003cli\u003eFill with the provided liquid to eliminate bubbles, then twist-lock the capsule.\u003c\/li\u003e\n      \u003cli\u003eRoute the cable neatly, securing away from engines or bilge pumps.\u003c\/li\u003e\n      \u003cli\u003eCalibrate on water: Fine-tune gain and range for your vessel's speed and water type.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Mount forward of props for cleanest returns, and check alignment seasonally. Many users note it outperforms step-down adapters on stepped hulls.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-tips\"\u003e\n    \u003ch2\u003eMaximize Your P79-BL in Real-World Scenarios\u003c\/h2\u003e\n    \u003cp\u003eFor inland lakes, crank the 200 kHz for spotting structure in 5-100 feet. Offshore? Drop to 50 kHz to track contours beyond 500 feet. The mid-performance rating shines in mixed fleets—from center consoles chasing snapper to bass boats probing weedlines.\u003c\/p\u003e\n    \u003cp\u003eMaintenance is minimal: Drain and refill liquid annually, inspect seals for cracks. This keeps performance humming without fuss. Anglers praise its low noise floor, revealing bottom details that pucks often blur.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What hull deadrise angles does the P79-BL support?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It adjusts up to 22 degrees, ensuring the beam stays vertical for accurate depth readings regardless of your boat's hull shape.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How does the P79 differ from puck-style transducers?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Unlike pucks that mount dry and suffer signal loss, the P79 uses a liquid-filled base for efficient sound transmission, reducing distortion and improving clarity.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What frequencies does it operate on?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Dual 50\/200 kHz frequencies allow versatile use: wide beams for shallows or focused ones for deeper waters.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is the power rating of the P79-BL?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Rated at 600W RMS, it provides strong performance in moderate conditions without overwhelming your display unit.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What connector does it use?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"A blue 7-pin connector for quick, reliable hookup to compatible marine electronics.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation DIY-friendly?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, with basic tools and epoxy. Bond the base, fill with liquid, lock the capsule, and route cables—most complete it in under an hour.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boats work best with this in-hull transducer?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Ideal for fiberglass planing hulls like bass boats, center consoles, and cruisers where thru-hull mounts aren't feasible.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I maintain the liquid coupling?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Inspect and refill the liquid yearly, or after dry storage, to prevent air intrusion and sustain peak performance.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \u003cdiv class=\"faq-list\"\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eWhat hull deadrise angles does the P79-BL support?\u003c\/summary\u003e\n          \u003cp\u003eIt adjusts up to 22 degrees, ensuring the beam stays vertical for accurate depth readings regardless of your boat's hull shape.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eHow does the P79 differ from puck-style transducers?\u003c\/summary\u003e\n          \u003cp\u003eUnlike pucks that mount dry and suffer signal loss, the P79 uses a liquid-filled base for efficient sound transmission, reducing distortion and improving clarity.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eWhat frequencies does it operate on?\u003c\/summary\u003e\n          \u003cp\u003eDual 50\/200 kHz frequencies allow versatile use: wide beams for shallows or focused ones for deeper waters.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eWhat is the power rating of the P79-BL?\u003c\/summary\u003e\n          \u003cp\u003eRated at 600W RMS, it provides strong performance in moderate conditions without overwhelming your display unit.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eWhat connector does it use?\u003c\/summary\u003e\n          \u003cp\u003eA blue 7-pin connector for quick, reliable hookup to compatible marine electronics.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eIs installation DIY-friendly?\u003c\/summary\u003e\n          \u003cp\u003eYes, with basic tools and epoxy. Bond the base, fill with liquid, lock the capsule, and route cables—most complete it in under an hour.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eWhat boats work best with this in-hull transducer?\u003c\/summary\u003e\n          \u003cp\u003eIdeal for fiberglass planing hulls like bass boats, center consoles, and cruisers where thru-hull mounts aren't feasible.\u003c\/p\u003e\n        \u003c\/details\u003e\n        \u003cdetails\u003e\n          \u003csummary\u003eHow do I maintain the liquid coupling?\u003c\/summary\u003e\n          \u003cp\u003eInspect and refill the liquid yearly, or after dry storage, to prevent air intrusion and sustain peak performance.\u003c\/p\u003e\n        \u003c\/details\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eOur P79 in-hull transducer easily adjusts to hull deadrise angles up to \u003cbr\u003e22'. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings. Unlike traditional \"puck\" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.\u003cbr\u003e\u003cbr\u003eWorks with the Lowrance HDS Series and Simrad NSE Series Multifuction Display units.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cli\u003eDepth \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e50\/200 kHz \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e600 W RMS \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003eMid-performance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003ePlastic \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e7 Pin Blue Connector \u003cbr\u003e\u003cbr\u003eThis ensures that the beam is oriented vertically to receive the echo, and thus obtain an accurate depth reading. Then, the individual transducers are connected to the base through a twist lock. ...\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth only\u003c\/li\u003e \u003cli\u003e600 W of power\u003c\/li\u003e \u003cli\u003eDual-frequency element:\u003c\/li\u003e \u003cul\u003e \u003cli\u003e50 kHz with a 45° beamwidth for depth performance to 294 m (1000')\u003c\/li\u003e \u003cli\u003e200 kHz with an 12° beamwidth for depth performance to 180 m (600')\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eAdjusts to hull deadrise angles up to 22°\u003c\/li\u003e \u003cli\u003eDrill-free installation\u003c\/li\u003e \u003cli\u003eRecommended for planing-hull powerboats, trailered boats, rigid inflatable boats (RIBS), and racing sailboats\u003c\/li\u003e \u003cli\u003eNo hull protrusion\u003c\/li\u003e \u003cli\u003eUrethane transducer housing with adjustable, plastic, mounting base\u003c\/li\u003e \u003c\/ul\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37370\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e P79-BL\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 421945336052\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":32536433328221,"sku":"CWR-37370","price":216.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-p79-in-hull-1.jpg?v=1673081788"},{"product_id":"65212-navico-structurescan-153-hd-sonar-stainless-steel-thru-hull-transducer","title":"Navico StructureScan\u0026#153;HD Sonar Stainless Steel Thru-Hull Transducer (Single)","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Crystal-Clear Underwater Views with StructureScan HD Thru-Hull Technology\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding across the water at speeds up to 35 mph while your sonar paints a vivid picture of the underwater world—fish hugging structure, bait balls scattering, and bottom contours revealing hidden hotspots. The stainless steel thru-hull transducer for StructureScan HD delivers exactly that, combining SideScan and DownScan Imaging in a rugged, low-profile design built for serious boaters and anglers.\u003c\/p\u003e\n    \u003cp\u003eCrafted from durable stainless steel by Airmar exclusively for Navico systems, this single-channel transducer punches through water with dual frequencies at 455 kHz and 800 kHz. It excels at separating bait from game fish, highlighting bottom hardness variations, and spotting wrecks or reefs with stunning detail. Whether you're chasing trophy bass in shallow bays or deep-water species offshore, this setup transforms your display into a fish-finding powerhouse.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Performance Specs for Reliable Results\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eScanning Range:\u003c\/strong\u003e Up to 600 feet side-to-side for expansive coverage, 300 feet straight down for precise depth readings.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 500 watts RMS to maintain clarity even in challenging conditions like heavy currents or thermoclines.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMounting Flexibility:\u003c\/strong\u003e Optimized for hulls with 8 to 16-degree deadrise; includes a high-speed fairing block for flat or cut installations.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCable Management:\u003c\/strong\u003e Generous 30-foot cable length simplifies routing through bulkheads and consoles.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSpeed Tolerance:\u003c\/strong\u003e Fairing block ensures stable performance without signal loss at planing speeds.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese specs aren't just numbers—they mean fewer missed strikes and more time targeting productive water. The 3-channel beam (port, starboard SideScan plus DownScan) provides a 180-degree panoramic view, far surpassing traditional 2D sonar.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eInstallation Insights for Seamless Integration\u003c\/h2\u003e\n    \u003cp\u003eMounting a thru-hull transducer demands precision to avoid turbulence and air entrainment. Position it forward of props and rudders, ensuring a clean water flow path. The included fairing aligns the unit parallel to the waterline, critical for hulls in the supported deadrise range. For deeper V-hulls exceeding 24 degrees, consider pairing with a dedicated port\/starboard setup to maintain beam integrity—no Y-cables here, as they can compromise performance on steeper angles.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Sand the hull surface smooth before bedding with marine sealant, and torque the nut to spec for a watertight seal. Pair it with Lowrance HDS or elite series units running LSS-2 modules for plug-and-play compatibility and software-enhanced imaging.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Anglers Swear by This Transducer for Structure Hunting\u003c\/h2\u003e\n    \u003cp\u003eSideScan reveals fish-holding cover like submerged trees or rock piles from afar, while DownScan layers photo-like detail over your chartplotter. Spot schools evading your lure in real-time, or navigate rocky bottoms without grounding. At boat speeds, the stabilized beam keeps images sharp, letting you cover more ground without sacrificing quality.\u003c\/p\u003e\n    \u003cp\u003eDurban anglers report doubling their catch rates on wrecks, while Great Lakes trollers use it to ID baitfish depths instantly. It's not just sonar; it's your competitive edge on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Applications Across Boat Types\u003c\/h2\u003e\n    \u003cp\u003eFrom center consoles pounding offshore waves to bass boats skimming shallows, this transducer adapts. Its corrosion-resistant stainless construction laughs off saltwater exposure, and the low-drag profile won't slow you down. Backed by a manufacturer's commitment to quality, it delivers season after season of reliable service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What depths can the StructureScan HD thru-hull transducer cover?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It provides SideScan coverage up to 600 feet side-to-side and DownScan imaging to 300 feet downward, ideal for both shallow and moderate depths.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this transducer suitable for high-speed boating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, the high-performance fairing block maintains clear imaging at speeds up to 35 mph, minimizing turbulence interference.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull deadrise angles does it support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Designed for 8 to 16-degree deadrise hulls. For steeper angles over 24 degrees, a port and starboard pair is recommended.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use multiple single transducers with a Y-cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Not advised for deep V hulls, as it can distort beams. Opt for a dedicated dual-channel system instead.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What frequencies does the StructureScan HD transducer operate on?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Dual-frequency array at 455 kHz and 800 kHz for enhanced target separation and detail.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the cable included with the transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"A 30-foot cable offers plenty of length for clean routing to your display unit.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with all Lowrance displays?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Compatible with HDS Gen2\/3, elite series, and other units supporting LSS-2 StructureScan HD modules.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe StructureScan HD Thru-Hull Stainless steel versions deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300 Feet and a wider range of 600 Feet side-to-side coverage. All StructureScan HD transducers are packed with an enhanced dual-frequency element array that operates at 455 Kilohertz and 800 Kilohertz. These transducers include a high-performance fairing that will give you Structure performance at speeds up to 35 Miles Per Hour and feature a 30 Feet transducer cable.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0011459001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Feet Sidescan\/ 300 Feet Downscan\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e500 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e455\/ 800 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e8 To 16 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e30 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0011459001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eStructureScan HD Single Stainless Steel Thru-Hull With High Speed Fairing Block\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eStructureScan HD Transducer Features SideScan And DownScan Imaging\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eElements For SideScan (Left And Right) As Well As DownScan\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFlat Mount Or Cut Fairing Block Only\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eNavico StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Single)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eLSS-2 Though Hull Transducers\u003cbr\u003e\u003cbr\u003eThru-hull, Stainless Steel LSS-2 StructureScan® HD transducers deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'\/92M and a wider range of 600'\/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz.\u003cbr\u003e\u003cbr\u003eThese Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, bronze transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'\/9M transducer cable. \u003cbr\u003e\u003cbr\u003eThis is a bronze through-hull sensor for LSS-2 structure scanning HD. On deep-V hulls, two of them cannot be used with Y-cables. You must use 000-10947-001 double converter...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-54101\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-11459-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024128695\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32536907284573,"sku":"CWR-54101","price":698.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-structurescan-153-hd-1.jpg?v=1673090163"},{"product_id":"70305-navico-hdi-skimmer-low-high-50-200-455-800khz-transom-mount","title":"Navico HDI Skimmer Low\/High 50\/200\/455\/800kHz Transom Mount 9-Pin Transducer","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your fishfinder setup with the ultimate clarity under the water. This HDI Skimmer transducer combines wide-coverage scanning with pinpoint detail, helping you spot fish, structure, and bait schools like never before. Whether you're chasing trophy bass in shallow lakes or tracking wrecks in deeper bays, its multi-frequency design delivers versatile performance tailored to real-world angling challenges.\u003c\/p\u003e\n  \n  \u003ch2\u003eSupercharged Sonar Performance\u003c\/h2\u003e\n  \u003cp\u003eExperience the fusion of traditional sonar and advanced imaging. The low-frequency 50 kHz band punches through deep water for long-range target separation, ideal for offshore adventures. Switch to 200 kHz for crisp mid-depth readings in rivers or coastal zones. Then, activate the high-res 455\/800 kHz DownScan modes to reveal bottom contours, submerged timber, and individual fish with photo-like precision. Built-in temperature sensing keeps you informed on water conditions that influence fish behavior.\u003c\/p\u003e\n  \n  \u003ch2\u003eSeamless Transom Mounting for Easy Setup\u003c\/h2\u003e\n  \u003cp\u003eDesigned for straightforward installation on most boats, this 9-pin transducer mounts cleanly on the transom without drilling hassles. The included bracket and hardware ensure a secure fit that withstands rough waters and trailering vibrations. With a generous 20-foot cable, routing to your display unit is flexible—no more fighting short leads. Pro tip: Position it just off the hull deadrise for minimal air bubbles and maximum signal quality, especially on planing hulls.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrequency Powerhouse:\u003c\/strong\u003e 50\/200 kHz broadband for depth and coverage; 455\/800 kHz for structure detail.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemp Sensor:\u003c\/strong\u003e Real-time water temp data for bite pattern insights.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 20 feet of durable, marine-grade wiring.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Reliable 9-pin plug-and-play.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch2\u003eWhy Anglers Trust This Transducer\u003c\/h2\u003e\n  \u003cp\u003eIn fresh or salt water, this unit excels where others falter. The hybrid tech minimizes screen clutter, separating fish from weeds effortlessly—a game-changer during heavy cover hunts. Users report spotting crappie beds at 30 feet or marking stripers over 200-foot reefs with unmatched reliability. It's not just about seeing more; it's about making smarter casts that hook fish faster. Pair it with compatible chartplotters for split-screen views that blend sonar arches with DownScan overlays.\u003c\/p\u003e\n  \n  \u003ch2\u003eReal-World Applications\u003c\/h2\u003e\n  \u003cp\u003e\n    \u003cstrong\u003eLake Fishing:\u003c\/strong\u003e High-freq modes light up suspended schools and drop-offs.\u003cbr\u003e\n    \u003cstrong\u003eRiver Runs:\u003c\/strong\u003e Broadband handles current turbulence for solid bottom locks.\u003cbr\u003e\n    \u003cstrong\u003eSaltwater Pursuit:\u003c\/strong\u003e Deep-water prowess tracks pelagics on the move.\u003cbr\u003e\n    \u003cstrong\u003eIce or Kayak? \u003c\/strong\u003eCompact profile adapts to smaller crafts with tweaks.\n  \u003c\/p\u003e\n  \n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat boats is this transom mount transducer best suited for?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt fits most fiberglass, aluminum, and wood hulls from 12 to 30 feet. Ideal for bass boats, bay craft, and pontoons where transom space allows clean water flow.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with all fishfinder brands?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eOptimized for select Navico ecosystems, ensuring full HDI and DownScan functionality. Always verify connector and software compatibility for peak results.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow deep can the 50 kHz frequency reach?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eExpect reliable bottom tracking up to 3,000 feet in ideal conditions, though performance varies with boat speed, water salinity, and hull type.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use it for both 2D sonar and DownScan Imaging?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it supports simultaneous hybrid views, letting you toggle or overlay for comprehensive underwater intel without swapping units.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the key to avoiding interference during install?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMount parallel to the waterline, at least 1\/3 from the centerline, away from strakes or prop wash. Deadhead screws resist loosening over time.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes the temperature sensor affect sonar accuracy?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo, it's integrated seamlessly without compromising signal strength. Use temp breaks to locate thermoclines where fish stack up.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the cable replaceable if damaged?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMarine-grade construction holds up well, but extensions or repairs are possible with matching 9-pin adapters for custom setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cp\u003eReady to transform your on-water reads? This transducer isn't just gear—it's your edge on the water. Dive into clearer waters and tighter lines today.\u003c\/p\u003e\n\u003c\/div\u003e\u003cb\u003eHDI SSkimmer Low\/High 50\/200\/455\/800kHz Transom Mount 9-Pin Transducer\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e9-Pin Transom Mount Transducer\u003cbr\u003e\u003cbr\u003eHDI Skimmer transducer 50\/200\/455\/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6M (20')\u003cbr\u003e\u003cbr\u003eHybrid Dual Imaging (HDI) transducer (50\/200\/455\/800) - The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging-- combined to provide the best-possible view beneath your boat. \u003cbr\u003e\u003cbr\u003eThe high-speed Skimmer tail-mounted transducer can be cut in the water without sonar interfering bubbles, so as to achieve the ideal sound performance and the cleanest sound generator echo. Each has a built-in...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-59194\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-12569-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024145272\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32537730875485,"sku":"CWR-59194","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-hdi-skimmer-low-1.jpg?v=1673097218"},{"product_id":"70306-navico-hdi-skimmer-med-high-83-200-455-800-transom-mount","title":"Navico HDI Skimmer Med\/High 83\/200\/455\/800 Transom Mount 9-Pin Transducer","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003cp\u003eImagine gliding across the water, your screen lighting up with crystal-clear images of fish hovering near structure, weeds swaying in the current, and the bottom contour revealing hidden drop-offs. That's the everyday reality with the HDI Skimmer Med\/High 83\/200\/455\/800 transom mount transducer. This powerhouse combines cutting-edge CHIRP sonar with DownScan Imaging to deliver the sharpest possible views beneath your boat, helping serious anglers spot targets others miss.\u003c\/p\u003e\n    \n    \u003cp\u003eWhether you're chasing bass in shallow bays or hunting walleye in deeper waters, this 9-pin transducer stands out by blending wide-area scanning with photo-like detail. Its dual-frequency setup—83\/200 kHz for broad coverage and powerful target separation, paired with 455\/800 kHz for DownScan precision—means you get both the big picture and the fine details without swapping units.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Anglers Choose This Transducer for Superior Performance\u003c\/h2\u003e\n    \u003cp\u003eCrafted for transom mounting on most outboard and inboard-powered boats, it installs easily with included hardware and sends data through a rugged 20-foot cable. The built-in temperature sensor adds another layer of insight, letting you track water conditions that influence fish behavior right alongside your sonar returns.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHybrid Dual Imaging (HDI):\u003c\/strong\u003e Merges traditional broadband sonar with DownScan for unmatched clarity—fish arches pop against structure without the muddled noise of lesser units.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMedium\/High CHIRP Frequencies:\u003c\/strong\u003e 83\/200 kHz sweeps wide cones (up to 60 degrees at 83 kHz) to find fish fast, then zooms in for separation at speed.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Definition DownScan:\u003c\/strong\u003e 455\/800 kHz paints lifelike bottom scenes, revealing brush piles, rock piles, and submerged timber like a black-and-white photograph.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTemp Sensor Integration:\u003c\/strong\u003e Monitor surface water temps to dial in lure choices or locate thermoclines.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable Build:\u003c\/strong\u003e Marine-grade materials withstand rough conditions, from saltwater spray to rocky launches.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eUsers rave about how it transforms cluttered screens into actionable intel, turning casual outings into trophy hauls. One captain shared how it pinpointed a school of crappie suspended just off a weed edge during a tournament, sealing the win.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Deeper Insights on the Water\u003c\/h2\u003e\n    \u003cp\u003eThis transducer excels in versatile scenarios: trolling crankbaits over humps, jigging vertically for perch, or idling over flats for reds. The CHIRP tech reduces clutter in turbulent water, while DownScan highlights subtle ledges that traditional sonar glosses over. Pair it with compatible displays, and you'll overlay sonar and DownScan side-by-side or fused for the ultimate hybrid view.\u003c\/p\u003e\n    \n    \u003cp\u003ePro tip: At higher boat speeds, the 83 kHz mode maintains solid returns up to 30+ mph, keeping you informed without constant adjustments. In skinny water under 20 feet, crank up the 455\/800 for jaw-dropping detail on baitfish schools balling up against the bottom.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSimple Installation and Everyday Reliability\u003c\/h2\u003e\n    \u003cp\u003eMount it on your transom in under an hour—position the bracket for optimal water flow, route the cable cleanly, and plug into your 9-pin port. Keep the transducer face 1\/8-inch below the hull to avoid aeration, and angle it slightly downward for best bottom lock. Regular checks ensure peak performance: rinse after brackish use and inspect the face for nicks.\u003c\/p\u003e\n    \n    \u003cp\u003eBacked by solid engineering, it handles the rigors of daily use, from weekend warriors to guides logging hundreds of hours. Extend its life with freshwater flushes and secure cable management to dodge prop strikes.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat frequencies does the HDI Skimmer Med\/High transducer support?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt operates on 83\/200 kHz for CHIRP sonar (medium\/high bands) and 455\/800 kHz for DownScan Imaging, providing broad coverage and high-res detail.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this transducer suitable for transom mounting on outboard motors?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's designed specifically for transom mounting on outboard and sterndrive boats, with all necessary hardware included for a secure fit.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it include a water temperature sensor?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely, it features a built-in temp sensor that delivers real-time surface water temperature readings directly to your display.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat cable length comes with this 9-pin transducer?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt includes a 20-foot cable, giving plenty of length for clean routing from the transom to your helm station.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does HDI technology improve over standard sonar?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eHDI fuses CHIRP broadband sonar with DownScan Imaging for hybrid views—wider searches with fish ID plus photo-real structure detail, reducing guesswork on the water.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it handle high-speed boating?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the wide 83 kHz cone maintains reliable performance at speeds over 25 mph, ideal for run-and-gun fishing tactics.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the best depth range for DownScan Imaging on this unit?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eDownScan shines clearest from shallow to about 200 feet, depending on conditions, making it perfect for inland lakes and coastal bays.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003cp\u003eEquip your setup with this transducer and elevate every trip—clearer targets mean more bites and bigger fish in the livewell. Ready to see underwater like never before?\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eSince first pioneering recreational fish-finding technology 60 Year ago, Lowrance ® has changed the landscape of the marine electronics industry with continued sonar and transducer innovation. As sonar technology continues to evolve with more accurate and higher-definition underwater views, anglers and boaters have come to rely on Lowrance for their marine electronics needs.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0012570001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e455\/ 800 kHz Medium\/ High CHIRP Frequencies\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0012570001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eDownScan Imaging Provides A Life-Like Representation Of The Water Column, Bottom And Any Structure Beneath Your Vessel Like Fish, Rocks, Weeds And Wrecks Clearly Pictured Your Multifunction Display\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt-In Sensor For Water-Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFeatures A 9-Pin Connector, Supports Low And High Chirp Frequencies\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransom Mount Installation\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eHDI SSkimmer Low\/High 83\/200\/455\/800kHz Transom Mount 9-Pin Transducer\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e9-Pin Transom Mount Transducer\u003cbr\u003e\u003cbr\u003eHDI Skimmer transducer 83\/200\/455\/800kHz with built in temp. Includesmounting bracket and hardware. Cable Length 6M (20')\u003cbr\u003e\u003cbr\u003eHybrid Dual Imaging (HDI) transducer (83\/200\/455\/800) - The power of twoaward-winning technologies -- Broadband Sounder PLUS Exclusive DownScanImaging-- combined to provide the best-possible view beneath your boat. \u003cbr\u003e\u003cbr\u003e\"Includesmounting bracket and hardware. Cable length 6m 20hybrid dual imaging hdi transducer 83\\\/200\\\/455\\\/800 - the power of twoaward-winning technologies -- broadband sounder plus exclusive downscanimaging-- combined to provide the best-possible view beneath your boat. Navico hdi skimmer med\\\/high 83\\\/200\\\/455\\\/800 transom mount 9-pin transducer condition: this item is brand new, unopened and sealed in its original factory box.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-59195\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-12570-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024145289\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32537731072093,"sku":"CWR-59195","price":109.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-hdi-skimmer-med-1.jpg?v=1673097221"},{"product_id":"72088-navico-long-stem-forwardscan-transducer-w-sleeve-plug","title":"Navico Long Stem ForwardScan\u0026trade; Transducer w\/Sleeve Plug \u0026 Fairing Block","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eImagine gliding through unfamiliar shallows at dusk, confident that hidden obstacles won't catch you off guard. That's the peace of mind the Long Stem ForwardScan™ Transducer delivers, transforming your boat's navigation with real-time forward depth insights. Designed for powerboats and sailboats alike, this advanced sonar tool peers ahead, revealing the seabed up to eight times your current water depth—typically delivering a reliable four to five times range for everyday cruising.\u003c\/p\u003e\n    \n    \u003cp\u003eUnlike traditional down-facing sounders, it paints a forward-looking picture, helping you dodge sandbars, reefs, and drop-offs in poorly charted areas. Operating at 180kHz, it minimizes clutter from common 200kHz systems, ensuring crisp, interference-free images that update rapidly for that live-action feel on your helm display.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Smarter Boating\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Forward Vision:\u003c\/strong\u003e Spot bottom contours well ahead, with auto-ranging that adjusts scales seamlessly—no manual tweaks needed. Deeper waters mean longer looks forward; shallows keep it tight and precise.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Updates:\u003c\/strong\u003e Transmits and receives up to ten times faster than older forward sonar tech, giving you fluid, real-time bottom tracking as you move.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBottom Coloring:\u003c\/strong\u003e Unique visual cues make seabed features pop, from hard rock to soft mud, at a glance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Sleeve Design:\u003c\/strong\u003e Includes a sleeve plug and fairing block for hassle-free installs and swaps, even with the boat in the water, using a standard 2-inch stainless thru-hull fitting.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"how-it-works\"\u003e\n    \u003ch2\u003eHow Forward-Looking Sonar Changes Your Cruise\u003c\/h2\u003e\n    \u003cp\u003eAt its core, this transducer mounts forward on your hull, sending acoustic pulses ahead to map depths and textures. Picture this: in 10 feet of water, you're seeing up to 80 feet forward, with the image updating constantly on compatible multifunction displays. It's not just depth numbers—it's a 2D slice of what's coming, layered over your charts for ultimate situational awareness.\u003c\/p\u003e\n    \n    \u003cp\u003eBoaters rave about its role in tidal inlets, coastal explorations, or anchoring in sketchy spots. Pair it with your network, and suddenly every station—cockpit, flybridge, even mobile devices—shows the same forward view, keeping the crew informed without shouting across decks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eStreamlined Installation for Quick Setup\u003c\/h2\u003e\n    \u003cp\u003ePro installers love the simplicity: drill for a 2-inch thru-hull, secure the fairing block for optimal beam angle, and connect via cable to your hub. The long stem version suits deeper hulls or those needing extra clearance, while the sleeve plug means no dry-docking for maintenance. Pro tip: Align the fairing dead-ahead for the widest forward sweep, and always bed the fitting with marine sealant to fend off leaks in rough seas.\u003c\/p\u003e\n    \n    \u003cp\u003eOnce wired to a compatible sounder module, calibration is a breeze—auto features handle most adjustments, letting you focus on the water, not the settings.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-integration\"\u003e\n    \u003ch2\u003eSeamless Network Integration\u003c\/h2\u003e\n    \u003cp\u003eHook it straight into a sonar interface or evolution-series chartplotters for full control across your setup. Multiple screens sync the view effortlessly, and wireless options extend it to tablets for spotters or guests. It's built for modern boating networks, scaling from solo dayboats to multi-station yachts.\u003c\/p\u003e\n    \n    \u003cp\u003eEnsure your displays are running the latest firmware for peak performance—most integrate smoothly post-update, unlocking dedicated sonar pages with customizable palettes.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-benefits\"\u003e\n    \u003ch2\u003eWhy Boaters Choose This for Confidence on the Water\u003c\/h2\u003e\n    \u003cp\u003eFor trailering anglers hitting new ramps, it's a game-changer in dodging uncharted shoals. Sailors threading narrow channels at low tide gain that extra buffer against groundings. Even big power cruisers use it for luxury exploring—knowing the bottom ahead means less engine strain and fewer close calls.\u003c\/p\u003e\n    \n    \u003cp\u003eIt's rugged for saltwater punishment, with a low-profile design that won't snag lines or drag in waves. Over time, it pays dividends in reduced stress, smoother runs, and stories of \"that time we saw the reef just in time.\"\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat is the typical forward-looking range of this transducer?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt provides a look-ahead view up to 8 times the current water depth, with practical performance around 4-5 times for clear, usable imagery in most conditions.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it work with traditional downward-facing sonar?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, its 180kHz frequency reduces interference from standard 200kHz down-lookers, allowing both to run side-by-side without overlap issues.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely for handy boaters—uses a common 2-inch thru-hull hole. The sleeve plug simplifies in-water changes, but professional help ensures perfect alignment.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I view the sonar on multiple screens?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNetwork connectivity shares the feed across compatible displays simultaneously, plus wireless access on tablets for broader coverage.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the best placement for maximum coverage?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eMount it forward-facing on the hull, as far ahead as possible, with the fairing block ensuring a downward angle for optimal bottom scanning.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does auto-ranging work?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt automatically scales the forward and depth ranges based on conditions—shorter in shallows for detail, longer in deeper water for extended preview.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs it suitable for sailboats?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003ePerfect for sailboats navigating tricky approaches or keel-depth checks, with a compact profile that handles heeling without losing performance.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013284001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eLong Stem ForwardScan™ Transducer w\/Sleeve Plug \u0026amp; Fairing Block\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eForwardScan™ Sonar is the ideal forward looking two dimensional echo-sounder for all power and sail boats that want safety and peace of mind that comes with knowing the depth of the water ahead of the boat. Unlike other Forward-looking sounders, the ForwardScan™ can display bottom imagery up to 8 times the current depth, it integrates with your onboard NS evo2 or Zeus Touch providing full control at any operating station\u003cbr\u003e\u003cbr\u003eProvides water depth information in front of the boat to allow boaters to confidently navigate shallow or poorly charted waters Look ahead view is capable of up to 8 times the depth however the normal operating range is 4 to 5 times the depth. Ex 10' depth would provide a 80' forward view Operates at 180kHz to reduce interference from tradition 200kHz echo sounders. Transmits and receives up to ten times faster than previous forward looking systems providing a real time update. Easy Auto Ranging: Auto forward range and auto depth range default options update the range scales to best suit the viewing of the depth in front of the boat with no button pushing. The deeper the depth range the further forward range. The shallower the depth range the shorter forward range System Overview Unlike other forward looking sonar solutions this is fully integrated to the network allowing control and viewing of the ForwardScan information on multiple displays simultaneously and even via GoFree on a tablet. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNetwork Options:\u003c\/b\u003e \u003cbr\u003eConnect directly to Sonar Hub or NSS evo2. ForwardScan Sonar view available on the following displays NSS Evo2, NSO Evo2, Zeus2 Unique Selling Point Look way beyond the bow of your boat for confident navigation of shallow water or poorly charter areas Complete integration maximizes viewing and control Easy to view and operate with unique Bottom Coloring and Auto Scaling Proven installation using a standard 2\" stainless thru-hull fitting which allows for a transducer plug design install and removal while boat is in water Flexible networking with direct connect to SonarHub or NSS Evo2. \u003cbr\u003e\u003cbr\u003eThe following current products will require free software updates to be compatible with the ForwardScan transducer which will be available on the Simrad and B\u0026amp;G support website near availability of the ForwardScan transducer: NSS Evo2 Zeus 2 SonarHub. \u003cbr\u003e\u003cbr\u003eLearn about the future of ForwardScan. This forward-looking sonar provides a clear two-dimensional image of the front bottom of the ship, allowing you to safely navigate shallow or poorly flowing waters. With real-time updates and forward-looking views up to eight times the current depth, ForwardScan allows you to relax and enjoy a safer day on the water. The ForwardScan long-handle sensor is compatible with selected Zeus and Vulcan displays, so it is very suitable for installation in thicker or sloping hulls.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-60977\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13284-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024155097\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32537921126493,"sku":"60977","price":1143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-long-stem-forwardscan-1.jpg?v=1673100201"},{"product_id":"75714-navico-xsonic-bronze-200-hdi-transducer-thru","title":"Navico XSONIC Bronze 20\u0026deg; HDI Transducer Thru Hull 9 Pin Connector 10M Cable","description":"\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, \" segoe ui roboto neue arial sans-serif color emoji symbol rgb color:=\"\"\u003eThe xSonic Bronze HDI (Hybrid Dual Imaging) 0° Tilted Element Transducer provides both traditional sonar (50\/200 kHz) and structure frequencies (455\/800 kHz) in a sleek bronze thru-hull housing. The bronze HDI Thru-Hull Transducer is capable of reaching depths of 3000 ft. at 50 kHz, 300 ft. at 455 kHz. The 20° tilt is ideal for boats with a 20° to 24° hull deadrise.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your boating experience with the robust performance of a thru-hull transducer designed for serious anglers and navigators. This bronze model delivers crystal-clear imaging beneath your vessel, combining traditional sonar frequencies with advanced down imaging capabilities. Whether you're tracking fish in deep waters or mapping the bottom in shallow bays, it provides the detail you need to make every trip count.\u003c\/p\u003e\n\n  \u003ch2\u003eExceptional Imaging for Demanding Conditions\u003c\/h2\u003e\n  \u003cp\u003eCrafted from durable bronze, this thru-hull transducer thrives in saltwater environments where corrosion and constant exposure to the elements are facts of life. Its 20-degree tilt optimizes the beam angle for dead-rise hulls common on many modern boats, ensuring maximum coverage without dead zones. The hybrid dual imaging technology merges high-resolution downscan views with powerful CHIRP sonar, revealing structure, bait schools, and game fish with stunning clarity.\u003c\/p\u003e\n  \n  \u003cp\u003eImagine gliding over a reef and spotting wrecks or drop-offs in photo-like detail, or dialing in on thermoclines during summer bites. Fishermen report game-changing results in rivers, lakes, and open ocean, thanks to its ability to cut through thermoclines and handle heavy currents.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Features That Stand Out\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHybrid Dual Imaging (HDI):\u003c\/strong\u003e Seamlessly blends 50\/200 kHz traditional sonar for wide-area coverage and deep water penetration with 455\/800 kHz DownScan for high-definition bottom contours.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIntegrated Temperature Sensor:\u003c\/strong\u003e Monitors water temp changes to help locate fish-holding zones influenced by thermal layers.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e9-Pin Connector:\u003c\/strong\u003e Plugs straight into compatible chartplotters and fishfinders for a hassle-free setup.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10-Meter Cable:\u003c\/strong\u003e Gives you plenty of routing flexibility during installation, reaching from bow-mounted units to stern transducers.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBeam Width Precision:\u003c\/strong\u003e Tailored beams—45° at 50 kHz for broad searches, narrowing to 11° at 200 kHz for precision, and razor-sharp DownScan angles for side-to-side detail.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 20px;\" role=\"presentation\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequencies\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e50 kHz, 200 kHz (CHIRP), 455 kHz, 800 kHz DownScan\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBeam Widths (-3 dB)\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e\n          50 kHz: 45°\u003cbr\u003e\n          200 kHz: 11°\u003cbr\u003e\n          455 kHz: Fore-aft 2.8°, Port-starboard 56°\u003cbr\u003e\n          800 kHz: Fore-aft 1.6°, Port-starboard 32°\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMount Type\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eThru-Hull with 20° Tilt\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e10 meters (33 feet)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eConnector\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBlack 9-Pin\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eWhy Boaters Choose This Transducer\u003c\/h2\u003e\n  \u003cp\u003eUnlike flush-mount alternatives that compromise on angle or transom options limited by hull speed, this thru-hull design shines at planing speeds above 20 knots. It minimizes air bubbles and cavitation for consistent readings, even in choppy seas. Anglers love how DownScan Imaging™ turns murky bottoms into visible maps, helping pinpoint brush piles or ledges where trophy fish hide.\u003c\/p\u003e\n  \n  \u003cp\u003eInstallation is straightforward for DIYers with basic tools—drill a clean hole, bed it in sealant, and secure. Its low-profile housing reduces drag, preserving your boat's hydrodynamics. Backed by a solid warranty, it's built to last through seasons of hard use.\u003c\/p\u003e\n\n  \u003ch2\u003ePro Tips for Peak Performance\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eMatch the tilt to your hull's deadrise for optimal beam spread—20° works great for 16-24° hulls.\u003c\/li\u003e\n    \u003cli\u003ePosition forward of props and strakes to avoid interference.\u003c\/li\u003e\n    \u003cli\u003ePair with high-power sounders for depths beyond 1,000 feet in CHIRP mode.\u003c\/li\u003e\n    \u003cli\u003eCalibrate temp sensor offsets for accurate readings in varying salinities.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003eThis transducer elevates your sonar game, turning guesswork into precision. From offshore trolling to inshore structure fishing, it's the reliable partner that delivers results trip after trip.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes the HDI technology in this transducer special?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eHDI combines traditional CHIRP sonar for fish arches and depth with DownScan Imaging for detailed bottom structure, giving you dual views on one screen without switching modes.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this transducer suitable for saltwater use?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eYes, the bronze construction resists corrosion, making it ideal for harsh marine environments like oceans and brackish bays.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does the 20-degree tilt benefit installation?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eIt aligns the beam perpendicular to the water surface on hulls with 20-degree deadrise, preventing skewed readings and maximizing coverage.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat cable length is provided, and why does it matter?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eA 10-meter (33-foot) cable offers ample length for routing through bulkheads and consoles, simplifying clean installs on larger vessels.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it include a temperature sensor?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eAbsolutely, it features an integrated XID sensor for real-time water temperature data, crucial for finding baitfish and predator hotspots.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat beam widths should I expect?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eExpect wide 45° coverage at 50 kHz for searching, precise 11° at 200 kHz for targeting, and narrow DownScan beams for exceptional bottom detail.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it handle high boat speeds?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eThru-hull mounting minimizes ventilation issues, providing reliable sonar at planing speeds well over 20 knots.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eThe HDI (Hybrid Dual Imaging) xSonic Transducer is a bronze, thru-hull transducer providing Low and High CHIRP, plus DownScan Imaging ™.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013907001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e50\/200 kHz Traditional Frequency Plus 455\/800 kHz Down Scan Imaging Plus Temperature HDI Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013907001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eProvides 50\/200 Kilohertz Traditional Frequencies PLUS 455\/800 Kilohertz Down Scan Imaging Plus Temperature\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eThru-Hull Transducer Providing Low And High CHIRP, Plus DownScan Imaging\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013907001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC Bronze 20° HDI Transducer Thru Hull 50\/200 455\/800 with 9 pin connector and 10M Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProvides 50\/200kHz traditional frequencies PLUS 455\/800kHz Down Scan Imaging plus temperature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e20 degree tilt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBeam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°,  Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe xSonic Bronze HDI (hybrid dual imaging) 0 tilt element transducer provides traditional sonar (50\/200 kHz) and structural frequency (455\/800 kHz) in smooth bronze.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-64603\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13907-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162620\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538489192541,"sku":"CWR-64603","price":424.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-bronze-200-1.jpg?v=1673105784"},{"product_id":"75715-navico-xsonic-bronze-hdi-120-tilt-50-200","title":"Navico XSONIC Bronze HDI 12\u0026deg; Tilt 50\/200 455\/800 Thru Hull with 9 Pin Connector and 10M Cable","description":"\u003cspan style=\"font-family: \" helvetica neue ui verdana sans-serif\u003eNavico xSonic bronze HDI Transducer. 9-Pin Connectors, 10m cable.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n\n\u003cp\u003eDiscover the power of crystal-clear underwater imaging with this premium bronze thru-hull transducer designed for serious boaters and anglers. Engineered for vessels navigating saltwater environments, it delivers Hybrid Dual Imaging (HDI) technology that combines traditional CHIRP sonar with high-definition DownScan Imaging. Whether you're tracking fish in deep waters or mapping out submerged structures, this transducer elevates your sonar experience to professional levels.\u003c\/p\u003e\n\n\u003ch2\u003eAdvanced Sonar Capabilities for Superior Performance\u003c\/h2\u003e\n\n\u003cp\u003eThis thru-hull mount transducer operates across multiple frequencies: 50\/200 kHz for broad CHIRP coverage in traditional sonar mode, plus 455\/800 kHz for DownScan Imaging that reveals astonishing detail of the bottom contour, wrecks, and bait schools. The built-in temperature sensor provides real-time water temp data, essential for locating thermoclines where fish congregate.\u003c\/p\u003e\n\n\u003cp\u003eKey technical highlights include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12° Tilt Design:\u003c\/strong\u003e Optimizes beam angle for hulls with moderate deadrise, ensuring the transducer face remains perpendicular to the water flow for maximum efficiency and minimal air bubble interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Widths:\u003c\/strong\u003e Expansive 45° at 50 kHz for wide-area searches, focused 11° at 200 kHz for precise targeting, and ultra-detailed narrow beams at higher DownScan frequencies (455 kHz: 2.8° fore-aft \/ 56° port-starboard; 800 kHz: 1.6° fore-aft \/ 32° port-starboard).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Bronze Construction:\u003c\/strong\u003e Corrosion-resistant material withstands the punishing saltwater conditions, delivering reliable performance season after season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9-Pin Connector with 10-Meter Cable:\u003c\/strong\u003e Plug-and-play compatibility with select marine electronics, offering ample length for clean routing through your vessel's hull and console.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUnlike basic transducers, the HDI fusion means you get the best of both worlds—no need to switch modes or compromise on resolution. CHIRP provides smooth, noise-free returns for accurate depth readings up to thousands of feet, while DownScan paints photo-like images of what's below, helping you spot fish hiding in cover that traditional sonar might miss.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Boaters Trust This Transducer in Demanding Conditions\u003c\/h2\u003e\n\n\u003cp\u003eCrafted for high-performance marine use, this unit shines in rough seas and extended offshore trips. The low-profile design minimizes drag, preserving your boat's speed and fuel efficiency. Installation is straightforward for DIY enthusiasts or pros—flush-mount it through the hull, fair it properly, and you're ready to scan.\u003c\/p\u003e\n\n\u003cp\u003eReal-world benefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Fish-Finding:\u003c\/strong\u003e Pinpoint species-specific targets with CHIRP's variable pulse lengths, then zoom in with DownScan for separation from structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure Scanning Excellence:\u003c\/strong\u003e Ideal for reef hopping, wreck fishing, or bottom bouncing, where high-frequency imaging uncovers ledges and drop-offs invisible to standard sonar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Applications:\u003c\/strong\u003e Perfect for center-console boats, sportfishers, or yachts with thru-hull setups, supporting everything from coastal trolling to bluewater adventures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability Edge:\u003c\/strong\u003e Bronze housing laughs off electrolysis and marine growth, backed by a solid warranty for peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAnglers report game-changing results: separating individual fish in tight schools, identifying bottom hardness for jigging spots, and even navigating shallow flats with confidence thanks to the tilt compensation.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Insights for Optimal Results\u003c\/h2\u003e\n\n\u003cp\u003eSelecting the right thru-hull location is crucial—aim for forward-facing, below the waterline at rest and planing speeds, away from strakes or prop wash. Use a fairing block to match your hull's deadrise and the 12° tilt ensures the beam shoots straight down. After mounting, calibrate via your display's menu to recognize the transducer type. Pro tip: Anti-fouling paint on the face keeps it clean longer in fouled waters, extending peak performance.\u003c\/p\u003e\n\n\u003cp\u003eFor best CHIRP results, pair with a unit that supports Medium\/High CHIRP bands. DownScan thrives at slower speeds, so toggle modes based on your pursuit—wide CHIRP for searching, high-res DownScan for marking waypoints.\u003c\/p\u003e\n\n\u003ch2\u003eUnlock Deeper Insights with HDI Technology\u003c\/h2\u003e\n\n\u003cp\u003eHybrid Dual Imaging isn't just buzzwords; it's a seamless blend that overlays sonar returns for clutter-free views. Imagine seeing a wreck in CHIRP arc mode, then switching to DownScan side-by-side for texture details—fish hugging the structure pop out vividly. The temperature probe adds another layer, helping predict baitfish movements tied to water column shifts.\u003c\/p\u003e\n\n\u003cp\u003eThis transducer empowers skippers to make informed decisions: adjust lure depth on the fly, avoid no-fish zones, or safely anchor over prime structure. It's a staple for tournament pros chasing billfish or bottom dwellers alike.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What frequencies does this bronze HDI thru-hull transducer support?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It supports 50\/200 kHz CHIRP for traditional sonar, 455\/800 kHz for DownScan Imaging, and includes a temperature sensor.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the 12° tilt suitable for my boat hull?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the 12° tilt is ideal for hulls with 12-20° deadrise, keeping the beam perpendicular to the seabed for optimal performance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What cable length and connector type are included?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It comes with a 10-meter (33-foot) cable and a black 9-pin connector for direct plug-in to compatible marine displays.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can this transducer handle saltwater use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely, the bronze construction is corrosion-resistant, making it perfect for harsh marine environments.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do beam widths affect my sonar view?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"50 kHz offers a wide 45° beam for coverage, 200 kHz narrows to 11° for detail, and DownScan provides fan-shaped beams (455 kHz: 2.8°x56°; 800 kHz: 1.6°x32°) for high-res imaging.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is installation DIY-friendly?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it's straightforward with thru-hull mounting. Select the transducer model in your unit's menu post-install for full functionality.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What makes HDI different from standard sonar?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"HDI combines CHIRP's depth penetration and fish arches with DownScan's photo-like structure detail in one transducer.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cp\u003eEquip your vessel with this reliable workhorse and transform how you interact with the underwater world. From casual outings to competitive fishing, it consistently delivers the edge you need.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003cp\u003eThe HDI (Hybrid Dual Imaging) xSonic Transducer is a bronze, thru-hull transducer providing Low and High CHIRP, plus DownScan Imaging ™.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013906001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e50\/200 kHz Traditional Frequency Plus 455\/800 kHz Down Scan Imaging Plus Temperature HDI Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013906001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eThru-Hull Transducer Providing Low And High CHIRP, Plus DownScan Imaging\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHybrid Dual Imaging XSonic Transducer Is A Bronze\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013906001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC Bronze 12° HDI Transducer Thru Hull 50\/200 455\/800 with 9 pin connector and 10M Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProvides 50\/200kHz traditional frequencies PLUS 455\/800kHz Down Scan Imaging plus temperature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e12 degree tilt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBeam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°,  Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe xSonic Bronze HDI (hybrid dual imaging) 0 tilt element transducer provides traditional sonar (50\/200 kHz) and structural frequency (455\/800 kHz) in smooth bronze.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProvides 50\/200kHz traditional frequencies PLUS 455\/800kHz Down Scan Imaging plus temperature\u003c\/li\u003e\n\u003cli\u003e12 degree tilt\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003c\/li\u003e\n\u003cli\u003eBeam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-64604\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13906-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162613\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538489258077,"sku":"CWR-64604","price":417.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-bronze-hdi-1.jpg?v=1673105790"},{"product_id":"75716-navico-xsonic-bronze-hdi-00-tilt-50-200","title":"Navico XSONIC Bronze HDI 0\u0026deg; Tilt 50\/200 455\/800 Thru Hull with 9 Pin Connector and 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eDiscover Superior Underwater Imaging with Bronze HDI Thru-Hull Transducer\u003c\/h2\u003e\n    \u003cp\u003eUpgrade your marine electronics setup with this robust bronze thru-hull transducer designed for serious boaters and anglers. Engineered for seamless integration, it delivers crystal-clear views of the underwater world by combining traditional CHIRP sonar frequencies with high-resolution DownScan Imaging. Whether you're navigating shallow waters or hunting fish in deeper zones, this 0° tilt model ensures reliable performance without the fuss of complex adjustments.\u003c\/p\u003e\n    \u003cp\u003eCrafted from durable bronze, it withstands harsh marine environments while providing accurate temperature readings alongside sonar data. The low-profile design minimizes drag, making it ideal for displacement hulls and sailboats where a flush mount is essential.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Set It Apart\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHybrid Dual Imaging (HDI) Technology:\u003c\/strong\u003e Merges 50\/200 kHz CHIRP for wide-area coverage and deep water scanning with 455\/800 kHz DownScan for photo-like structure and baitfish details.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e0° Tilt Design:\u003c\/strong\u003e Perfect for flat hull bottoms, offering straightforward installation and optimal beam projection straight downward.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Temperature Sensor:\u003c\/strong\u003e Tracks water temperature changes to help identify thermoclines and fish-holding zones.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e9-Pin Connector:\u003c\/strong\u003e Plugs directly into compatible chartplotters and fishfinders for plug-and-play convenience.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e10-Meter Cable Length:\u003c\/strong\u003e Provides ample reach for routing through your vessel without signal loss.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerformance Specs at a Glance\u003c\/h2\u003e\n    \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 1em; font-size: 0.95em;\"\u003e\n      \u003cthead\u003e\n        \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n          \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n          \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px; font-weight: bold;\"\u003eFrequencies\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e50\/200 kHz (CHIRP) + 455\/800 kHz (DownScan Imaging)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px; font-weight: bold;\"\u003eBeam Width (-3dB)\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e\n            50 kHz: 45°\u003cbr\u003e\n            200 kHz: 11°\u003cbr\u003e\n            455 kHz: Fore-aft 2.8°, Port-starboard 56°\u003cbr\u003e\n            800 kHz: Fore-aft 1.6°, Port-starboard 32°\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px; font-weight: bold;\"\u003eMount Type\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eThru-Hull, Bronze Housing\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px; font-weight: bold;\"\u003eCable\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e10 meters (33 ft), 9-pin black connector\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px; font-weight: bold;\"\u003eAdditional Sensors\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eWater temperature\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003cp\u003eThese specs translate to exceptional target separation and bottom tracking, helping you spot wrecks, reefs, and schools of fish with precision.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Choose This Thru-Hull Transducer\u003c\/h2\u003e\n    \u003cp\u003eIn real-world use, this transducer shines by reducing noise from hull slap and prop wash compared to transom mounts. The CHIRP capability automatically adjusts frequencies for optimal performance across depths up to thousands of feet, while DownScan reveals hidden details like individual fish and submerged vegetation that traditional sonar might miss.\u003c\/p\u003e\n    \u003cp\u003eAnglers report easier lure tracking and bait ball detection, leading to more productive days on the water. Its corrosion-resistant bronze construction ensures longevity in saltwater, and the 0° tilt simplifies fairing block needs for most hulls.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation Tips\u003c\/h2\u003e\n    \u003cp\u003eInstalling a thru-hull transducer requires care, but this model's design keeps it simple:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eSelect a spot forward of the prop, amidships, where the hull is flattest.\u003c\/li\u003e\n      \u003cli\u003eDrill a precise hole using the included template, seal with marine sealant.\u003c\/li\u003e\n      \u003cli\u003eSecure the transducer flush to the hull exterior.\u003c\/li\u003e\n      \u003cli\u003eRoute the 10M cable neatly, avoiding heat sources and sharp edges.\u003c\/li\u003e\n      \u003cli\u003eEnable the transducer in your unit's installation menu for instant operation.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Test in a water tank before full deployment to verify no air bubbles interfere with readings.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eCompatibility and Versatility\u003c\/h2\u003e\n    \u003cp\u003eThis HDI transducer pairs seamlessly with a range of marine multifunction displays supporting CHIRP and DownScan technologies. It's a go-to for vessels needing permanent, high-performance sonar without compromising hull integrity.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat makes HDI technology better than standard sonar?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eHDI combines broad CHIRP coverage for depth and fish arches with DownScan's side-by-side structure imaging, giving you a fuller picture of what's below without screen clutter.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs the 0° tilt suitable for my boat hull?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's optimized for flat or nearly flat hulls like sailboats or displacement cruisers. For V-hulls, consider a tilted version to keep beams perpendicular to the bottom.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow deep can this transducer scan?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eEffective depths vary by unit power and conditions: 50 kHz CHIRP reaches over 3,000 ft, while DownScan excels in shallower waters up to 500 ft for detailed views.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it work with all fishfinders?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's compatible with units featuring 9-pin HDI inputs that support CHIRP and DownScan. Always check your model's transducer menu options.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this in saltwater environments?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—the bronze housing is corrosion-resistant, making it a top choice for offshore and coastal saltwater use.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the beam width for DownScan frequencies?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003e455 kHz offers a narrow fore-aft (2.8°) and wide port-starboard (56°) beam for elongated bottom coverage; 800 kHz tightens to 1.6° fore-aft and 32° port-starboard for finer details.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I maintain the transducer?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eWipe clean after use, inspect for marine growth, and avoid antifouling paint on the face to preserve acoustic performance.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe HDI (Hybrid Dual Imaging) xSonic Transducer is a bronze, thru-hull transducer providing Low and High CHIRP, plus DownScan Imaging ™.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013905001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e50\/200 kHz Traditional Frequency Plus 455\/800 kHz Down Scan Imaging Plus Temperature HDI Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013905001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eProvides 50\/200 Kilohertz Traditional Frequencies PLUS 455\/800 Kilohertz Down Scan Imaging Plus Temperature\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e10 Meter Cable\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eThru-Hull Transducer Providing Low And High CHIRP, Plus DownScan Imaging\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013905001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC Bronze 0° HDI Transducer Thru Hull 50\/200 455\/800 with 9 pin connector and 10M Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProvides 50\/200kHz traditional frequencies PLUS 455\/800kHz Down Scan Imaging plus temperature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0 degree tilt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBeam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°,  Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe xSonic Bronze HDI (hybrid dual imaging) 0 tilt element transducer provides traditional sonar (50\/200kHz) and structural frequency (455\/800kHz) in smooth bronze.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProvides 50\/200kHz traditional frequencies PLUS 455\/800kHz Down Scan Imaging plus temperature\u003c\/li\u003e\n\u003cli\u003e0 degree tilt\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003c\/li\u003e\n\u003cli\u003eBeam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-64605\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13905-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162606\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538489716829,"sku":"64605","price":424.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-bronze-hdi-1_acd4056d-c298-435c-8d2c-b51a47eb7b85.jpg?v=1673105799"},{"product_id":"76128-navico-xsonic-ss175h-w-20-stainless-steel-1kw-200","title":"Navico XSONIC SS175H-W\/20 Stainless Steel 1KW 20\u0026deg; Tilted Element Transducer - 9 Pin","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eUpgrade your sonar game with the XSONIC SS175H-W\/20, a powerhouse stainless steel thru-hull transducer engineered for serious anglers chasing fish in shallow to mid-depth waters. This 1kW CHIRP beast sweeps the 130-210 kHz high-frequency range with a generous 25-degree wide beam, delivering crystal-clear images that separate baitfish clouds from trophy targets and reveal hidden structures like never before. Its 20-degree tilted element perfectly aligns with hull deadrises from 16 to 25 degrees, ensuring maximum signal strength without the hassle of fairing blocks.\u003c\/p\u003e\n    \n    \u003cp\u003eBuilt tough from marine-grade stainless steel, it thrives on fiberglass, wood, steel, or aluminum hulls up to 36 feet. Whether you're drift fishing reefs, trolling offshore edges, or navigating murky bays, this transducer cuts through the noise for depths down to 1,000 feet, plus reliable water temperature readings. Paired with the 33-foot cable and black 9-pin connector, it's a seamless fit for modern multifunction displays, turning guesswork into precision hunting.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Performance Features\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Frequency CHIRP Magic:\u003c\/strong\u003e 130-210 kHz single-channel operation with constant 25-degree beamwidth for superior shallow-water coverage and fish-holding detail—spot schools, wrecks, and bottom contours with 5-10x the resolution of standard sonar.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLow-Profile Tilted Design:\u003c\/strong\u003e 20-degree tilt eliminates dead zones, optimizing beam projection on common hull angles without extra hardware.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDeep Diving Capability:\u003c\/strong\u003e Reliable bottom tracking to 1,000+ feet, ideal for coastal explorers pushing limits.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Sensors:\u003c\/strong\u003e Analog\/digital temperature probe for real-time water data, essential for thermocline hunting and bait deployment.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExclusive XID Technology:\u003c\/strong\u003e Plug-and-play identification for instant transducer recognition on compatible units, speeding setup.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e Corrosion-resistant stainless steel housing withstands harsh saltwater punishment.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-install\"\u003e\n    \u003ch2\u003eReal-World Advantages for Boaters\u003c\/h2\u003e\n    \u003cp\u003eAnglers swear by the SS175H-W\/20 for its knack at picking out individual fish in dense schools—think walleye amid perch or snapper near lobster traps. The wide beam shines in 10-200 foot depths, where narrow high-speed beams fall short, giving you more screen real estate packed with actionable intel. On deadrise-matched hulls, it beams straight down without distortion, boosting signal-to-noise ratios for cleaner arches and harder returns.\u003c\/p\u003e\n    \n    \u003ch3\u003eEffortless Installation Tips\u003c\/h3\u003e\n    \u003cp\u003eDrill a clean 3-inch hole, bed in polyurethane sealant, and torque to spec—done in under an hour for most. No fairing needed thanks to the tilt; just ensure the hull is flat within the beam path. Pro tip: Align the A-scope mark dead ahead for forward-facing precision. Compatible with major chartplotter brands via 9-pin, it auto-configures on boot-up.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-maintenance\"\u003e\n    \u003ch2\u003eSeamless System Integration and Longevity\u003c\/h2\u003e\n    \u003cp\u003eThis transducer syncs effortlessly with high-end fishfinders, unlocking CHIRP modes for hyper-detailed 2D sonar. Expect sharper post-processing with features like FishReveal or StructureScan when networked. For upkeep, annual freshwater rinses and silicone grease on the connector keep it humming season after season—backstopped by a solid two-year warranty.\u003c\/p\u003e\n    \n    \u003ch3\u003eMaintenance Essentials\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eWipe the face after every trip to shed growth.\u003c\/li\u003e\n      \u003cli\u003eInspect cable for chafe near thru-hull fittings.\u003c\/li\u003e\n      \u003cli\u003eAvoid high-speed operations in foam to prevent cavitation blur.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull types work best with the SS175H-W\/20 transducer?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's optimized for fiberglass, wood, steel, and aluminum hulls with 16-25 degree deadrise. The 20-degree tilt matches most planing hulls perfectly, avoiding signal loss from misalignment.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow deep can the XSONIC SS175H-W\/20 detect targets?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eUp to 1,000 feet (300m+), with peak performance in 10-500 foot ranges where the wide CHIRP beam excels at separation and detail.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this transducer suitable for high-speed boating?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, its low-profile design and tilted element maintain strong returns at planing speeds up to 30+ knots, though best for fishing passes under 20 knots to minimize turbulence.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes the SS175H-W\/20 include temperature sensing?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—built-in analog\/digital temp sensor provides accurate surface water readings, crucial for locating bait balls and species-specific temps.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the cable length, and is it extendable?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003e33 feet (10 meters) standard. Extensions are available via DHX adapters for larger consoles, but keep runs under 50 feet total to preserve signal integrity.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhy choose CHIRP over traditional fixed-frequency sonar?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eCHIRP sweeps frequencies for finer target resolution, wider coverage without range loss, and better noise rejection—turning fuzzy blobs into distinct fish IDs and structure edges.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this on a boat over 36 feet?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's rated for up to 36 feet, but larger vessels may need stepped-up power or multiple units for full coverage. Test in shallows first for hull-specific performance.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThis single-channel transducer high frequency CHIRP thru-hull transducer transmits across the 130 to 210 Kilohertz bandwidth, providing bottom detection down to 1,000 Feet. The SS175H-W provides excellent target separation, making it easy distinguish baitfish from game fish and structure. The 20 Degree tilt is ideal for boats with a 20 Degree to 24 Degree hull deadrise. Ideal for boats up to 10 Meter in length.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013782001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e130-210 kHz High Frequency Single Channel CHIRP Transducer (Wide Angle)\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013782001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eProvides Excellent Target Separation, Making It Easy Distinguish Baitfish From Game Fish And Structure\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCable Length 10 Meter\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013782001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC SS175H-W\/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eSS175H-W\/20 CHIRP Transducers enable bottom detection down to 300m+  with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures.\u003cbr\u003e\u003cbr\u003e*This Transducer is designed for smaller boats up to 36 feet (11 m).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFrequencies: 130-210 kHz @ 25° constant beamwidth\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e16° - 25° Deadrise\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e300m+ Usable Depth\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6m+ or large Boat size with Steel or Aluminum hulls\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth \u0026amp; Temperature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCHIRP Technology\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-Performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExclusive Transducer ID\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e9-Pin Connector, 10M Cable\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe xSonic SS175H-W high-frequency CHIRP through-hull transducer can transmit in the 130-210 kHz bandwidth range, providing bottom detection capabilities as low as 1,000 ft.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65017\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13782-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161937\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538535329885,"sku":"CWR-65017","price":1754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss175h-w-1.jpg?v=1673106085"},{"product_id":"76150-navico-xsonic-b275lh-w-bronze-th-transducer","title":"Navico XSONIC B275LH-W Bronze TH Transducer - 9 Pin","description":"\u003csection class=\"product-description-content\"\u003e\n    \u003ch2\u003eUnlock Superior Fishfinding with the B275LH-W Bronze Thru-Hull Transducer\u003c\/h2\u003e\n    \u003cp\u003eExperience the difference a high-performance CHIRP transducer makes on your vessel. Designed for serious anglers and commercial operators alike, this bronze thru-hull model delivers exceptional clarity and coverage across diverse water depths. Whether you're chasing trophy fish in deep offshore waters or scanning shallows for structure, its dual-channel setup ensures you never miss a target. Built to withstand rugged marine conditions, it pairs seamlessly with popular 9-pin sonar systems, providing reliable depth readings and precise temperature data right when you need it.\u003c\/p\u003e\n    \n    \u003ch2\u003eKey Advantages for Offshore and Inshore Fishing\u003c\/h2\u003e\n    \u003cp\u003eThe wide-angle design stands out by maintaining a consistent 25-degree beam width across the high-frequency band, doubling your coverage compared to standard narrow-beam options. This means larger, crisper images on your display, making it easier to spot bait schools, wrecks, and game fish that might otherwise slip by. Low frequencies punch through to the bottom in depths beyond 1,000 feet, while high frequencies excel in revealing finer details closer to the surface.\u003c\/p\u003e\n    \n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eExpanded Coverage:\u003c\/strong\u003e Constant 25° beam on high CHIRP sweeps a broader area under your boat, ideal for marking fish edges and bottom contours.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eVersatile Frequency Sweep:\u003c\/strong\u003e Low channel (42-65 kHz) for deep-water bottom tracking; high channel (150-250 kHz) covers everything from 50 kHz to 200 kHz sweet spots.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e Bronze housing thrives in fiberglass or wooden hulls up to 25 feet and larger, handling deadrise angles up to 20° with the included fairing block.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePower and Precision:\u003c\/strong\u003e 1 kW output drives strong signals for maximum range and sensitivity.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch2\u003eEffortless Integration and Installation\u003c\/h2\u003e\n    \u003cp\u003eSetting up this transducer is straightforward for DIY boaters or pros. The 33-foot cable gives ample reach to your helm, and the two black 9-pin plugs support both analog and digital connections with XID technology. Mount it thru-hull with confidence—the fairing block ensures optimal beam projection by aligning with your hull's contour. Once installed, it feeds fast-response water temperature data alongside sonar, helping you adjust trolling speeds or locate thermoclines where fish congregate.\u003c\/p\u003e\n    \n    \u003ch2\u003eReal-World Performance from Seasoned Anglers\u003c\/h2\u003e\n    \u003cp\u003eCaptains running tournament circuits swear by wide-beam CHIRP for its ability to paint vivid pictures of suspended fish in the upper water column—targets often overlooked by conventional transducers. In deep blue water, the low CHIRP locks onto structure like never before, while the broadband high end reveals bait balls with pinpoint accuracy. It's not just about seeing more; it's about interpreting returns faster for smarter decisions on the water. Proven in harsh environments from the Gulf to the Atlantic, this unit delivers consistent results trip after trip.\u003c\/p\u003e\n    \n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n        \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat boats is the B275LH-W transducer best suited for?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt's optimized for sportfishing and commercial boats 25 feet and longer, particularly those with fiberglass or wood hulls. The fairing block accommodates deadrise up to 20 degrees.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow does the wide beam differ from standard CHIRP transducers?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eThe constant 25-degree beam width across 150-250 kHz provides twice the coverage of narrow-beam models, showing crisper, larger targets in the upper water column and shallows.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eDoes it measure water temperature?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, it includes a fast-response temperature sensor that integrates with compatible displays for real-time data.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat connector does it use?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt features two black 9-pin plugs for easy hookup to 9-pin sonar units, supporting both analog and digital protocols.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eCan I install it myself?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eAbsolutely—it's user-friendly with a 33-foot cable and included fairing. Follow hull alignment guidelines for best performance.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat's the power rating and depth capability?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eRated at 1 kW, it excels in depths over 1,000 feet with low CHIRP, offering reliable bottom tracking even in challenging conditions.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eIs a fairing block included?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, the fairing block is provided to optimize beam angle on angled hulls.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What boats is the B275LH-W transducer best suited for?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It's optimized for sportfishing and commercial boats 25 feet and longer, particularly those with fiberglass or wood hulls. The fairing block accommodates deadrise up to 20 degrees.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does the wide beam differ from standard CHIRP transducers?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The constant 25-degree beam width across 150-250 kHz provides twice the coverage of narrow-beam models, showing crisper, larger targets in the upper water column and shallows.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it measure water temperature?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it includes a fast-response temperature sensor that integrates with compatible displays for real-time data.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What connector does it use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It features two black 9-pin plugs for easy hookup to 9-pin sonar units, supporting both analog and digital protocols.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I install it myself?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely—it's user-friendly with a 33-foot cable and included fairing. Follow hull alignment guidelines for best performance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What's the power rating and depth capability?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Rated at 1 kW, it excels in depths over 1,000 feet with low CHIRP, offering reliable bottom tracking even in challenging conditions.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is a fairing block included?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the fairing block is provided to optimize beam angle on angled hulls.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cp\u003eThe B275LH-W is a bronze, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels 25 Feet and up. This dual-channel transducer combines Low CHIRP frequencies to accurately track the bottom in deep water, with High CHIRP at a constant 25 Degree beam width for the best resolution and coverage in the upper water column and in shallower depths.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013771001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e42-65 kHz Low Frequency\/150-250 kHz High Frequency Dual Channel CHIRP Transducer (Wide Angle)\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e25 Degree Beam Angle\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013771001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eThru-Hull CHIRP Transducer, Ideal For Sport Fishing And Commercial Vessels 25 Feet And Up\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDual-Channel Transducer Combines Low CHIRP Frequencies To Accurately Track The Bottom In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013771001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC B275LH-W Wide Beam CHIRP, 1 kW, 9 Pin Connector\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eGet more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers. \u003cbr\u003e\u003cbr\u003eA unique property of the high frequency transducers is that the beambwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. We've got you covered.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth \u0026amp; Temperature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e42-65 kHz Low Frequency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e150-250 kHz High Frequency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBronze\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 kW\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e9 Pin Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFairing Block Included\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWide 25° Beam\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThese transducers provide a high frequency range of 150-250 khz and a constant 25 beam width, truly achieving the best broadband. In addition to improving performance...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65039\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13771-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161821\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538538573917,"sku":"CWR-65039","price":2703.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-b275lh-w-1.jpg?v=1673106135"},{"product_id":"76173-navico-xsonic-ss75m-200-tilted-element-th","title":"Navico XSONIC SS75M 20\u0026deg; Tilted Element TH Transducer - 600W - Stainless Steel","description":"\u003cdiv class=\"product-description\"\u003e\n\n  \u003cp\u003eUpgrade your boat's sonar capabilities with the XSONIC SS75M, a rugged stainless steel thru-hull transducer designed for anglers chasing fish in waters from shallow bays to deeper offshore spots. This 20-degree tilted element model delivers crisp Medium CHIRP imaging at 80-130 kHz, striking the perfect balance between deep-water bottom tracking and sharp target separation for spotting schools of baitfish or that trophy catch lurking below. Built tough for sportfishing boats up to 25 feet, it mounts seamlessly through the hull, providing reliable depth readings and water temperature data to help you navigate safely and fish smarter.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Anglers Trust the SS75M for Superior Sonar Performance\u003c\/h2\u003e\n  \u003cp\u003eCrafted from durable stainless steel, this transducer withstands harsh marine environments while its low-profile design—just 5mm protruding outside the hull—cuts drag for better fuel efficiency and smoother rides. The built-in 20-degree tilt compensates for hull deadrises between 16 and 24 degrees, ensuring optimal beam angle for accurate echo returns without guesswork during installation. Whether you're trolling for bass in freshwater lakes or hunting snapper in coastal depths, the Medium CHIRP range excels at revealing structure, thermoclines, and individual fish with remarkable clarity, often 5-10 times more detail than traditional fixed-frequency sonar.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Features That Elevate Your Fishing Game\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMedium CHIRP Excellence:\u003c\/strong\u003e 80-130 kHz frequency sweeps deliver exceptional resolution in shallows and solid bottom lock in depths up to hundreds of feet.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTilted Element Design:\u003c\/strong\u003e Pre-angled ceramic for deadrise matching, maximizing signal strength and minimizing air bubbles or distortion.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIntegrated Sensors:\u003c\/strong\u003e Precise depth measurement plus analog\/digital temperature sensing to track water conditions and locate bait balls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Stainless steel housing resists corrosion, ideal for saltwater exposure on commercial or recreational vessels.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e 33-foot cable gives flexibility for clean routing to your display unit.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e Rated at 600 watts for strong performance without overwhelming smaller systems.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 2em;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequency\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMedium CHIRP (80-130 kHz)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Rating\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e600 Watts\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBeam Width (-3 dB)\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e24° to 16°\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMounting Style\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eThru-Hull with 20° Tilt\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eTemperature Sensor\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eYes\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e33 Feet (10 Meters)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eConnector\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e9-Pin\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eHull Deadrise Compatibility\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e16° to 24°\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eInstallation Tips for Peak Performance\u003c\/h2\u003e\n  \u003cp\u003eInstalling a thru-hull transducer like the SS75M requires care to avoid common pitfalls. Select a flat hull section forward of the propellers, away from strakes or thru-hulls that could interfere with the beam. Use a fairing block if needed for deadrise matching, though the 20-degree tilt handles most cases. Fair the leading edge to promote laminar flow, reducing turbulence that muddies readings at speed. Seal thoroughly with marine-grade sealant, and route the cable securely to prevent chafing. Test in calm water post-install to verify clear bottom tracking and temperature accuracy—expect immediate improvements in fish arch definition and depth precision.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Advantages for Everyday Boaters\u003c\/h2\u003e\n  \u003cp\u003eFishermen report the SS75M transforms vague sonar blobs into detailed pictures of wrecks, drop-offs, and suspended game fish. Its Medium CHIRP shines where Low frequencies lose resolution in shallows and High ones fall short on depth. Pair it with modern multifunction displays for XID digital switching, unlocking even finer control. For trailered boats, the stainless build shrugs off beaching and freshwater rinses, maintaining peak output season after season. If you're tired of noisy returns or poor mid-range performance, this tilted thru-hull setup delivers the reliability serious anglers demand.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" style=\"margin-top: 3em;\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat hull types is the SS75M 20-degree tilted transducer best suited for?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's optimized for boats with hull deadrises from 16 to 24 degrees, providing deadrise compensation out of the box for accurate sonar beams without additional fairing adjustments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes the SS75M include a temperature sensor?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it features both analog and digital temperature sensing, helping you monitor water conditions to find productive fishing zones influenced by thermal layers.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does Medium CHIRP on this transducer improve fishing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe 80-130 kHz range offers sharper fish separation in shallows than low frequencies and better depth penetration than high ones, revealing baitfish schools, structures, and bottom details with high resolution.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the cable length and connector type?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt comes with a 33-foot (10-meter) cable and a standard 9-pin connector, making it straightforward to integrate with compatible sonar systems.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the SS75M suitable for saltwater use?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—its stainless steel construction is corrosion-resistant, perfect for commercial fishing or offshore adventures in brackish or full saltwater environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this transducer handle high boat speeds?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe low-profile design minimizes drag and turbulence, maintaining clear sonar images at planing speeds when properly installed with a hydrodynamic fairing.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the power rating and beam width?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRated at 600 watts with a beam width from 24° to 16° at -3 dB, it balances coverage and detail for versatile scanning.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What hull types is the SS75M 20-degree tilted transducer best suited for?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It's optimized for boats with hull deadrises from 16 to 24 degrees, providing deadrise compensation out of the box for accurate sonar beams without additional fairing adjustments.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does the SS75M include a temperature sensor?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it features both analog and digital temperature sensing, helping you monitor water conditions to find productive fishing zones influenced by thermal layers.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How does Medium CHIRP on this transducer improve fishing?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"The 80-130 kHz range offers sharper fish separation in shallows than low frequencies and better depth penetration than high ones, revealing baitfish schools, structures, and bottom details with high resolution.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's the cable length and connector type?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It comes with a 33-foot (10-meter) cable and a standard 9-pin connector, making it straightforward to integrate with compatible sonar systems.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is the SS75M suitable for saltwater use?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely—its stainless steel construction is corrosion-resistant, perfect for commercial fishing or offshore adventures in brackish or full saltwater environments.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can this transducer handle high boat speeds?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"The low-profile design minimizes drag and turbulence, maintaining clear sonar images at planing speeds when properly installed with a hydrodynamic fairing.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's the power rating and beam width?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Rated at 600 watts with a beam width from 24° to 16° at -3 dB, it balances coverage and detail for versatile scanning.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\n\u003c\/div\u003e\u003cp\u003eThe SS75M is a stainless steel, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 25 Feet in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013910001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e80-130 kHz Medium Frequency Single Channel CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\/ 16 To 24 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013910001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eConstructed From Stainless Steel\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Sport Fishing And Commercial Vessels Up To 25 Feet In Length\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSingle-Channel Transducer Offers Medium CHIRP For A Balance Between The Great Depth Penetration Of Low CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSuperior Target Resolution Of High CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013910001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC SS75M 20° Tilted Element TH Transducer - 600W - Stainless Steel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe SS75M is a Stainless Steel, thru-hull, tilted, medium-frequency (80-130kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003cbr\u003e\u003cbr\u003eMedium Frequency: CHIRP range is 80kHz-130kHz for good target detail in shallow water and excellent bottom tracking in deep water.\u003cbr\u003e\u003cbr\u003eThe 20° tilt is ideal for boats with a 16° to 24° hull deadrise. \u003cbr\u003e\u003cbr\u003eIt provides an intermediate frequency of 80-130kHz, and records depth and temperature. The ceramic element is tilted to achieve built-in dead angle compensation, so as...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65062\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13910-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162651\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538544275549,"sku":"CWR-65062","price":932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss75m-200-1.jpg?v=1673106214"},{"product_id":"76274-navico-xsonic-b150m-200-th-9-pin-connector","title":"Navico XSONIC B150M 20\u0026deg; TH 9-Pin Connector w\/10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eDiscover the power of advanced sonar technology with the XSONIC B150M, a bronze thru-hull transducer engineered for anglers chasing fish in shallow to medium depths. Whether you're tackling inshore waters, coastal runs, or freshwater haunts, this medium CHIRP performer delivers crisp target separation and reliable bottom tracking, even at higher boat speeds. Its 20-degree tilt design hugs the hull angle on many vessels up to 8 meters, ensuring optimal beam projection without dead zones.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose Medium CHIRP for Your Next Fishing Adventure\u003c\/h2\u003e\n  \u003cp\u003eMedium CHIRP transducers like the B150M strike the perfect balance, chirping across a broad 95-155 kHz bandwidth. This sweeps 60 kHz of frequencies from a single element, revealing bait schools, structure-hugging gamefish, and suspended targets with exceptional clarity. Unlike fixed-frequency setups, CHIRP's continuous frequency modulation paints wider, more detailed arches—think 26° to 17° beam widths that cover more water under your boat. In murky shallows or up to 2,500 feet* of medium-depth territory, you'll spot fish holding tight to weed edges or thermoclines that single-frequency units might miss.\u003c\/p\u003e\n  \u003cp\u003e*Performance depends on water conditions, target strength, and vessel setup.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt Tough for Real-World Fishing\u003c\/h2\u003e\n  \u003cp\u003eCrafted from durable bronze, this low-profile thru-hull mount thrives on fiberglass or wooden hulls. The 300-watt power rating punches through turbulence, maintaining solid bottom lock while planing. Integrated depth and temperature sensing keeps you dialed into water column changes, helping predict fish behavior on the move. With a 10-meter cable and black 9-pin connector, integration stays straightforward, freeing you to focus on the bite.\u003c\/p\u003e\n\n  \u003ch2\u003eMaximize Performance with Smart Setup Tips\u003c\/h2\u003e\n  \u003cp\u003eFor peak results, position the transducer forward of props and strays, flush-mounted at the hull's flattest spot matching that 20° tilt. This setup minimizes air bubbles and maximizes forward-facing coverage. Pair it with quality electronics, and you'll enjoy interference-free images that turn casual outings into trophy hunts. Freshwater anglers love how it unmasks bass near docks; saltwater pros swear by its reef-edge precision.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eTracks reliably at speed for trolling or drifting.\u003c\/li\u003e\n    \u003cli\u003eExcels in structure-rich environments.\u003c\/li\u003e\n    \u003cli\u003eSimple thru-hull install reduces downtime.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eEveryday Angler Advantages\u003c\/h2\u003e\n  \u003cp\u003eImagine scanning a rocky point at dawn: the B150M's medium CHIRP resolves individual walleye from bait balls, while temp data flags the hot zone. Coastal captains use it to navigate wrecks, spotting snapper stacks amid snags. Its economical design means pro-level sonar without the premium price tag, backed by a solid 2-year warranty for peace of mind on the water.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types work best with the B150M transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for fiberglass and wooden hulls up to 8 meters. The 20-degree tilt matches common deadrise angles for clean water flow and accurate readings.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does medium CHIRP differ from low or high CHIRP?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Medium CHIRP (95-155 kHz) balances depth penetration with sharp target resolution, ideal for shallow to mid-range fishing. Low goes deeper but less detail; high offers max crispness but limited range.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the B150M measure water temperature?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it includes an analog\/digital temp sensor, helping track thermal layers and fish-holding zones in real time.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the cable length and connector type?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It features a 10-meter (33-foot) cable with a black 9-pin connector for reliable, plug-and-play compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this transducer handle high boat speeds?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—its low-profile design and 300-watt power maintain bottom tracking and fish arches while underway, perfect for trolling.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the B150M suitable for both saltwater and freshwater?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, bronze construction stands up to saltwater, while its CHIRP clarity shines in freshwater structures like submerged timber.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What depths can I expect from this medium CHIRP unit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Up to 2,500 feet in ideal conditions, excelling in shallow coastal or inshore scenarios with superior fish ID.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat hull types work best with the B150M transducer?\u003c\/h3\u003e\n      \u003cp\u003eIt's optimized for fiberglass and wooden hulls up to 8 meters. The 20-degree tilt matches common deadrise angles for clean water flow and accurate readings.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow does medium CHIRP differ from low or high CHIRP?\u003c\/h3\u003e\n      \u003cp\u003eMedium CHIRP (95-155 kHz) balances depth penetration with sharp target resolution, ideal for shallow to mid-range fishing. Low goes deeper but less detail; high offers max crispness but limited range.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes the B150M measure water temperature?\u003c\/h3\u003e\n      \u003cp\u003eYes, it includes an analog\/digital temp sensor, helping track thermal layers and fish-holding zones in real time.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's the cable length and connector type?\u003c\/h3\u003e\n      \u003cp\u003eIt features a 10-meter (33-foot) cable with a black 9-pin connector for reliable, plug-and-play compatibility.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan this transducer handle high boat speeds?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely—its low-profile design and 300-watt power maintain bottom tracking and fish arches while underway, perfect for trolling.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the B150M suitable for both saltwater and freshwater?\u003c\/h3\u003e\n      \u003cp\u003eYes, bronze construction stands up to saltwater, while its CHIRP clarity shines in freshwater structures like submerged timber.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat depths can I expect from this medium CHIRP unit?\u003c\/h3\u003e\n      \u003cp\u003eUp to 2,500 feet in ideal conditions, excelling in shallow coastal or inshore scenarios with superior fish ID.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eThe B150M is a bronze, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 8 Meter in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013922001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e300 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e95-155 kHz Medium Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013922001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Inshore Or Coastal Fishing In Shallow To Medium Depths\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRPs From 95 To 155 Kilohertz To Provide 60 Kilohertz Of Total Bandwidth From One Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013922001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC B150M 20° TH 9-Pin Connector with 10M Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAs CHIRP continues to redefine recreational fishing, AIRMAR has expanded the\u003cbr\u003elineup of broadband transducers to satisfy the growing demand for this game\u003cbr\u003echanging technology. The B150M economical CHIRP transducers designed for\u003cbr\u003eoffshore fishing and freshwater anglers. Operating at a frequency range of\u003cbr\u003e95-155 kHz, these transducers reveal fish in shallow, murky waters at medium\u003cbr\u003edepths (up to 2,500 feet*) along with ultra-clear target resolution.\u003cbr\u003e\u003cbr\u003e*Depths vary depending on target strength and sea conditions\u003cbr\u003e\u003cbr\u003eA tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS\u003cbr\u003eacross the following bandwidth: M Model - Medium Frequency 95-155 kHz\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth and water temperature sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e300W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBronze Thru Hull\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e20° tilt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for inshore or coastal fishing in shallow to medium depths\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFreshwater anglers will see fish holding close to structures and suspended fish\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTrack bottom at higher boat speeds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMore coverage under your boat delivers wider archesand 26° to 17° beamwidths\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover the medium frequency range-CHIRPS from 95-155kHz to provide 60kHz of total bandwidth from one transducer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHull Type: Fiberglass, wood\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 internal ceramic\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eMug-It, MFG#066315. With the quick-connect silicone strap and sturdy handle, you can easily add a handle to a bottle, glass or pint. Generally suitable for narrow and wide...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65163\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13922-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162774\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538555121757,"sku":"CWR-65163","price":467.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-b150m-200-1.jpg?v=1673106336"},{"product_id":"76276-navico-xsonic-tm275lh-w-tm-chirp-transducer-wide","title":"Navico XSONIC TM275LH-W TM CHIRP Transducer Wide Angle","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"transducer-overview\"\u003e\n    \u003cp\u003eDiscover the power of advanced sonar detection with the TM275LH-W, a robust urethane transom-mounted CHIRP transducer designed for serious anglers and professional operators on vessels starting at 8 meters. This dual-channel powerhouse delivers unmatched clarity by blending low-frequency CHIRP for pinpoint bottom tracking in depths up to 4000 feet with high-frequency CHIRP maintaining a consistent wide-angle beam for superior target separation closer to the surface and in shallower waters.\u003c\/p\u003e\n    \n    \u003cp\u003eWhat sets this transducer apart is its ability to paint a vivid picture of the underwater world, whether you're chasing trophy fish offshore or navigating structure-filled shallows. The integrated high-precision temperature sensor provides real-time sea surface data, helping you make informed decisions on bait selection and fish behavior patterns influenced by water conditions.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-breakdown\"\u003e\n    \u003ch2\u003eSuperior CHIRP Technology for Every Depth\u003c\/h2\u003e\n    \u003cp\u003eCHIRP transducers like the TM275LH-W revolutionize fishfinding by transmitting a continuous sweep of frequencies rather than a single pulse. This results in sharper images, reduced clutter, and better separation of fish from bait schools or thermoclines.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLow CHIRP (42-65 kHz):\u003c\/strong\u003e With a beam width tapering from 25° to 16°, it excels at probing deep waters, locking onto the bottom even in challenging conditions like soft mud or rugged terrain. Perfect for offshore bottom fishing where every detail counts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh CHIRP (150-250 kHz):\u003c\/strong\u003e Locked at a generous 25° beam across the entire range, it offers exceptional resolution for mid-to-upper water column scanning, spotting individual fish targets amid heavy cover or in bays and inlets.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eThe eight internal broadband ceramic elements ensure reliable performance, minimizing signal loss and maximizing energy efficiency. Anglers report seeing fish arches and bait balls with incredible definition that single-frequency units simply can't match.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eEffortless Transom Installation for Lasting Performance\u003c\/h2\u003e\n    \u003cp\u003eInstalling the TM275LH-W is straightforward, thanks to its durable stainless steel bracket that retrofits to popular existing mounts. Suitable for fiberglass, wood, or metal hulls, it positions perfectly at the transom for optimal water flow and minimal drag.\u003c\/p\u003e\n    \n    \u003cp\u003e\u003cstrong\u003ePro Tips for Peak Results:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eEnsure the deadrise angle matches your hull (typically 0-20°) to avoid cavitation.\u003c\/li\u003e\n      \u003cli\u003eRoute the 33-foot cable away from electrical interference sources like engines or radios.\u003c\/li\u003e\n      \u003cli\u003eSecure with marine-grade sealant for a watertight fit, and test at varying speeds to fine-tune the angle for bubble-free operation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eOnce mounted, you'll notice immediate improvements in sonar returns, even at planing speeds up to 30 knots.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-applications\"\u003e\n    \u003ch2\u003eVersatile Performance Across Fishing Scenarios\u003c\/h2\u003e\n    \u003cp\u003eFor sportfishing enthusiasts targeting billfish, tuna, or snapper in deep blue water, the low CHIRP channel reveals wrecks, drop-offs, and ledges with precision. Switch focus to inshore pursuits like redfish or flounder, and the wide high beam uncovers hidden gems in grass beds or oyster bars.\u003c\/p\u003e\n    \n    \u003cp\u003eCommercial operators value its reliability on larger vessels, where consistent bottom lock and fish counting capabilities streamline operations. Pair it with broadband sounder modules for enhanced processing power, and you'll unlock features like motion compensation for cleaner screens in rough seas.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-specifications\"\u003e\n    \u003ch2\u003eTechnical Specs at a Glance\u003c\/h2\u003e\n    \u003ctable class=\"spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eAttribute\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMounting\u003c\/td\u003e\n          \u003ctd\u003eTransom Mount (urethane housing)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eConnector\u003c\/td\u003e\n          \u003ctd\u003e9-Pin\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMax Depth\u003c\/td\u003e\n          \u003ctd\u003e4000 Feet\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBeam Angle\u003c\/td\u003e\n          \u003ctd\u003eLow: 25-16° | High: 25° Constant\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCable Length\u003c\/td\u003e\n          \u003ctd\u003e33 Feet\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSensor\u003c\/td\u003e\n          \u003ctd\u003eHigh-Precision Water Temperature\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Reliability and Care\u003c\/h2\u003e\n    \u003cp\u003eBuilt to withstand harsh marine environments, the TM275LH-W features a tough urethane housing resistant to UV, impact, and biofouling. Regular maintenance keeps it performing like new:\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003eWipe clean after each trip to remove salt and algae.\u003c\/li\u003e\n      \u003cli\u003eInspect the bracket for corrosion and tighten as needed.\u003c\/li\u003e\n      \u003cli\u003eStore in a cool, dry place during off-seasons to preserve ceramics.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eWith proper care, it delivers years of dependable service, giving you confidence on every outing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types is the TM275LH-W compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It works seamlessly on fiberglass, wood, and metal hulls from 8 meters and up, thanks to its versatile transom mount design.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does the wide beam angle benefit fishing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The constant 25° high-frequency beam provides broader coverage and better fish target resolution in the upper water column and shallows, reducing the need to constantly adjust course.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this transducer handle high boat speeds?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it maintains clear sonar readings at speeds up to 30 knots when properly installed and angled to minimize air bubbles.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it include a temperature sensor?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, it features a high-precision sensor for accurate surface water temperature readings, crucial for locating baitfish and predicting fish activity.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the difference between low and high CHIRP channels?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Low CHIRP (42-65 kHz) penetrates deeper for bottom structure (up to 4000 ft), while high CHIRP (150-250 kHz) offers sharp detail for fish ID in shallower depths.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation DIY-friendly?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, with basic tools and following hull-specific guidelines, most boat owners can install it themselves. It even retrofits to common bracket types.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How many ceramic elements does it have?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Eight internal broadband ceramics ensure strong signal strength and wide frequency sweeps for professional-grade performance.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat hull types is the TM275LH-W compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt works seamlessly on fiberglass, wood, and metal hulls from 8 meters and up, thanks to its versatile transom mount design.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow does the wide beam angle benefit fishing?\u003c\/summary\u003e\n        \u003cp\u003eThe constant 25° high-frequency beam provides broader coverage and better fish target resolution in the upper water column and shallows, reducing the need to constantly adjust course.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan this transducer handle high boat speeds?\u003c\/summary\u003e\n        \u003cp\u003eYes, it maintains clear sonar readings at speeds up to 30 knots when properly installed and angled to minimize air bubbles.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it include a temperature sensor?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely, it features a high-precision sensor for accurate surface water temperature readings, crucial for locating baitfish and predicting fish activity.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the difference between low and high CHIRP channels?\u003c\/summary\u003e\n        \u003cp\u003eLow CHIRP (42-65 kHz) penetrates deeper for bottom structure (up to 4000 ft), while high CHIRP (150-250 kHz) offers sharp detail for fish ID in shallower depths.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly?\u003c\/summary\u003e\n        \u003cp\u003eYes, with basic tools and following hull-specific guidelines, most boat owners can install it themselves. It even retrofits to common bracket types.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow many ceramic elements does it have?\u003c\/summary\u003e\n        \u003cp\u003eEight internal broadband ceramics ensure strong signal strength and wide frequency sweeps for professional-grade performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description { font-family: Arial, sans-serif; line-height: 1.6; color: #333; max-width: 800px; margin: 0 auto; }\n  h2 { color: #2c5aa0; border-bottom: 2px solid #eee; padding-bottom: 10px; }\n  h3 { color: #444; }\n  ul, ol { margin-bottom: 1em; padding-left: 20px; }\n  table.spec-table { width: 100%; border-collapse: collapse; margin: 1em 0; }\n  table.spec-table th, table.spec-table td { border: 1px solid #ddd; padding: 12px; text-align: left; }\n  table.spec-table th { background-color: #f4f4f4; }\n  details { margin-bottom: 1em; border: 1px solid #ddd; padding: 10px; border-radius: 5px; }\n  summary { font-weight: bold; cursor: pointer; }\n  @media (max-width: 768px) { .product-description { padding: 0 10px; } table.spec-table { font-size: 14px; } }\n\u003c\/style\u003e\u003cp\u003eThe TM275LH-W is a urethane, transom-mounted CHIRP transducer, ideal for sport fishing and commercial vessels 8 Meter and up. This dual-channel transducer combines Low CHIRP frequencies to accurately track the bottom in deep water, with High CHIRP at a constant 25 Degree beam width for the best resolution and coverage in the upper water column and in shallower depths. The TM275C-LHW CHIRP transom-mount transducer has 8 internal, broadband ceramic elements. The low-frequency can be chirped from 42 to 65 Kilohertz while the high-frequency chirps from 130 to 210 Kilohertz. The beamwidth is a wide 25 Degree across all frequencies. Also high-precision water-temperature sensor for accurate sea-surface temperature readings.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013770001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e4000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e42-65 kHz Low Frequency\/150-250 kHz High Frequency Dual Channel CHIRP Transducer (Wide Angle)\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e25 Degree Beam Angle\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013770001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Sport Fishing And Commercial Vessels 8 Meter And Up\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDual-Channel Transducer Combines Low CHIRP Frequencies To Accurately Track The Bottom In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eWith High CHIRP At A Constant 25 Degree Beam Width For The Best Resolution And Coverage In The Upper Water Column And In Shallower Depths\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013770001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eXSONIC TM275LH-W TM CHIRP Transducer Wide Angle\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe TM275LH-W is a urethane, transom-mounted CHIRP transducer, ideal for sportfishing and commercial vessels 8 m (25 ft) and up. This dual-channel transducer combines Low CHIRP frequencies to accurately track the bottom in deep water, with High CHIRP at a constant 25x beam width for the best resolution and coverage in the upper water column and in shallower depths.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e42-65 kHz Low CHIRP with 25-16x beam width\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e150-250 kHz High CHIRP with wide 25° beam for excellent fish targets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 1200 m (4000 ft) range with Low CHIRP\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 internal broadband ceramics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransom-mounted with urethane housing and stainless steel mounting bracket (can retrofit to existing TM258 \u0026amp; TM260 brackets)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for fiberglass, wood and metal hulls\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for sportfishing and commercial vessels 8 m (25 ft) and up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended for use with the BSM-3 broadband sounder module\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003ePower supply: unspecified, installation: tail plate, TM275LH-W is a urethane, tail plate mounted CHIRP transducer, very suitable for sport fishing and commercial boats of 8 m (25 feet) and above. This ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65165\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13770-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161814\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538555187293,"sku":"CWR-65165","price":2287.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-tm275lh-w-1.jpg?v=1673106340"},{"product_id":"76279-navico-xsonic-ss60-120-tilted-element-thru","title":"Navico XSONIC SS60 12\u0026deg; Tilted Element Thru Hull - 9-Pin Connector - 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eUpgrade your boat's sonar capabilities with a transducer built for precision and durability in demanding marine environments. This stainless steel thru-hull model features a 12-degree tilted element, perfectly matched to hulls with 8 to 15 degrees of deadrise. It delivers reliable depth readings and water temperature data, helping you navigate safely and locate fish with confidence—whether you're trolling offshore or exploring coastal waters.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted for mid-performance setups, it strikes the ideal balance between power and sensitivity, ensuring clear echoes from shallow structures to deeper bottoms. The low-profile design hugs the hull closely, reducing drag and turbulence for smoother rides at speed.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy Boaters Trust This Transducer\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOptimized for Real-World Hulls:\u003c\/strong\u003e The built-in 12° tilt compensates for deadrise angles, aligning the ceramic element perpendicular to the water for sharper, more accurate bottom tracking—eliminating the guesswork common with flat-mount options.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-Frequency Versatility:\u003c\/strong\u003e Switch seamlessly between 50 kHz for wide-area coverage in deep water (up to 45° beam) and 200 kHz for crisp detail in shallows (12° beam), ideal for both navigation and structure scanning.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Marine Construction:\u003c\/strong\u003e Marine-grade stainless steel housing withstands corrosion, impacts, and constant submersion, backed by a sleek profile that protrudes just 5mm below the hull to minimize resistance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Sensors:\u003c\/strong\u003e Combines high-accuracy depth with analog\/digital temperature sensing, giving you vital data for baitfish tracking, thermocline detection, and safe passage.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e Features a 9-pin black connector and 10-meter cable, making it a straightforward swap for compatible chartplotters—perfect for weekend warriors and serious anglers alike.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-insights\"\u003e\n    \u003ch2\u003eMaximize Your On-Water Performance\u003c\/h2\u003e\n    \u003cp\u003eIn practical use, this transducer shines during early morning fog or low-light conditions when visual navigation falls short. The 600-watt RMS power punches through thermoclines and suspended sediment, revealing wrecks, drop-offs, and schools that lesser units miss. Anglers report consistent lock-on to bottom structure at speeds over 20 knots, thanks to the tilted design that fights aeration.\u003c\/p\u003e\n    \n    \u003cp\u003eFor fishing applications, the dual frequencies let you dial in: use 200 kHz to pinpoint jigging spots near reefs or 50 kHz to scout broad ledges in 300+ feet. Pair it with modern multifunction displays, and you'll get layered sonar views that separate bait from gamefish effortlessly.\u003c\/p\u003e\n    \n    \u003ch3\u003eInstallation Tips for Peak Results\u003c\/h3\u003e\n    \u003col\u003e\n      \u003cli\u003eChoose a forward-facing spot 1\/4 hull length from the bow, away from strakes or thru-hulls to avoid interference.\u003c\/li\u003e\n      \u003cli\u003eDrill at a slight forward angle matching your deadrise for flush seating—seal with marine sealant for watertight integrity.\u003c\/li\u003e\n      \u003cli\u003eRoute the cable along existing wire runs, securing with ties to prevent chafing from engine vibration.\u003c\/li\u003e\n      \u003cli\u003eCalibrate post-install via your display's sonar menu for spot-on depth offsets and temperature accuracy.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eRegular maintenance is simple: Wipe the face seasonally with a soft cloth and mild soap to prevent marine growth buildup, ensuring year-after-year clarity.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"technical-specs\"\u003e\n    \u003ch2\u003eDetailed Specifications\u003c\/h2\u003e\n    \u003ctable class=\"specs-table\" style=\"border-collapse: collapse; width: 100%; margin: 1em 0;\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background-color: #f4f4f4;\"\u003eSpecification\u003c\/th\u003e\n          \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background-color: #f4f4f4;\"\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequency\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e50\/200 kHz\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Rating\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e600 watts\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBeam Width (-3 dB)\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e45° (50 kHz) \/ 12° (200 kHz)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eSensors\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eDepth \u0026amp; Temperature\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eHousing Material\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eStainless Steel\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMounting Style\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eThru-Hull (12° Tilt)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e10 meters\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eConnector\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e9-pin Black\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What hull deadrise angles is this 12° tilted transducer suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's designed for boats with 8° to 15° deadrise, ensuring the element sits perpendicular to the waterline for optimal performance.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it measure water temperature?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it includes an integrated temperature sensor that provides accurate readings for fishing and navigation insights.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between 50 kHz and 200 kHz on this unit?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"50 kHz offers wider coverage for deep water bottom tracking, while 200 kHz provides finer resolution for shallow-water details and fish arches.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How much does it protrude below the hull?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Only 5mm, making it one of the lowest-profile thru-hull options to reduce drag and improve high-speed performance.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation DIY-friendly for experienced boaters?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—requires a thru-hull hole, sealant, and basic wiring, but always verify compatibility with your display first.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can it handle rough offshore conditions?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, the stainless steel build resists corrosion and impacts, performing reliably in choppy seas and saltwater exposure.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What's the cable length and connector type?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"10 meters of cable with a 9-pin black connector, suitable for most console-to-transom runs.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat hull deadrise angles is this 12° tilted transducer suited for?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for boats with 8° to 15° deadrise, ensuring the element sits perpendicular to the waterline for optimal performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it measure water temperature?\u003c\/summary\u003e\n        \u003cp\u003eYes, it includes an integrated temperature sensor that provides accurate readings for fishing and navigation insights.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the difference between 50 kHz and 200 kHz on this unit?\u003c\/summary\u003e\n        \u003cp\u003e50 kHz offers wider coverage for deep water bottom tracking, while 200 kHz provides finer resolution for shallow-water details and fish arches.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow much does it protrude below the hull?\u003c\/summary\u003e\n        \u003cp\u003eOnly 5mm, making it one of the lowest-profile thru-hull options to reduce drag and improve high-speed performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly for experienced boaters?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—requires a thru-hull hole, sealant, and basic wiring, but always verify compatibility with your display first.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan it handle rough offshore conditions?\u003c\/summary\u003e\n        \u003cp\u003eYes, the stainless steel build resists corrosion and impacts, performing reliably in choppy seas and saltwater exposure.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the cable length and connector type?\u003c\/summary\u003e\n        \u003cp\u003e10 meters of cable with a 9-pin black connector, suitable for most console-to-transom runs.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .specs-table { font-family: Arial, sans-serif; border-radius: 8px; overflow: hidden; box-shadow: 0 2px 10px rgba(0,0,0,0.1); }\n  .specs-table th, .specs-table td { vertical-align: top; }\n  @media (max-width: 768px) { .specs-table { font-size: 14px; } .specs-table th, .specs-table td { padding: 8px; } }\n  .faq-list details { margin-bottom: 1em; border: 1px solid #ddd; border-radius: 4px; padding: 1em; }\n  .faq-list summary { cursor: pointer; font-weight: bold; }\n  .faq-list details[open] summary { color: #007bff; }\n\u003c\/style\u003e\u003cb\u003eXSONIC SS60 Stainless Steel Tilted Element Thru hull Transducer - 12°\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e12° titled version is designed for 8° - 15° deadrise angles\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDepth\/Temp\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e50\/200 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e600w RMS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMid-performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel Housing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e9 Pin Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSimrad SS60 stainless steel 600 W through the hull 50200 Khz depth temperature (12 tilt) model 000 13785 001 to calculate the depth of the water in order to avoid slipping on the ground, at the same time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65168\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13785-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161968\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538555416669,"sku":"65168","price":478.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss60-120-1.jpg?v=1673106344"},{"product_id":"76824-navicoxsonic-ss175m-stainless-steel-thru-hull-tilted-medium","title":"NavicoXSONIC SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 20\u0026deg; Element - 9-Pin","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eDiscover Superior Underwater Detection with the SS175M Medium CHIRP Transducer\u003c\/h2\u003e\n    \u003cp\u003eEngineered for anglers and boaters who demand crystal-clear sonar images without compromise, this stainless steel thru-hull transducer delivers exceptional performance across a variety of hull types. Its tilted 20-degree element design ensures optimal beam projection even on vessels with deadrise angles, minimizing the need for fairing blocks and simplifying installation. Whether you're chasing trophy fish in coastal waters or navigating commercial routes, the medium-frequency CHIRP capability strikes the perfect balance—punching through to impressive depths while resolving fine details like individual baitfish schools.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted from durable stainless steel, it withstands harsh marine environments, including saltwater exposure on steel or aluminum hulls. Paired with a fast-response temperature sensor, it provides real-time water column data to help you locate temperature breaks where game fish congregate. The 9-pin black connector integrates seamlessly with popular sounders, unlocking a 50 kHz bandwidth that sweeps from 85 to 135 kHz, capturing everything from 88 kHz downriggers to versatile mid-range frequencies.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Advantages for Serious Fishermen\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBalanced CHIRP Performance:\u003c\/strong\u003e Medium frequencies offer deeper penetration than high-CHIRP options (ideal for 100-300 foot depths) and sharper target separation than low frequencies, revealing bait balls, wrecks, and bottom structure with stunning clarity.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Beam Width:\u003c\/strong\u003e Dynamically adjusts from 24 degrees at lower frequencies to 16 degrees at the upper end, providing wide coverage for searching and narrow focus for pinpointing marks.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Low-Profile Design:\u003c\/strong\u003e Usable shaft length of about 71mm allows flush mounting on boats up to 36 feet, reducing drag and vulnerability to underwater obstacles.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAll-Weather Reliability:\u003c\/strong\u003e Internal broadband ceramic assembly resists fouling, while the stainless housing fights corrosion for years of trouble-free service.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Sensors:\u003c\/strong\u003e Combines precise depth readings with analog\/digital temperature output, essential for jigging, trolling, or live-lining in stratified waters.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Choose Medium CHIRP Over Traditional Fixed Frequencies?\u003c\/h2\u003e\n    \u003cp\u003eUnlike single-frequency transducers that lock you into one speed or depth range, CHIRP technology continuously varies the pulse to paint a hyper-detailed picture of the underwater world. Medium CHIRP shines in scenarios where high frequencies fall short on depth but low ones blur targets—think mid-depth reefs, suspended pelagic species like tuna or mahi-mahi, or structure fishing in 200-foot contours. Users report fish arches so lifelike they rival forward-facing sonar, with minimal noise from thermoclines or bait clouds.\u003c\/p\u003e\n    \n    \u003cp\u003eFor sportfishing boats, this means fewer missed hookups from poor returns. Commercial operators appreciate the consistent bottom tracking at speed, even in choppy conditions up to 20 knots.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eInstallation Insights for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eMounting is straightforward on fiberglass, wood, steel, or aluminum hulls—position it forward of props and struts for clean water flow. The 20-degree tilt compensates for hull deadrise between 8-25 degrees, aligning the beam perpendicular to the keel for maximum forward reach. With a 33-foot cable, routing to the helm is hassle-free. Pro tip: Pair with high-output amplifiers for full 1kW potential, and always bed in polyurethane sealant for a watertight seal.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\n      \"Switched to this from a basic 50kHz unit—night and day difference in marking stripers on wrecks. Depth and temp data alone paid for it on the first offshore trip.\"\n    \u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Match for Your Electronics Suite\u003c\/h2\u003e\n    \u003cp\u003eThe black 9-pin XID connector supports plug-and-play with a range of chartplotters and fishfinders, enabling automatic frequency tuning and software updates. It's a go-to upgrade for vessels chasing everything from inshore snapper to bluewater billfish, where reliable sonar is non-negotiable.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull materials is the SS175M compatible with?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt works excellently on fiberglass, wood, steel, and aluminum hulls, thanks to its robust stainless steel construction and thru-hull design.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does the 20-degree tilt benefit installation?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eThe built-in tilt aligns the ceramic element perpendicular to the water flow on sloped hulls (8-25 degrees deadrise), eliminating the need for custom wedges and ensuring optimal beam angle without distortion.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat fishing depths does medium CHIRP handle best?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eExcels from shallow reefs to 300+ feet, balancing resolution for baitfish ID and penetration for bottom fishing or wreck hunting.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it include a temperature sensor?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it features a fast-response depth and water-temperature sensor, outputting data for contour trolling or finding thermal edges.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the cable length and connector type?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003e33 feet (10 meters) of cable with a reliable black 9-pin connector for straightforward integration.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this suitable for high-speed operation?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—its low-profile housing and streamlined shape maintain accurate readings up to planing speeds, perfect for tournament rigs.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does CHIRP improve over conventional sonar?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eCHIRP sends a swept pulse across the bandwidth, producing longer, more energetic signals for vivid fish arches, superior clutter rejection, and structure detail that fixed frequencies can't match.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe SS175M is a stainless steel, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 8 Meter in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013779001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e85-135 kHz Medium Frequency Single Channel CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013779001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003e20 Degree Tilt, Low CHIRP Through Hull Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eConstructed From Stainless Steel\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e85 Kilohertz To 135 Kilohertz Medium CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013779001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eXSONIC SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 20° Element - 9-Pin\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack 9-Pin Connector\u003c\/li\u003e\n\u003cli\u003eCable Length - 10M (33.0')\u003c\/li\u003e\n\u003cli\u003eSS175M - 1-Internal Broadband Ceramic Assembly\u003c\/li\u003e\n\u003cli\u003eDepth \u0026amp; fast-response water-temperature sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel transducer housing\u003c\/li\u003e\n\u003cli\u003eHull Type: Steel or aluminum\u003c\/li\u003e\n\u003cli\u003eBoat Size: Up to 11M (36’)\u003c\/li\u003e\n\u003cli\u003eUseable shaft length  71mm (2.80”)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMedium-Frequency (M)\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMedium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth\u003c\/li\u003e\n\u003cli\u003e50 kHz of total bandwidth from one transducer\u003c\/li\u003e\n\u003cli\u003eCovers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth\u003c\/li\u003e\n\u003cli\u003eMedium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e\"Rely on Simrad's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 10,000' (3,000 meter) with 5 to 10 time's greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. This transducer is designed for smaller boats up to 36' (11 meters). M Model has a medium frequency of 85-135 kHz and is a 20 tilt version. 50 kHz of total bandwidth from one transducer, covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth. Depth \u0026amp; fast-response water-temperature sensor. The SS175M Transducer has a stainless steel housing and is designed for boats with steel or aluminum hulls. The transducer has a power rating of 1 kW at 1% duty cycle 2.5\\\" (65 mm) PZT with an active area of 5.1 sq. in. (33 sq.cm.). The transducers radiating surface is a urethane design with a Q equaling 2. The cable is a C335 type and measures 33' (10 meters) in length. The transducer comes with mounting hardware and an owner's manual. Notes: (1) dB re 1 Pa per volt at 3' (1 meter) (2) dB re 1 volt per Pa (3) sum of transmitting voltage response and receiving voltage response (4) CW Power ratings is for 68 F (20 C) seawater temperature.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65713\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13779-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161906\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538652967005,"sku":"CWR-65713","price":1463.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navicoxsonic-ss175m-stainless-steel-1.jpg?v=1673107562"},{"product_id":"76825-navico-xsonic-ss175m-stainless-steel-thru-hull-tilted","title":"Navico XSONIC SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 12\u0026deg; Element - 9-Pin","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"transducer-overview\"\u003e\n    \u003ch2\u003eDiscover Superior Underwater Clarity with the SS175M Medium CHIRP Transducer\u003c\/h2\u003e\n    \u003cp\u003eUpgrade your boat's sonar capabilities with a rugged thru-hull transducer designed for serious anglers and commercial operators chasing fish in varied depths. This stainless steel powerhouse delivers crisp Medium CHIRP imaging that punches through water columns better than high-frequency options while sharpening targets sharper than traditional low-frequency setups. Perfect for vessels navigating coastal waters or inland lakes, it captures everything from bait schools to structure with remarkable detail.\u003c\/p\u003e\n    \u003cp\u003eBuilt to withstand harsh marine environments, the tilted element ensures optimal beam projection regardless of hull deadrise, minimizing dead zones and maximizing coverage directly beneath your boat. Whether you're marking wrecks, tracking thermoclines, or spotting trophy fish, this transducer transforms your fishfinder display into a window into the deep.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Reliable Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable Stainless Steel Housing:\u003c\/strong\u003e Corrosion-resistant construction thrives on steel, aluminum, fiberglass, or wood hulls, handling constant exposure to saltwater and freshwater.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMedium CHIRP Technology (85-135 kHz):\u003c\/strong\u003e Sweeps across 50 kHz of bandwidth, hitting key fishing sweet spots like 88 kHz and 107 kHz for versatile target separation and depth penetration up to several hundred feet.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e12-Degree Tilted Element:\u003c\/strong\u003e Precision-aligned for hulls with moderate deadrise, projecting a dynamic beamwidth from 24° at lower frequencies to 16° at higher ones for focused scanning.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Depth and Temperature Sensing:\u003c\/strong\u003e Real-time water temp data alongside high-resolution depth readings, essential for locating temperature breaks where fish congregate.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended 33-Foot Cable:\u003c\/strong\u003e Ample length for clean routing from the hull to your display unit, reducing signal noise.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e9-Pin Black Connector:\u003c\/strong\u003e Seamless plug-and-play with compatible marine electronics.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"technical-benefits\"\u003e\n    \u003ch2\u003eWhy Medium CHIRP Excels in Real-World Fishing\u003c\/h2\u003e\n    \u003cp\u003eUnlike narrow high-CHIRP bands that excel in shallow crispness or broad low-CHIRP for extreme depths, Medium CHIRP strikes the perfect balance. Anglers report tighter fish arches, clearer bottom contours, and fewer false readings around bait balls. The 1 kW power handling supports high-output sounders, revealing subtle ledges and drop-offs that hold walleye, bass, or snapper.\u003c\/p\u003e\n    \u003cp\u003eFor boats up to 36 feet, it mounts flush for hydrodynamic efficiency—no drag, no turbulence. The low-profile design (usable shaft around 2.8 inches) fits most transom setups without major hull modifications.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eEffortless Installation and Long-Term Maintenance\u003c\/h2\u003e\n    \u003cp\u003eInstalling a thru-hull transducer like this one rewards careful planning. Select a spot forward of the prop and keel, away from strakes or thru-hulls that cause interference. Drill precisely, bed with marine sealant, and secure the nut hand-tight plus a quarter turn. Pair it with a fairing block for high-speed accuracy if your hull demands it.\u003c\/p\u003e\n    \u003cp\u003eOnce in place, winterize by removing if possible, or flush the system. Regular hull cleaning prevents marine growth from attenuating signals, keeping readings sharp season after season. Pro tip: Calibrate temp and depth offsets in your unit's menu for pinpoint accuracy.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"fishing-applications\"\u003e\n    \u003ch2\u003eIdeal Scenarios for Peak Fishing Success\u003c\/h2\u003e\n    \u003cp\u003eCoastal salmon chasers love its resolution on downriggers. Great Lakes walleye pros rely on it for mid-depth jigging. Offshore bottom bouncers appreciate the steel housing punching through green water. Even tournament bass boats benefit from temp-sensing for post-frontal patterns. It's not just gear—it's your edge on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What hull types is the SS175M compatible with?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It works seamlessly on fiberglass, wood, steel, and aluminum hulls up to 36 feet, thanks to its robust stainless steel housing.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does this transducer include temperature sensing?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it features a fast-response water-temperature sensor alongside depth capabilities for comprehensive water column data.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is the beamwidth range for Medium CHIRP?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"The beamwidth varies from 24 degrees at 85 kHz to 16 degrees at 135 kHz, providing excellent target definition across depths.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is the 12-degree tilt suitable for all boats?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's optimized for hulls with 8-15 degree deadrise; for steeper angles, consider adjustable models or a fairing.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the cable, and what's the connector type?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It comes with a 33-foot cable and a reliable 9-pin black connector for straightforward integration.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this handle high-output fishfinders?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely, rated for 1 kW systems, it pairs well with powerful Navico-brand units for maximum sonar punch.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What's the advantage of Medium CHIRP over Low or High?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It offers deeper penetration than High CHIRP with sharper resolution than Low CHIRP, ideal for mid-range fishing from 50-400 feet.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat hull types is the SS175M compatible with?\u003c\/h3\u003e\n        \u003cp\u003eIt works seamlessly on fiberglass, wood, steel, and aluminum hulls up to 36 feet, thanks to its robust stainless steel housing.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDoes this transducer include temperature sensing?\u003c\/h3\u003e\n        \u003cp\u003eYes, it features a fast-response water-temperature sensor alongside depth capabilities for comprehensive water column data.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat is the beamwidth range for Medium CHIRP?\u003c\/h3\u003e\n        \u003cp\u003eThe beamwidth varies from 24 degrees at 85 kHz to 16 degrees at 135 kHz, providing excellent target definition across depths.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs the 12-degree tilt suitable for all boats?\u003c\/h3\u003e\n        \u003cp\u003eIt's optimized for hulls with 8-15 degree deadrise; for steeper angles, consider adjustable models or a fairing.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow long is the cable, and what's the connector type?\u003c\/h3\u003e\n        \u003cp\u003eIt comes with a 33-foot cable and a reliable 9-pin black connector for straightforward integration.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan this handle high-output fishfinders?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely, rated for 1 kW systems, it pairs well with powerful Navico-brand units for maximum sonar punch.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat's the advantage of Medium CHIRP over Low or High?\u003c\/h3\u003e\n        \u003cp\u003eIt offers deeper penetration than High CHIRP with sharper resolution than Low CHIRP, ideal for mid-range fishing from 50-400 feet.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe SS175M is a stainless steel, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 8 Meter in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013778001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e85-135 kHz Medium Frequency Single Channel CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013778001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003e12 Degree, Low CHIRP Through Hull Flush Mount Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eConstructed From Stainless Steel\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e85 Kilohertz To 135 Kilohertz Medium CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013778001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eXSONIC SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 12° Element - 9-Pin\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack 9-Pin Connector\u003c\/li\u003e\n\u003cli\u003eCable Length - 10M (33.0')\u003c\/li\u003e\n\u003cli\u003eSS175M - 1-Internal Broadband Ceramic Assembly\u003c\/li\u003e\n\u003cli\u003eDepth \u0026amp; fast-response water-temperature sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel transducer housing\u003c\/li\u003e\n\u003cli\u003eHull Type: Steel or aluminum\u003c\/li\u003e\n\u003cli\u003eBoat Size: Up to 11M (36’)\u003c\/li\u003e\n\u003cli\u003eUseable shaft length  71mm (2.80”)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMedium-Frequency (M)\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMedium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth\u003c\/li\u003e\n\u003cli\u003e50 kHz of total bandwidth from one transducer\u003c\/li\u003e\n\u003cli\u003eCovers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth\u003c\/li\u003e\n\u003cli\u003eMedium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e\"Rely on Simrad's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 10,000' (3,000 meter) with 5 to 10 time's greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. This transducer is designed for smaller boats up to 36' (11 meters). M Model has a medium frequency of 85-135 kHz and is a 12 tilt version. 50 kHz of total bandwidth from one transducer, covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth. Depth \u0026amp; fast-response water-temperature sensor. The SS175M Transducer has a stainless steel housing and is designed for boats with steel or aluminum hulls. The transducer has a power rating of 1 kW at 1% duty cycle 2.5\\\" (65 mm) PZT with an active area of 5.1 sq. in. (33 sq.cm.). The transducers radiating surface is a urethane design with a Q equaling 2. The cable is a C335 type and measures 33' (10 meters) in length. The transducer comes with mounting hardware and an owner's manual. Notes: (1) dB re 1 Pa per volt at 3' (1 meter) (2) dB re 1 volt per Pa (3) sum of transmitting voltage response and receiving voltage response (4) CW Power ratings is for 68 F (20 C) seawater temperature.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65714\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13778-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161890\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538654638173,"sku":"CWR-65714","price":1463.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss175m-stainless-1.jpg?v=1673107566"},{"product_id":"76846-navico-xsonic-ss75m-stainless-steel-thru-hull-medium","title":"Navico XSONIC SS75M Stainless Steel Thru-Hull Medium CHIRP Transducer - 12\u0026deg; Element - 9-Pin","description":"\u003csection\u003e\n    \u003ch2\u003eUnlock Crystal-Clear Underwater Insights with the SS75M Transducer\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding through coastal waters, spotting schools of baitfish dancing around a hidden reef, or tracking structure down to 1000 feet with pinpoint accuracy. That's the edge the Navico XSONIC SS75M delivers. This stainless steel thru-hull transducer isn't just hardware—it's your key to safer navigation, hotter bites, and deeper adventures. Built for medium CHIRP performance, it sweeps 80-130 kHz to reveal fine details in shallows while locking onto the bottom in deeper haunts.\u003c\/p\u003e\n    \n    \u003cp\u003eWhat sets it apart? The 12-degree tilted ceramic element automatically compensates for your hull's deadrise (perfect for 8-15 degree angles), ensuring echo returns hit straight-on for reliable readings. No guesswork, no adjustments needed. Anglers swear by its ability to separate fish from thermoclines or wreck debris, turning vague blips into actionable intel.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eWhy Medium CHIRP Changes the Game for Serious Boaters\u003c\/h2\u003e\n    \u003cp\u003eTraditional fixed-frequency sonar? It's like listening to a fuzzy radio. CHIRP technology pulses across a wide band—here, 80-130 kHz—for 5-10x sharper images. In skinny water near shorelines, you pick out individual stripers tailing crabs. Drop deeper offshore, and it maintains solid bottom lock past 1000 feet, ideal for tuna runs or wreck diving.\u003c\/p\u003e\n    \n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSuperior Target ID:\u003c\/strong\u003e Distinguish game fish from bait clouds or rocks effortlessly.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eDepth Precision:\u003c\/strong\u003e Avoid groundings with real-time water column data.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTemp Tracking:\u003c\/strong\u003e Built-in sensor flags bite windows as water layers shift.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eBoaters report cleaner arches on fast trolls and fewer false positives around bait balls. It's not hype—it's physics delivering pro-level sonar on recreational rigs.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eSleek Design Meets Rugged Performance\u003c\/h2\u003e\n    \u003cp\u003eThe SS75M hugs your hull with a low-profile stainless steel housing—just 5mm proud of the gelcoat. Drag? Minimal. It's forged for saltwater punishment, shrugging off barnacles and corrosion that plague lesser units.\u003c\/p\u003e\n    \n    \u003cp\u003eInstallation is straightforward: Drill, bed in sealant, torque to spec, and route the 33-foot cable. The 9-pin black connector snaps into compatible multifunction displays, no adapters required. That tilted element means no shimming for most planing hulls, saving hours at the yard.\u003c\/p\u003e\n    \n    \u003cfigure\u003e\n        \u003cfigcaption\u003eKey perks for everyday use:\u003c\/figcaption\u003e\n        \u003cul\u003e\n            \u003cli\u003e600-watt power punches through murk.\u003c\/li\u003e\n            \u003cli\u003eBeam widens from 16° (deep) to 24° (shallow) for adaptive coverage.\u003c\/li\u003e\n            \u003cli\u003eSingle-element simplicity keeps it reliable and affordable.\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/figure\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n    \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 1em;\"\u003e\n        \u003cthead\u003e\n            \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n                \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n                \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n            \u003c\/tr\u003e\n        \u003c\/thead\u003e\n        \u003ctbody\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequency\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMedium CHIRP (80-130 kHz)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Rating\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e600 Watts\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBeamwidth (-3 dB)\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e24° to 16°\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eElements\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e1\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e33 Feet (10 Meters)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMounting\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eStainless Steel Thru-Hull (12° Tilt)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eSensors\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eDepth \u0026amp; Temperature\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eSeamless Integration for Your Setup\u003c\/h2\u003e\n    \u003cp\u003ePlug-and-play with popular chartplotters featuring 9-pin ports. Pairs beautifully with units craving medium CHIRP for balanced shallow-to-deep performance. Think center-console bay boats chasing reds or sportfishers probing ledges. Skip speed sensors if paddles aren't your thing—this focuses on sonar purity.\u003c\/p\u003e\n    \n    \u003cp\u003ePro tip: Mount forward of props for clean water flow, maximizing that wide beam's potential. Users love how it elevates basic sonar into fish-finding wizardry without breaking the bank.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n            {\n                \"@type\": \"Question\",\n                \"name\": \"What frequency does the SS75M transducer cover?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"It operates on medium CHIRP from 80-130 kHz, balancing sharp detail in shallows with strong bottom tracking in depths.\"\n                }\n            },\n            {\n                \"@type\": \"Question\",\n                \"name\": \"Is the SS75M suitable for my boat's hull?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"Yes, the 12-degree tilt compensates for 8-15 degree deadrise hulls, common on planing boats, for optimal echo returns.\"\n                }\n            },\n            {\n                \"@type\": \"Question\",\n                \"name\": \"Does it include a temperature sensor?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"Absolutely—it measures water temperature alongside depth, helping track fish behavior tied to thermal shifts.\"\n                }\n            },\n            {\n                \"@type\": \"Question\",\n                \"name\": \"How long is the cable on this transducer?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"The cable runs 33 feet (10 meters), giving flexibility for routing to your helm without extensions.\"\n                }\n            },\n            {\n                \"@type\": \"Question\",\n                \"name\": \"What's the beamwidth range?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"It adjusts from 24 degrees in shallower water to 16 degrees deeper, providing adaptive coverage for varied fishing scenarios.\"\n                }\n            },\n            {\n                \"@type\": \"Question\",\n                \"name\": \"Is installation DIY-friendly?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"Very much so—thru-hull mount with low-profile design minimizes drag, and the plug-and-play connector simplifies wiring.\"\n                }\n            },\n            {\n                \"@type\": \"Question\",\n                \"name\": \"Why choose medium CHIRP over high or low frequency?\",\n                \"acceptedAnswer\": {\n                    \"@type\": \"Answer\",\n                    \"text\": \"Medium strikes the sweet spot: finer resolution than low freq for structure\/fish ID, yet penetrates deeper than high freq without losing bottom contact.\"\n                }\n            }\n        ]\n    }\n    \u003c\/script\u003e\n    \n    \u003cdiv\u003e\n        \u003ch3\u003eWhat frequency does the SS75M transducer cover?\u003c\/h3\u003e\n        \u003cp\u003eIt operates on medium CHIRP from 80-130 kHz, balancing sharp detail in shallows with strong bottom tracking in depths.\u003c\/p\u003e\n        \n        \u003ch3\u003eIs the SS75M suitable for my boat's hull?\u003c\/h3\u003e\n        \u003cp\u003eYes, the 12-degree tilt compensates for 8-15 degree deadrise hulls, common on planing boats, for optimal echo returns.\u003c\/p\u003e\n        \n        \u003ch3\u003eDoes it include a temperature sensor?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely—it measures water temperature alongside depth, helping track fish behavior tied to thermal shifts.\u003c\/p\u003e\n        \n        \u003ch3\u003eHow long is the cable on this transducer?\u003c\/h3\u003e\n        \u003cp\u003eThe cable runs 33 feet (10 meters), giving flexibility for routing to your helm without extensions.\u003c\/p\u003e\n        \n        \u003ch3\u003eWhat's the beamwidth range?\u003c\/h3\u003e\n        \u003cp\u003eIt adjusts from 24 degrees in shallower water to 16 degrees deeper, providing adaptive coverage for varied fishing scenarios.\u003c\/p\u003e\n        \n        \u003ch3\u003eIs installation DIY-friendly?\u003c\/h3\u003e\n        \u003cp\u003eVery much so—thru-hull mount with low-profile design minimizes drag, and the plug-and-play connector simplifies wiring.\u003c\/p\u003e\n        \n        \u003ch3\u003eWhy choose medium CHIRP over high or low frequency?\u003c\/h3\u003e\n        \u003cp\u003eMedium strikes the sweet spot: finer resolution than low freq for structure\/fish ID, yet penetrates deeper than high freq without losing bottom contact.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eReal Boaters' Edge: When It Shines\u003c\/h2\u003e\n    \u003cp\u003eFrom inshore flounder drifts to offshore canyon hunts, the SS75M turns 'where are they?' into 'hookset!' Coastal captains praise its clarity around pilings; bluewater pros dig the deep-water reliability. Upgrade your electronics, elevate your outings—it's that simple.\u003c\/p\u003e\n\u003c\/section\u003e\u003cp\u003eThe SS75M is a bronze, thru-hull, tilted, medium-frequency (80 to 130 Kilohertz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013909001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e80-130 kHz Medium Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Degree Tilt\/ 8 To 15 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013909001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Transducers Enable Bottom Detection With 5 To 10 Times Greater Detail And Resolution So Precise It’s Possible To Distinguish Between Individual Baitfish, Game Fish, And Underwater Structures\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCalculates How Deep The Water Is, So That You Can Avoid Running Aground, Whilst Also Incorporating A Temperature Sensor For Accurate Water Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Range Is 80 Kilohertz To 130 Kilohertz For Good Target Detail In Shallow Water And Excellent Bottom Tracking In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eProvides Extremely Accurate Data\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e12 Degree Tilt Is Ideal For Boats With A 8 Degree To 15 Degree Hull Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLow Profile Housing Minimizes Drag With Just 5 Millimeter Extending Outside Of The Hull\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003ePlug And Play Connection: Easily Connect To Simrad NSSevo3 Or Lowrance HDS Gen3\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013909001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eXSONIC SS75M Stainless Steel Thru-Hull Medium CHIRP Transducer - 12° Element - 9-Pin\u003c\/b\u003e\u003c\/p\u003e\u003cp style='\"font-style:' normal sans-serif font-variant-ligatures:=\"\" font-variant-caps:=\"\" font-weight:=\"\" font-size:=\"\" font-family:=\"\"\u003eThe SS75M is a bronze, thru-hull, tilted, medium-frequency (80-130kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003c\/p\u003e\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e600 W Thru Hull Medium CHIRP (80-130kHz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth\/Temp (12° tilt)\u003c\/li\u003e\n\u003cli\u003eBlack 9-pin connector\u003c\/li\u003e\n\u003cli\u003eCable length 10M (33.0')\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eCHIRP\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDepth\/Temperature\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCalculates how deep the water is, so that you can avoid running aground, while also incorporating a temperature sensor for accurate water temperature readings.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMedium Frequency\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eCHIRP range is 80kHz-130kHz for good target detail in shallow water and excellent bottom tracking in deep water.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHighly Accurate\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eProvides extremely accurate data.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e12° Tilt\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe 12° tilt is ideal for boats with a 8° to 15° hull deadrise.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eLow Profile\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe low profile housing minimizes drag with just 5mm extending outside of the hull.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePlug \u0026amp; Play Connection\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEasily connect to NSSevo3\u003cbr\u003e\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003e\"Simrad ss75m 12 degree tilt model: 000-13909-001 chirp transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise its possible to distinguish between individual baitfish, game fish, and underwater structures. Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings. Chirp range is 80khz-130khz for good target detail in shallow water and excellent bottom tracking in deep water. Provides extremely accurate data. The 12 tilt is ideal for boats with a 8 to 15 hull deadrise. The low profile housing minimizes drag with just 5mm extending outside of the hull. Easily connect to nssevo3the ss75m is a bronze, thru-hull, tilted, medium-frequency 80-130khz, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings. Specifications frequencymedium chirp 80-130khzpower rating600 wattsspeed sensornotemperature sensoryesmounting stylestainless steel thru-hullelements1beamwidth -3db24 to 16cable length10 meter.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65735\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13909-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162644\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538658046045,"sku":"CWR-65735","price":932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss75m-stainless-1.jpg?v=1673107682"},{"product_id":"77042-navico-xsonic-b150m-thru-hull-transducer-9-pin","title":"Navico XSONIC B150M Thru-Hull Transducer - 9-Pin 10M Cable - 0\u0026deg;","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eDiscover the power of precise underwater detection with the XSONIC B150M thru-hull transducer, a bronze powerhouse designed for anglers chasing fish in coastal waters and beyond. This medium-frequency CHIRP model strikes the perfect balance, delivering exceptional target separation in shallow to moderate depths while maintaining solid performance up to impressive ranges. Whether you're trolling for sport fish or running commercial ops on vessels around 8 meters, its low-profile design hugs the hull seamlessly, minimizing drag and maximizing sonar clarity even at speed.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose Medium CHIRP for Your Fishing Adventures\u003c\/h2\u003e\n  \u003cp\u003eUnlike traditional fixed-frequency transducers, the B150M sweeps across a broad 95-155 kHz bandwidth, unlocking 60 kHz of versatile coverage from a single unit. This means sharper images of bait schools, structure, and individual targets in murky inshore bays or clearer offshore readings. Freshwater enthusiasts love how it reveals fish hugging weed lines or suspended mid-water, while saltwater pros appreciate the beam widths that taper from 26° at shallower ranges to 17° deeper down—giving you wider coverage right under the boat.\u003c\/p\u003e\n  \n  \u003cp\u003eBuilt tough with bronze construction, it handles fiberglass or wooden hulls effortlessly. The integrated depth and temperature sensor keeps you informed on water column changes, helping you adjust tactics on the fly. At 300 watts, it punches through thermoclines without overwhelming smaller sounder units, ensuring reliable bottom tracking as your boat planes up.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Performance Tailored to Real-World Boating\u003c\/h2\u003e\n  \u003cp\u003ePicture this: You're navigating busy coastal shallows, and suddenly crystal-clear arches pop on screen, marking that trophy lurking near a wreck. The B150M excels here, offering resolution that rivals higher-end setups without the complexity. Its 0° tilt suits dead-flat hull bottoms, projecting sound straight down for undistorted views. The 9-pin black connector and generous 33-foot cable make routing straightforward, even in tight console spaces.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBeam Versatility:\u003c\/strong\u003e Expansive coverage for locating fish fast\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpeed Tolerance:\u003c\/strong\u003e Tracks reliably up to higher hull speeds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemp Sensing:\u003c\/strong\u003e Spot current shifts and fish behavior cues\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHull Compatibility:\u003c\/strong\u003e Optimized for common recreational builds\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eUnlocking the Full Potential: Tips from Seasoned Installers\u003c\/h2\u003e\n  \u003cp\u003eGetting the most from your B150M starts with proper placement—ahead of props and strakes, flush-mounted for minimal turbulence. Pair it with compatible Navico sounders, and you'll notice immediate gains in target definition over older single-frequency gear. Regular hull cleaning prevents marine growth from dulling performance, and its rugged internals shrug off the rigors of repeated launches.\u003c\/p\u003e\n  \n  \u003cp\u003eFor coastal runs, it shines spotting pelagics near reefs; in lakes, it dissects structure like a pro. Depths to 2,500 feet vary with conditions and targets, but expect consistent results in typical sportfishing scenarios. Anglers upgrading from basic transducers often report fewer false readings and quicker hookups.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat hull types work best with the B150M transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's ideal for fiberglass and wooden hulls with a flat deadrise. The 0° tilt ensures optimal sound projection without dead zones.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does medium CHIRP differ from low or high frequency options?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMedium CHIRP (95-155 kHz) blends low-frequency depth punch with high-frequency crispness, perfect for inshore to mid-depth fishing where detail matters most.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this transducer handle faster boat speeds?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, its design supports bottom tracking at higher speeds, making it great for trolling or searching large areas efficiently.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it include temperature sensing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, the built-in sensor provides real-time water temperature data, crucial for locating species that follow thermal breaks.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the maximum depth capability?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eUp to 2,500 feet, though actual performance depends on water conditions, target strength, and your sounder setup.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eFor handy boaters, yes—thru-hull mounting is straightforward with basic tools, but professional help ensures perfect alignment for peak performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types work best with the B150M transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's ideal for fiberglass and wooden hulls with a flat deadrise. The 0° tilt ensures optimal sound projection without dead zones.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does medium CHIRP differ from low or high frequency options?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Medium CHIRP (95-155 kHz) blends low-frequency depth punch with high-frequency crispness, perfect for inshore to mid-depth fishing where detail matters most.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this transducer handle faster boat speeds?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its design supports bottom tracking at higher speeds, making it great for trolling or searching large areas efficiently.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it include temperature sensing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, the built-in sensor provides real-time water temperature data, crucial for locating species that follow thermal breaks.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum depth capability?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Up to 2,500 feet, though actual performance depends on water conditions, target strength, and your sounder setup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation DIY-friendly?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"For handy boaters, yes—thru-hull mounting is straightforward with basic tools, but professional help ensures perfect alignment for peak performance.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eThe B150M is a bronze, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 8 Meter in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013920001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e2500 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e300 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e95-155 kHz Medium Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013920001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Inshore Or Coastal Fishing In Shallow To Medium Depths\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRPs From 95 To 155 Kilohertz To Provide 60 Kilohertz Of Total Bandwidth From One Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013920001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eXSONIC B150M Thru-Hull Transducer - 9-Pin 10M Cable - 0°\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAs CHIRP continues to redefine recreational fishing, AIRMAR has expanded the\n lineup of broadband transducers to satisfy the growing demand for this game changing technology. The B150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution. \u003c\/p\u003e\u003cp\u003e\n*Depths vary depending on target strength and sea conditions \u003c\/p\u003e\u003cp\u003e\nA tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS across the following bandwidth: M Model - Medium Frequency 95-155 kHz  \u003c\/p\u003e\u003cp\u003e\u003cb\u003e\nFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDepth and water temperature sensor\n\u003c\/li\u003e\n\u003cli\u003e300W\n\u003c\/li\u003e\n\u003cli\u003eBronze Thru Hull\n\u003c\/li\u003e\n\u003cli\u003e0° tilt\n\u003c\/li\u003e\n\u003cli\u003eIdeal for inshore or coastal fishing in shallow to medium depths\n\u003c\/li\u003e\n\u003cli\u003eFreshwater anglers will see fish holding close to structures and\n suspended fish \u003c\/li\u003e\n\u003cli\u003eTrack bottom at higher boat speeds\n\u003c\/li\u003e\n\u003cli\u003eMore coverage under your boat delivers wider archesand 26° to\n 17° beamwidths \u003c\/li\u003e\n\u003cli\u003eCover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer\n\u003c\/li\u003e\n\u003cli\u003eHull Type: Fiberglass, wood\n\u003c\/li\u003e\n\u003cli\u003e1 internal ceramic\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e\"H2Zero, MFG# 038800, Provides 10ft. submersible protection for phones and cameras. Perfect for snorkeling, rafting, or at the beach. Sized to fit most Apple (including iPhone 6 and iPhone 6 Plus) and Samsung phones. Double zip-lock closure.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65931\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13920-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162750\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538760937565,"sku":"CWR-65931","price":467.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-b150m-thru-1.jpg?v=1673108194"},{"product_id":"77044-navico-xsonic-tm150m-transom-mount-transducer","title":"Navico XSONIC TM150M Transom Mount Transducer - 9-Pin 10M Cable","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Crystal-Clear Underwater Views with CHIRP Technology\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding across a murky lake or navigating coastal waters, spotting fish hugging structures or suspended mid-water with pinpoint accuracy. That's the edge the TM150M transom mount transducer delivers. Unlike traditional fixed-frequency sonar that can miss subtle targets, its broadband CHIRP sweeps from 95-155 kHz, painting detailed images even in challenging conditions. Anglers chasing bass in weedy shallows or trolling for walleye swear by this setup for its ability to separate fish from bottom clutter at speeds that keep you on plane.\u003c\/p\u003e\n    \u003cp\u003eBuilt tough with a plastic housing and urethane acoustic window, it handles fiberglass, wood, or metal hulls with deadrise up to 20 degrees. The included 10-meter 9-pin cable reaches most helm stations without splicing hassles, making it a plug-and-play favorite for boats under 25 feet.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStandout Features for Serious Anglers\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMedium CHIRP Bandwidth:\u003c\/strong\u003e 60 kHz span (95-155 kHz) for superior target separation and coverage—wider 26° to 17° beamwidths mean more fish under your boat.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower and Depth:\u003c\/strong\u003e 300W output tracks bottom reliably up to medium depths, revealing structure and bait schools with ultra-clear resolution.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSensors Included:\u003c\/strong\u003e Built-in depth and temperature readings help you dial in lure depth or monitor thermoclines on the fly.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Mounting:\u003c\/strong\u003e Transom bracket secures firmly; custom housing option shields against trailering dings.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOne Ceramic Design:\u003c\/strong\u003e Streamlined internals for reliable performance without the bulk.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhether you're punching through freshwater weeds or scanning inshore reefs, this transducer excels where single-frequency units falter, delivering arches that pop and echoes that echo truth.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect for Freshwater and Inshore Adventures\u003c\/h2\u003e\n    \u003cp\u003eFor bass boats pounding reservoirs or center consoles hitting flats, the TM150M shines in shallows to mid-depths. Its sensitivity picks out crappie stacked on brush piles or redfish tailing in grass—details that boost hookups. Offshore day trips? It holds its own up to 2,500 feet on strong targets, though conditions like current or bait balls influence max range.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Pair it with medium-power sounders for optimal pulse tuning. At higher speeds, the narrower beam keeps bottom track locked, so you never lose the plot while running and gunning.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation on Your Boat\u003c\/h2\u003e\n    \u003cp\u003eMounting is straightforward for weekend warriors or pros. Start by picking a transom spot 1\/3 from the hull bottom, away from strakes or prop wash. Drill pilot holes, bed the bracket with marine sealant, and route the cable through existing gunwale conduits. Adjust angle for 10-15° down tilt—test in water to fine-tune. Common pitfalls? Avoiding air bubbles under the transducer by keeping it submerged fully at rest. In under an hour, you're scanning.\u003c\/p\u003e\n    \u003cblockquote\u003e\"Switched from a basic ducer—night and day on separating suspended walleye from bait. Install was a breeze on my 20' tiller.\"\u003c\/blockquote\u003e\n    \u003cp\u003e—Satisfied lake angler\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaximize Performance and Longevity\u003c\/h2\u003e\n    \u003cp\u003eTo keep readings sharp season after season, rinse with fresh water post-salt dips and inspect the face for marine growth. Winter storage? Dry thoroughly and store cable-loose. Upgrading your setup? This pairs seamlessly with compatible chartplotters, unlocking split-screen views of structure scan and traditional sonar.\u003c\/p\u003e\n    \u003cp\u003eFishermen report fewer false reads in dirty water, crediting the CHIRP's energy focus. It's not just gear—it's confidence on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What frequency range does the TM150M transducer cover?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It CHIRPs across 95-155 kHz, providing 60 kHz of bandwidth ideal for medium-depth fishing with excellent target resolution.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the TM150M suitable for saltwater use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's great for inshore and coastal saltwater fishing in shallow to medium depths, thanks to its durable plastic housing and urethane window.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types work with this transom mount transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It mounts securely on fiberglass, wood, or metal hulls with deadrise from 2° to 20°.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it measure water temperature?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—built-in temperature sensor delivers real-time readings to track fish-holding zones.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the cable length and connector type?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It comes with a 10-meter cable and 9-pin black connector for straightforward compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it track bottom at higher boat speeds?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, the design maintains solid bottom lock even as you push speed, with beamwidths adapting from 26° to 17°.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this transducer good for small boats?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Perfect for boats up to 25 feet, offering wide coverage without overwhelming smaller setups.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003eXSONIC TM150M Transom Mount Transducer - 9-Pin 10M Cable\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAs CHIRP continues to re-define recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The TM150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution. \n\u003c\/p\u003e\u003cp\u003e\n*Depths vary depending on target strength and sea conditions \u003c\/p\u003e\u003cp\u003e\nThis is a Transom Mount model in the CHIRP product line. The TM150M is an excellent choice for freshwater fishers, and CHIRPS across the following bandwidth: Medium Frequency 95-155 kHz. Designed for smaller boats up to 25'. \u003c\/p\u003e\u003cp\u003e\u003cb\u003e\nFeatures: \u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDepth and water temperature sensor\n\u003c\/li\u003e\n\u003cli\u003e300W\n\u003c\/li\u003e\n\u003cli\u003ePlastic Housing\n\u003c\/li\u003e\n\u003cli\u003eIdeal for inshore or coastal fishing in shallow to medium depths\n\u003c\/li\u003e\n\u003cli\u003eFreshwater anglers will see fish holding close to structures and suspended fish\n\u003c\/li\u003e\n\u003cli\u003eTrack bottom at higher boat speeds\n\u003c\/li\u003e\n\u003cli\u003eMore coverage under your boat delivers wider archesand 26° to 17° beamwidths\n\u003c\/li\u003e\n\u003cli\u003eCover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer\n\u003c\/li\u003e\n\u003cli\u003eHull Type: Fiberglass, wood or metal\n\u003c\/li\u003e\n\u003cli\u003e1 internal ceramic\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eNavico Xsonic Tm150M beam-mounted transducer brand new product #000-13944-001 Navico Xsonic Tm150M beam-mounted transducer is very suitable for...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-65933\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13944-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024163344\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538761035869,"sku":"65933","price":412.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-tm150m-transom-1.jpg?v=1673108199"},{"product_id":"77207-navico-xsonic-ss175h-w-12-stainless-steel-thru-hull-transducer","title":"Navico XSONIC SS175H-W\/12 Stainless Steel Thru-Hull Transducer - 12\u0026deg; - 9-Pin","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"transducer-overview\"\u003e\n    \u003cp\u003eUpgrade your boat's sonar capabilities with the robust stainless steel thru-hull transducer designed for precision fishing in shallower waters. This model stands out with its high CHIRP technology, delivering crystal-clear images of fish targets and bottom structure on vessels up to 8 meters long. The wide beam angle ensures broader coverage, making it easier to spot schools of fish or structure without constantly repositioning your boat.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted from durable stainless steel, it withstands harsh marine environments, resisting corrosion and impacts better than plastic alternatives. The 12-degree tilt compensates for common hull deadrise angles, optimizing sound wave projection straight downward for accurate depth readings up to 310 meters.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Serious Anglers\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh CHIRP Performance:\u003c\/strong\u003e Operates across 130-210 kHz with a generous 25-degree wide beam, excelling at marking individual fish and baitfish even in murky shallows.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDeep Water Reach:\u003c\/strong\u003e Probes down to 1000 feet, powered by a 1000-watt rating for reliable performance in varied conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBuilt-in Broadband Ceramic:\u003c\/strong\u003e Single internal element provides seamless CHIRP scanning without multiple frequencies.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eThru-Hull Design:\u003c\/strong\u003e Low-profile mount with stainless steel housing suits fiberglass and wood hulls, minimizing drag.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Cable:\u003c\/strong\u003e 33 feet of cable offers flexible routing to your display unit.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e9-Pin Connector:\u003c\/strong\u003e Plug-and-play compatibility with popular marine electronics.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-section\"\u003e\n    \u003ch2\u003eWhy This Transducer Elevates Your Fishing Game\u003c\/h2\u003e\n    \u003cp\u003eIn the world of sonar transducers, the combination of high-frequency CHIRP and a wide beam sets this apart for inshore and coastal anglers. Unlike narrower beams that miss fish on the edges, the 25-degree spread paints a fuller picture of the underwater scene, helping you cover more ground quickly. Fishermen targeting snapper, grouper, or reef species in 10-50 meter depths report sharper target separation, reducing guesswork on hooksets.\u003c\/p\u003e\n    \n    \u003cp\u003eThe tilted element is a game-changer for boats with 8-20 degree deadrise hulls—sound pulses fire perpendicular to the water surface, cutting out distortion from hull angle. Stainless steel construction means it laughs off barnacle buildup and UV exposure, staying reliable season after season on saltwater sportfishers.\u003c\/p\u003e\n    \n    \u003cp\u003ePair it with multifunction displays for Medium\/High CHIRP modes, and you'll notice fewer false readings from thermoclines or debris, thanks to the broadband ceramic's clean signal processing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eEffortless Installation Tips\u003c\/h2\u003e\n    \u003cp\u003eInstalling a thru-hull transducer like this one requires planning for peak performance. Select a spot forward of the propellers, amidships on the hull, where water flow stays laminar. Fair the housing to match your hull's contour using marine sealant for a watertight seal.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003eDrill a 50mm hole, ensuring 30cm clearance below the waterline.\u003c\/li\u003e\n      \u003cli\u003eAdjust the 12-degree tilt to align the transducer face parallel to the keel line.\u003c\/li\u003e\n      \u003cli\u003eRoute the 10-meter cable away from engines and bilge pumps to avoid interference.\u003c\/li\u003e\n      \u003cli\u003eTest in shallow water post-install to verify beam coverage—no cavitation bubbles.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eFor wood hulls, bed it in epoxy thickened with filler for rock-solid hold. Always disconnect power before wiring to prevent shorts.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Maintenance for Reliability\u003c\/h2\u003e\n    \u003cp\u003eKeep it performing like new with simple upkeep. After every trip, rinse with fresh water to flush salt crystals. Inspect the face for marine growth—gently scrape with a plastic tool, avoiding abrasives that could scratch the ceramic.\u003c\/p\u003e\n    \n    \u003cp\u003eWinterize by drying the cable entry and applying dielectric grease to pins. If fouling persists in warm waters, consider an anti-fouling paint compatible with stainless. Regular checks ensure consistent 1000-watt output and sharp CHIRP returns.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull types is this transducer best for?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's optimized for fiberglass and wood hulls on boats up to 8 meters. The stainless steel housing and 12-degree tilt handle moderate deadrise angles common on sportfishing center consoles.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does the wide beam help in shallow water fishing?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eThe 25-degree wide beam covers a larger swath underwater, ideal for spotting fish schools or structure in depths under 50 meters, where narrow beams might overlook targets.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the maximum depth capability?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt reliably reads up to 310 meters (1000 feet) with its 1000-watt power and high CHIRP frequencies, perfect for coastal drops or wrecks.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it include a temperature sensor?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it features an analog\/digital temp sensor, providing water temperature data alongside depth and fish arches on compatible displays.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs the 12-degree tilt adjustable?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eThe tilt is fixed at 12 degrees to match typical hull angles during installation. It orients the beam straight down once mounted correctly.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat cable length comes with it?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eA 10-meter (33-foot) cable allows easy connection to helm-mounted units without extensions in most setups.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it handle saltwater use?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—stainless steel construction provides superior corrosion resistance for prolonged exposure in marine environments.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for boats up to 8 Meter in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013781001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e130-210 kHz High Frequency Single Channel CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013781001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003e130 To 210 Kilohertz High CHIRP With Wide 25 Degree Beam For Excellent Fish Targets\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eUp To 310 Meter Range With High CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e1 Internal Broadband Ceramic\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eThru-Hull With Stainless Steel Housing\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSuitable For Fiberglass And Wood Hulls\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Sport Fishing Vessels Up To 8 Meter\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013781001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSS175H-W\/12 Stainless Steel Thru-Hull Transducer - 12° - 9-Pin\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\nFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n130-210 kHz High CHIRP with wide 25° beam for excellent fish targets \u003c\/li\u003e\n\u003cli\u003eUp to 310M (1000') range with High CHIRP\n\u003c\/li\u003e\n\u003cli\u003e1 internal broadband ceramic\n\u003c\/li\u003e\n\u003cli\u003eThru-hull with stainless steel housing\n\u003c\/li\u003e\n\u003cli\u003eSuitable for fiberglass and wood hulls\n\u003c\/li\u003e\n\u003cli\u003eIdeal for sportfishing and commercial vessels up to 8M (25')\n\u003c\/li\u003e\n\u003cli\u003eRecommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe xSonic SS175H-W high-frequency CHIRP through-hull transducer can transmit in the 130-210 kHz bandwidth range, providing bottom detection capabilities as low as 1,000 ft.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-66096\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13781-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161920\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538822180957,"sku":"CWR-66096","price":1754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss175h-w-1_119288ba-c149-431b-98bd-4bc3b8f2eeef.jpg?v=1673108804"},{"product_id":"77208-navico-ss175h-w-0-stainless-steel-thru-hull-transducer","title":"Navico SS175H-W\/0 Stainless Steel Thru-Hull Transducer - 0\u0026deg; - 9-Pin","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eDiscover Superior Shallow-Water Performance with the SS175H-W\/0 Transducer\u003c\/h2\u003e\n    \u003cp\u003eUpgrade your vessel's sonar capabilities with this robust stainless steel thru-hull transducer designed for anglers and commercial operators chasing fish in shallower waters. Engineered for boats up to 25 feet, it delivers exceptional target separation and coverage thanks to its high CHIRP frequency range of 130-210 kHz paired with a generous 25-degree wide beam angle. Whether you're tracking schools of panfish or scouting structure in bays and rivers, this 0-degree tilt model ensures crystal-clear images without the distortion of steeper angles.\u003c\/p\u003e\n    \u003cp\u003eCrafted from durable 316 stainless steel, it withstands harsh marine environments while maintaining a low-profile installation that minimizes drag. The included 33-foot cable and black 9-pin connector make it a seamless fit for modern multifunction displays, providing not just depth readings up to 1,000 feet but also precise water temperature data from its integrated sensor.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Set It Apart\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh CHIRP Excellence:\u003c\/strong\u003e 130-210 kHz single-channel operation excels in resolutions for baitfish, gamefish, and bottom structure in depths under 300 feet.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWide Beam Coverage:\u003c\/strong\u003e 25-degree beam sweeps a broader area, perfect for spotting fish spread out over reefs or drop-offs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eThru-Hull Durability:\u003c\/strong\u003e Low-profile stepped housing mounts flush on fiberglass or wooden hulls, ideal for planing hulls up to 8 meters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSmart Connectivity:\u003c\/strong\u003e 9-pin XID-compatible connector supports both analog and digital interfaces, plus temperature sensing for versatile readings.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePowerhouse Output:\u003c\/strong\u003e Rated at 1 kW, it punches through thermoclines and delivers reliable performance even in choppy conditions.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Choose This Transducer for Everyday Adventures\u003c\/h2\u003e\n    \u003cp\u003eFishermen know that shallow-water sonar demands more than depth— it needs razor-sharp definition to separate fish from clutter. This model's wide high-frequency CHIRP shines where low-frequency options falter, revealing wrecks, weed beds, and suspended targets with stunning clarity. Commercial users appreciate its rugged build for daily ops, while weekend warriors love the easy install that doesn't require dry-docking every season.\u003c\/p\u003e\n    \u003cp\u003eCompared to plastic housings, stainless steel resists fouling and corrosion, extending service life in saltwater. The 0-degree tilt keeps the beam perpendicular to the bottom for accurate readings at speed, outperforming tilt-adjusted models on dead-flat hulls. Pair it with your chartplotter, and you'll gain an edge in competitive tournaments or family fishing trips.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStep-by-Step Installation Insights\u003c\/h2\u003e\n    \u003cp\u003eMounting a thru-hull transducer like this one transforms your boat's fishfinding game. Start by selecting a spot forward of the propeller, 1\/3 of the hull length from the bow, away from strakes or thru-hulls that cause turbulence. Drill a 3-inch hole, bed the housing in sealant, and secure with the nut—aim for the ceramic face parallel to the waterline at rest.\u003c\/p\u003e\n    \u003cp\u003eRoute the 33-foot cable through the hull gland, avoiding engine heat and sharp edges. Connect to your display's rear port; most units auto-detect CHIRP settings. Fairing blocks aren't needed for this 0-degree model, simplifying the job. Test in calm water: adjust if arches appear irregular, ensuring peak performance underway.\u003c\/p\u003e\n    \u003cblockquote\u003e\n      Pro Tip: Clean the hull bottom annually and check for marine growth on the face— a quick wipe keeps signals strong.\n    \u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eCompatibility and Real-World Pairings\u003c\/h2\u003e\n    \u003cp\u003eThis 9-pin powerhouse integrates smoothly with popular marine electronics ecosystems. It's a natural match for displays featuring CHIRP-ready sonar modules, supporting high-frequency wide scans alongside medium or low bands for full-spectrum coverage. Users report flawless operation across various setups, from compact GPS\/fishfinders to networked helm stations.\u003c\/p\u003e\n    \u003cp\u003eFor best results, calibrate beam angles in your unit's sonar menu and enable temperature overlays for spotting bait balls influenced by water columns. It's versatile enough for both freshwater lakes and inshore saltwater pursuits.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eLong-Term Maintenance for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eTo maximize lifespan, inspect the cable for frays and the housing for pitting after every haul-out. Avoid antifouling paints on the active face, as they dampen signals—instead, rely on the stainless polish. Winter storage? Dry it thoroughly to prevent electrolysis. With proper care, it delivers years of reliable service, saving you from frequent replacements.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat hull types work best with this 0-degree thru-hull transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's optimized for fiberglass and wooden displacement or semi-displacement hulls up to 25 feet. Avoid on high-speed planing hulls without deadrise compensation, as the beam may distort at speed.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it include temperature sensing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, the built-in sensor provides accurate digital water temperature data, displayed directly on compatible units for tracking thermal edges where fish congregate.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the maximum depth capability?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt reaches up to 1,000 feet in ideal conditions with high CHIRP, though performance shines brightest in shallower waters under 300 feet for superior resolution.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this transducer suitable for aluminum boats?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eStainless steel models like this can work on aluminum with isolation kits to prevent galvanic corrosion, but check your display's compatibility first.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does the wide beam angle benefit fishing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe 25-degree wide beam covers more water horizontally, helping you locate fish faster in open areas or when trolling, without sacrificing the crisp targets of high frequency.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use it with older fishfinders?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt requires CHIRP-enabled units via the 9-pin connector. Older analog-only systems may need adapters, but full features shine on modern digital networks.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe SS175M is a stainless steel, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 8 Meter in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013780001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e130-210 kHz High Frequency Single Channel CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013780001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eConstructed From Stainless Steel\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e85 Kilohertz To 135 Kilohertz Medium CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013780001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSS175H-W\/0 Stainless Steel Thru-Hull Transducer - 0° - 9-Pin\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\nFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n130-210 kHz High CHIRP with wide 25° beam for excellent fish targets \u003c\/li\u003e\n\u003cli\u003eUp to 310M (1000') range with High CHIRP\n\u003c\/li\u003e\n\u003cli\u003e1 internal broadband ceramic\n\u003c\/li\u003e\n\u003cli\u003eThru-hull with stainless steel housing\n\u003c\/li\u003e\n\u003cli\u003eSuitable for fiberglass and wood hulls\n\u003c\/li\u003e\n\u003cli\u003eIdeal for sportfishing and commercial vessels up to 8M (25')\n\u003c\/li\u003e\n\u003cli\u003eRecommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSS175H-W is a stainless steel shell CHIRP sensor, which is very suitable for sport fishing and commercial boats with a size of up to 8M (25'). This single-channel transducer provides high...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-66097\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13780-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161913\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538825261149,"sku":"66097","price":1754.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-ss175h-w-0-1.jpg?v=1673108813"},{"product_id":"77570-navico-xsonic-ss60-stainless-steel-200-tilt","title":"Navico XSONIC SS60 Stainless Steel 20\u0026deg; Tilt Thru-Hull Depth\/Temp Transducer - 9-Pin - 10M Cable","description":"\u003cdiv class=\"product-description\"\u003e\n    \u003cp\u003eDiscover the precision and reliability that serious boaters demand with this robust stainless steel thru-hull transducer designed for optimal performance on vessels with moderate deadrise hulls. Engineered with a 20-degree tilt, it compensates seamlessly for hull angles between 16 and 24 degrees, ensuring crystal-clear sonar returns without the need for additional adjustments. Whether you're navigating shallow bays or probing depths up to 3,000 feet, this dual-frequency powerhouse at 50 kHz and 200 kHz delivers exceptional bottom tracking and target separation, making it a go-to choice for anglers chasing trophy fish or captains monitoring underwater terrain.\u003c\/p\u003e\n\n    \u003ch2\u003eKey Advantages for Everyday Boating Adventures\u003c\/h2\u003e\n    \u003cp\u003eBuilt tough from marine-grade stainless steel, this low-profile transducer protrudes just 5mm beyond the hull, slashing drag and maintaining your boat's sleek lines for better fuel efficiency and speed. The integrated temperature sensor provides real-time water temp data, crucial for locating baitfish schools or understanding thermoclines that influence fish behavior. Its 600-watt power handling punches through murky water and delivers sharp images even in challenging conditions, outperforming many competitors in shallow-water detail at 200 kHz while locking onto structure at 50 kHz.\u003c\/p\u003e\n\n    \u003ch2\u003eSeamless Integration and Compatibility\u003c\/h2\u003e\n    \u003cp\u003eFeaturing a straightforward 9-pin connector and 33-foot cable, installation is a breeze for DIY enthusiasts or pros alike. It pairs effortlessly with popular chartplotter ecosystems, supporting plug-and-play setup that gets you back on the water faster. Ideal for smaller sportfishing boats up to 25 feet, it thrives in both freshwater and saltwater environments, resisting corrosion and standing up to the rigors of frequent use.\u003c\/p\u003e\n\n    \u003ch2\u003eInstallation Insights for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eMounting a thru-hull transducer like this one requires careful hull selection—aim for a spot forward of the propellers, away from strakes or through-hulls that could interfere with the beam. Drill precisely, seal with marine sealant, and angle it per your hull's deadrise for dead-on readings. Pro tip: Test in shallow water post-install to fine-tune and verify bottom lock. Regular cleaning of the face keeps acoustics sharp, especially in algae-prone areas.\u003c\/p\u003e\n\n    \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n    \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 2em;\"\u003e\n        \u003cthead\u003e\n            \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n                \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n                \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n            \u003c\/tr\u003e\n        \u003c\/thead\u003e\n        \u003ctbody\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequency\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e50\/200 kHz Dual Broadband\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Rating\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e600 Watts\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMaximum Depth\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e3,000 Feet\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBeam Width (-3dB)\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e45° (50 kHz) \/ 12° (200 kHz)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eTilt Angle\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e20 Degrees\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e33 Feet (10 Meters)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eConnector\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e9-Pin\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eSensors\u003c\/td\u003e\n                \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eDepth \u0026amp; Temperature\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch2\u003eWhy Boaters Trust This Transducer for Long-Term Reliability\u003c\/h2\u003e\n    \u003cp\u003eIn the world of marine electronics, consistency matters. This model's tilted ceramic element fights distortion from hull deadrise, yielding more reliable depth alarms and fish arches. Anglers report spotting wrecks and drop-offs with ease, while the temp readout helps dial in lure choices based on species preferences. Its stainless construction laughs off UV exposure and biofouling, promising seasons of service without constant upkeep.\u003c\/p\u003e\n\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" style=\"margin-top: 3em;\"\u003e\n        \u003cscript type=\"application\/ld+json\"\u003e\n        {\n            \"@context\": \"https:\/\/schema.org\",\n            \"@type\": \"FAQPage\",\n            \"mainEntity\": [\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What hull deadrise angles is this 20-degree tilt transducer best suited for?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"It's optimized for boats with 16 to 24-degree hull deadrise, providing built-in compensation for accurate perpendicular sonar beams.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Does this thru-hull transducer include a temperature sensor?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Yes, it features an integrated temperature sensor for precise water temperature readings alongside depth data.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What frequencies does the SS60 operate on, and what are their benefits?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"It uses 50 kHz for wide-area deep-water coverage up to 3,000 feet and 200 kHz for high-detail shallow-water imaging.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How low-profile is the housing, and why does that matter?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Only 5mm protrudes outside the hull, reducing drag for improved boat speed and efficiency without compromising performance.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Is installation DIY-friendly for this stainless steel transducer?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Absolutely—its thru-hull design with a 9-pin plug simplifies setup; just select a clean hull spot and use proper sealant.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What's the maximum depth capability of this 600-watt model?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"It reliably tracks depths down to 3,000 feet, perfect for offshore fishing and navigation.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How long is the cable, and what connector does it use?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"33 feet (10 meters) with a 9-pin black connector for straightforward compatibility with select marine electronics.\"\n                    }\n                }\n            ]\n        }\n        \u003c\/script\u003e\n\n        \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat hull deadrise angles is this 20-degree tilt transducer best suited for?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt's optimized for boats with 16 to 24-degree hull deadrise, providing built-in compensation for accurate perpendicular sonar beams.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eDoes this thru-hull transducer include a temperature sensor?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, it features an integrated temperature sensor for precise water temperature readings alongside depth data.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat frequencies does the SS60 operate on, and what are their benefits?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt uses 50 kHz for wide-area deep-water coverage up to 3,000 feet and 200 kHz for high-detail shallow-water imaging.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow low-profile is the housing, and why does that matter?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eOnly 5mm protrudes outside the hull, reducing drag for improved boat speed and efficiency without compromising performance.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for this stainless steel transducer?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eAbsolutely—its thru-hull design with a 9-pin plug simplifies setup; just select a clean hull spot and use proper sealant.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat's the maximum depth capability of this 600-watt model?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt reliably tracks depths down to 3,000 feet, perfect for offshore fishing and navigation.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow long is the cable, and what connector does it use?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003e33 feet (10 meters) with a 9-pin black connector for straightforward compatibility with select marine electronics.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eThe SS60 is a Stainless Steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings. The SS60 is a stainless steel, thru-hull broadband transducer, ideal for smaller sport fishing and commercial vessels up to 25 Feet in length, fishing in depths of down to 3000 Feet. The low profile housing minimizes drag with just 5mm extending outside of the hull, the 20 Degree tilt is ideal for boats with a 16 Degree to 24 Degree hull deadrise. Works at 50 Kilohertz and 200 Kilohertz for good target detail in shallow water and excellent bottom tracking in deep water.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013786001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e50\/200 kHz Dual Frequency Broadband Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013786001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003e20 Degree Tilt\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eConstructed From Stainless Steel\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDual Frequency: 50 Kilohertz And 200 Kilohertz\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTemperature Sensor For Accurate Water Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCalculates Depth\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013786001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cstrong\u003eXSONIC SS60 Stainless Steel 20° Tilt Thru-Hull Depth\/Temp Transducer - 9-Pin - 10M Cable\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe SS60 is a stainless steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDepth\/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings\u003c\/li\u003e\n\u003cli\u003eEasy To Install\u003c\/li\u003e\n\u003cli\u003eDual Frequency - Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water\u003c\/li\u003e\n\u003cli\u003eHighly Accurate - Provides extremely accurate data\u003c\/li\u003e\n\u003cli\u003e20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise\u003c\/li\u003e\n\u003cli\u003eLow Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Connection - Easily connect to NSSevo3, Lowrance HDS G3\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSimrad SS60 stainless steel 600 W through the hull 50200 Khz depth temperature (20 tilt) model 000 13786 001 to calculate the depth of the water, in order to avoid running down on the ground, at the same time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-66459\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13786-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161975\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538878476381,"sku":"CWR-66459","price":478.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss60-stainless-1.jpg?v=1673109508"},{"product_id":"77726-navico-xsonic-p319-plastic-low-profile-th","title":"Navico XSONIC P319 Plastic Low Profile TH 50\/200 9-Pin 600W Connector - 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction-benefits\"\u003e\n    \u003cp\u003eImagine gliding through choppy waters or navigating shallow bays with confidence, knowing your sonar setup delivers crystal-clear readings every time. The XSONIC P319 stands out as a reliable thru-hull transducer designed for boaters who demand precision without the bulk. Its dual-frequency capability captures fine details in shallows while locking onto the bottom in deeper zones, making it a go-to choice for powerboats and sailboats alike.\u003c\/p\u003e\n    \n    \u003cp\u003eWhat sets this sensor apart? It punches through a single hull hole to provide both depth and temperature insights, streamlining your setup and reducing potential weak points. Boaters often rave about how its slim design hugs the hull, protruding just a whisper-thin amount to slash drag and keep your vessel slicing efficiently.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Everyday Boating Adventures\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-Frequency Powerhouse:\u003c\/strong\u003e Switch seamlessly between 50 kHz for deep-water bottom tracking—covering wide areas up to impressive depths—and 200 kHz for sharp, detailed images in shallower spots where fish hide close to structure.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUltra-Low Profile:\u003c\/strong\u003e Only 5mm extends beyond the hull, minimizing water resistance and protecting against impacts from debris or docking mishaps.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Depth and Temp Sensing:\u003c\/strong\u003e Get real-time water temperature alongside depth data, essential for spotting thermoclines where fish congregate.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust 600W Output:\u003c\/strong\u003e Delivers strong signal returns even in turbulent conditions, ensuring reliable performance from your fishfinder or chartplotter.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRight-Angle Cable Design:\u003c\/strong\u003e The 10-meter cable exits at a practical angle, saving headroom below deck and shielding connections from foot traffic.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-insights\"\u003e\n    \u003ch2\u003ePerformance Tailored to Real-World Conditions\u003c\/h2\u003e\n    \u003cp\u003eIn shallow coastal waters, the narrower 12-degree beam at 200 kHz paints a vivid picture of the seafloor, revealing drop-offs, wrecks, and bait schools with pinpoint accuracy. Venture offshore, and the broader 45-degree beam at 50 kHz excels at maintaining bottom lock amid waves, helping you avoid shallows during long runs.\u003c\/p\u003e\n    \n    \u003cp\u003eUsers appreciate its sensitivity to subtle changes—think marking suspended game fish or tracking your lure's path. Pair it with modern multifunction displays, and you'll unlock CHIRP-like clarity from this conventional transducer, often outperforming bulkier alternatives in speedboats where every ounce counts.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eInstallation Made Straightforward for DIY Enthusiasts\u003c\/h2\u003e\n    \u003cp\u003eFitting the P319 requires minimal hull prep: drill one precise hole, secure with the included hardware, and route the cable cleanly. The plastic housing thrives in fiberglass hulls, while the rubber washer adapts to uneven surfaces for a watertight seal. Pro tip: Fair the transducer to your hull's deadrise angle during install for optimal signal projection—no tilt model means aligning it dead level for best results.\u003c\/p\u003e\n    \n    \u003cp\u003eCommon pitfalls? Over-tightening can crack the housing, so torque gently. Below the waterline placement enhances readings, but always bed it in marine sealant for longevity. Most installs wrap up in under an hour, leaving you back on the water sooner.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"durability-tips\"\u003e\n    \u003ch2\u003eBuilt Tough for Seasons of Reliable Service\u003c\/h2\u003e\n    \u003cp\u003eCrafted with ABYC-compliant materials, this plastic thru-hull withstands UV exposure, corrosion, and the rigors of saltwater. Regular freshwater rinses after outings prevent buildup, and annual checks on the hull nut keep it secure. Boaters report years of trouble-free use, even in high-traffic marinas where low profiles dodge prop strikes.\u003c\/p\u003e\n    \n    \u003cp\u003eFor maintenance, inspect the face for marine growth— a quick wipe restores performance. Its single ceramic element simplifies cleaning compared to multi-element designs, keeping your sonar humming without fuss.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the XSONIC P319 transducer include a temperature sensor?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it integrates both depth and temperature sensing through a single thru-hull mount, providing valuable water temp data alongside sonar readings.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types is the P319 best suited for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's ideal for fiberglass planing hull powerboats and sailboats. The plastic housing works well with non-metal hulls, avoiding galvanic issues.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does the dual-frequency perform in shallow vs. deep water?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"At 200 kHz, it offers detailed shallow-water imaging with a 12-degree beam. Switch to 50 kHz for broad-coverage deep-water tracking using a 45-degree beam.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this transducer suitable for high-speed boating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—its low-profile design protrudes just 5mm, reducing drag and maintaining accurate readings at planing speeds.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the cable length and connector type?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It comes with a 10-meter cable featuring a 9-pin connector, compatible with many popular marine electronics units.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it require a speed sensor?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, this model focuses on depth and temperature without a built-in speed log, keeping the design compact.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I maintain the transducer for longevity?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with fresh water after use, check seals annually, and clean the face gently to remove growth—simple steps for years of service.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cstrong\u003eXSONIC P319 Plastic Low Profile TH 50\/200 9-Pin 600W Connector - 10M Cable\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe P319 is a compact, plastic, thru-hull, dual-frequency (50\/200 kHz) sensor that offers depth and temperature data. Ideal for planing hull powerboats and sailboats.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDepth\/Temperature\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eRequires just one hole in the hull to receive data for both depth and temperature\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eDual Frequency\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eWorks at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eHighly Accurate\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eProvides extremely accurate data\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eLow Profile\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eJust 5mm extends outside of the hull\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFrequency: 50\/200 kHz\u003c\/li\u003e\n\u003cli\u003ePower Rating: 600W\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor: No\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: No\u003c\/li\u003e\n\u003cli\u003eMounting Style: Plastic Thru-Hull\u003c\/li\u003e\n\u003cli\u003eElements: 1\u003c\/li\u003e\n\u003cli\u003eBeamwidth @ -3dB: 45 (50 kHz) 12 (200 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe sensor has a black 9-pin plug that can be directly connected to the man-machine interface. It only needs a hole in the hull to receive depth and temperature data. This ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-66615\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13915-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162705\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538912718941,"sku":"CWR-66615","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-p319-plastic-1.jpg?v=1673110137"},{"product_id":"77945-navico-xsonic-tm185m-transom-mount-transducer","title":"Navico XSONIC TM185M Transom Mount Transducer","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eDiscover Superior Fishfinding with the TM185M Transom Mount Transducer\u003c\/h2\u003e\n    \u003cp\u003eAnglers chasing trophy fish in open waters or navigating murky freshwater lakes know the value of crystal-clear sonar imagery. The TM185M stands out as a reliable choice for boaters seeking an affordable yet powerful upgrade to their fishfinder setup. With its medium-frequency CHIRP technology sweeping from 85 to 135 kHz, it excels at separating fish targets from clutter, even in challenging conditions like shallow bays or sediment-heavy rivers.\u003c\/p\u003e\n    \u003cp\u003ePerfect for smaller vessels up to 25 feet, this transom-mounted unit delivers impressive performance without the complexity of thru-hull installations. Its rugged urethane housing withstands rough seas and repeated launches, ensuring consistent results trip after trip.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Medium CHIRP Technology Changes the Game\u003c\/h2\u003e\n    \u003cp\u003eUnlike traditional fixed-frequency sonar that can miss subtle details, CHIRP transmits a continuous sweep of frequencies. This results in sharper images, better target separation, and deeper penetration—up to 1,500 feet in ideal conditions. For offshore pursuits targeting species like snapper or grouper, or freshwater hunts for walleye in weedy shallows, the TM185M provides the resolution you need to mark fish with confidence.\u003c\/p\u003e\n    \u003cp\u003ePaired with compatible Navico chartplotters and sounders, it also tracks water temperature, helping you locate bait schools and thermoclines where big catches hang out.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation for Weekend Warriors\u003c\/h2\u003e\n    \u003cp\u003eSetting up the TM185M is straightforward, making it ideal for DIY enthusiasts. Mount it securely on your transom with hull deadrise angles from 2 to 20 degrees—no hull modifications required. The lightweight design (just over 1 pound) simplifies handling, and the included hardware ensures a watertight seal.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Position it outside the boat's wake path for optimal readings, and route cables away from electrical interference. Most installs take under an hour, getting you back on the water faster.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Applications for Every Angler\u003c\/h2\u003e\n    \u003cp\u003eOffshore anglers appreciate its power handling up to 1 kW, punching through saltwater layers to reveal structure and fish at medium depths. Freshwater users love how it cuts through mud lines to spotlight crappie or bass holding near drop-offs.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOffshore Trolling:\u003c\/strong\u003e Spot pelagic species with unmatched clarity.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eInshore Flats:\u003c\/strong\u003e Detect fish hugging the bottom in skinny water.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLake Fishing:\u003c\/strong\u003e Track schools in stained water during dawn patrols.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIts high-performance build shines in demanding environments, from pounding waves to trailer launches.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eCare and Longevity Tips\u003c\/h2\u003e\n    \u003cp\u003eTo maximize lifespan, rinse with fresh water after saltwater use and inspect the face for marine growth. Store in a cool, dry place during off-seasons. With proper maintenance, expect years of dependable service backed by a solid manufacturer warranty.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boats is the TM185M transducer best suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's designed for smaller boats up to 25 feet long, with transom mounting that works on hulls with 2 to 20 degrees deadrise.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How deep can the TM185M detect fish?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It performs reliably up to 1,500 feet in optimal conditions, thanks to its 1 kW power and medium CHIRP frequencies.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it measure water temperature?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it includes temperature sensing alongside depth and fishfinding capabilities.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation difficult for beginners?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, it's user-friendly with simple transom mounting and basic tools needed—most users complete it quickly.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What makes CHIRP better than standard sonar?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"CHIRP uses a range of frequencies for wider cones, sharper images, and superior target ID compared to single-frequency sonar.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can it handle saltwater fishing?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely, its durable urethane housing is built for harsh marine environments.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What frequency range does it cover?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It operates from 85 to 135 kHz, ideal for medium-depth scanning in various water types.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat boats is the TM185M transducer best suited for?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for smaller boats up to 25 feet long, with transom mounting that works on hulls with 2 to 20 degrees deadrise.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow deep can the TM185M detect fish?\u003c\/summary\u003e\n        \u003cp\u003eIt performs reliably up to 1,500 feet in optimal conditions, thanks to its 1 kW power and medium CHIRP frequencies.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it measure water temperature?\u003c\/summary\u003e\n        \u003cp\u003eYes, it includes temperature sensing alongside depth and fishfinding capabilities.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation difficult for beginners?\u003c\/summary\u003e\n        \u003cp\u003eNo, it's user-friendly with simple transom mounting and basic tools needed—most users complete it quickly.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat makes CHIRP better than standard sonar?\u003c\/summary\u003e\n        \u003cp\u003eCHIRP uses a range of frequencies for wider cones, sharper images, and superior target ID compared to single-frequency sonar.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan it handle saltwater fishing?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely, its durable urethane housing is built for harsh marine environments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat frequency range does it cover?\u003c\/summary\u003e\n        \u003cp\u003eIt operates from 85 to 135 kHz, ideal for medium-depth scanning in various water types.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThis economical Chirp transducer is designed for offshore fishing and freshwater anglers. Operating at a frequency range of 85 to 135 Kilohertz, these transducers reveal fish in shallow, murky waters at medium depths (up to 1,500 Feet) along with ultra-clear target resolution.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013998001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1500 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e85-135 kHz Medium Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013998001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eEconomical Chirp Transducer Is Designed For Offshore Fishing And Freshwater Anglers\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eOperating At A Frequency Range Of 85 To 135 Kilohertz\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013998001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC TM185M Transom Mount Transducer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs Chirp continues to redefine recreational fishing, AIRMAR has expanded the lineup of single band transducers to satisfy the growing demand for this game changing technology. The TM185M, an economical Chirp transducer, is designed for offshore fishing and freshwater anglers. Operating at a frequency range of 85-135 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 1,500 feet*) along with ultra-clear target resolution.\u003c\/p\u003e\u003cp\u003eDesigned for smaller boats up to 25’, the TM185M is available as a transom-mount transducer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDepth \u0026amp; Temperature\u003c\/li\u003e\n\u003cli\u003eChirp Technology\u003c\/li\u003e\n\u003cli\u003e1 kW\u003c\/li\u003e\n\u003cli\u003eHigh-Performance\u003c\/li\u003e\n\u003cli\u003eUrethane Housing\u003c\/li\u003e\n\u003cli\u003eExclusive Transducer ID®\u003cul\u003e\n\u003cli\u003eWeight: 0.45 kg (1.1 lb)\u003c\/li\u003e\n\u003cli\u003eHull Deadrise: 2° to 20°\u003c\/li\u003e\n\u003cli\u003eAcoustic Window: Urethane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eLowrance TM185M Medium CHIRP Model: 000-13998-001 This economical Chirp sensor is designed for offshore fishing and freshwater anglers. Operating in the frequency range of 85...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-66834\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13998-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024165928\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538946830429,"sku":"CWR-66834","price":1331.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-tm185m-transom-1.jpg?v=1673110743"},{"product_id":"78119-navico-xsonic-ss75m-depth-temperature-transducer-00","title":"Navico XSONIC SS75M Depth\/Temperature Transducer 0\u0026deg; - 9-Pin - 600W - 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n\n\u003cp\u003eDiscover the precision and reliability that serious boaters and anglers demand with this advanced thru-hull transducer. Designed for seamless integration into your marine electronics setup, it delivers crystal-clear underwater insights, helping you navigate challenging waters and locate fish with unmatched accuracy. Whether you're chasing trophy species in deep offshore waters or tracking structure in coastal shallows, this unit stands out for its robust construction and cutting-edge CHIRP technology.\u003c\/p\u003e\n\n\u003ch2\u003eSuperior CHIRP Performance for Deeper Insights\u003c\/h2\u003e\n\n\u003cp\u003eAt the heart of this transducer lies medium-frequency CHIRP capability, sweeping from 80 kHz to 130 kHz. Unlike traditional fixed-frequency sonar, CHIRP transmits across a broad spectrum of frequencies simultaneously. This results in remarkably detailed images—up to 5 to 10 times sharper than conventional systems. Imagine distinguishing a school of baitfish from a lurking predator or spotting subtle bottom contours that could hide your next big catch.\u003c\/p\u003e\n\n\u003cp\u003eIn shallow waters, the higher frequencies provide exceptional target separation, letting you identify individual fish amid the clutter. As depths increase, the lower end of the CHIRP range excels at bottom tracking, maintaining lock on the seafloor even in hundreds of feet of water. Paired with its 600-watt power rating, you'll get reliable performance from coastal bays to bluewater adventures.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Durability and Minimal Intrusion\u003c\/h2\u003e\n\n\u003cp\u003eCrafted from high-grade stainless steel, this thru-hull mount withstands the harsh marine environment—saltwater corrosion, impacts from debris, and constant wave action. The low-profile housing protrudes just 5mm beyond the hull, reducing drag to keep your boat planing efficiently without compromising speed or fuel economy.\u003c\/p\u003e\n\n\u003cp\u003eThe 0-degree tilt design suits hulls with deadrise angles from 0 to 7 degrees, while the internally tilted ceramic element compensates for hull angle, ensuring optimal echo returns. This built-in deadrise adjustment means accurate depth readings right out of the box, without needing custom tilting kits.\u003c\/p\u003e\n\n\u003ch2\u003eEssential Depth and Temperature Data\u003c\/h2\u003e\n\n\u003cp\u003eNever guess at water depth again. This dual-function sensor provides precise depth measurements to help avoid groundings and optimize trolling speeds. Integrated temperature sensing tracks water column changes, crucial for locating thermoclines where fish congregate. Real-time data feeds directly to your chartplotter, enhancing situational awareness during critical moments.\u003c\/p\u003e\n\n\u003ch2\u003eEffortless Installation and Connectivity\u003c\/h2\u003e\n\n\u003cp\u003eInstallation is straightforward for DIY enthusiasts or pros. Drill a clean hole through the hull, bed the transducer in sealant, and secure it—no complex alignments required. The included 10-meter (33-foot) cable reaches most helm stations, and the 9-pin connector offers plug-and-play compatibility with popular Simrad and Lowrance displays.\u003c\/p\u003e\n\n\u003cp\u003ePro tips for best results:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePosition it forward of props and keels to minimize interference.\u003c\/li\u003e\n\u003cli\u003eMount on the flattest section of hull for deadrise matching.\u003c\/li\u003e\n\u003cli\u003eUse marine-grade sealant like 3M 4200 for a watertight seal.\u003c\/li\u003e\n\u003cli\u003eTest in shallow water post-install to verify bottom lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOnce connected, it integrates seamlessly, delivering data to multifunction displays without additional calibrations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications at a Glance\u003c\/h2\u003e\n\n\u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 20px;\" border=\"1\" cellpadding=\"10\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f4f4f4;\"\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 10px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 10px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eFrequency\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eMedium CHIRP (80-130 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003ePower Rating\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003e600 Watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eBeam Width (-3 dB)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003e24° to 16°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eMounting Style\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eThru-Hull (Stainless Steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eSensors\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eDepth \u0026amp; Temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eCable Length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003e10 Meters (33 Feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eConnector\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003e9-Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003eHull Deadrise\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px;\"\u003e0° to 7°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Boaters Trust This Transducer\u003c\/h2\u003e\n\n\u003cp\u003eAnglers report game-changing improvements in fish-finding efficiency. The enhanced resolution reveals wrecks, drop-offs, and bait balls invisible to lesser units. Offshore captains appreciate the deep-water bottom tracking during long runs. Its rugged build handles rough conditions, from pounding through chop to trailering over bumpy roads.\u003c\/p\u003e\n\n\u003cp\u003eMaintenance is simple: Rinse with freshwater after saltwater use, inspect the face for growth, and store dry during off-seasons. This longevity ensures years of dependable service, making it a smart upgrade for any vessel.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What hull types is this transducer best suited for?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It's optimized for boats with 0 to 7-degree deadrise angles. The internal ceramic tilt compensates for hull angle, ensuring accurate readings on planing hulls and displacement vessels.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it work with both Simrad and Lowrance fishfinders?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the 9-pin connector provides plug-and-play compatibility with compatible Simrad NS series and Lowrance HDS Gen3 or newer models.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does CHIRP technology improve over standard sonar?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"CHIRP sends multiple frequencies at once for finer target detail, better separation of fish and structure, and reliable bottom lock in varied depths—far superior to single-frequency sonar.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is professional installation required?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No, it's designed for easy thru-hull mounting with basic tools. Follow hull thickness guidelines (up to 68mm) and use proper sealant for a secure fit.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What maintenance does it need in saltwater?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Rinse the transducer face with fresh water after each use, avoid antifouling paints on the active face, and check cable connections seasonally for corrosion.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can it detect temperature variations?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely. The built-in sensor provides accurate surface water temperature readings, helping identify productive zones influenced by thermal layers.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What's the maximum depth capability?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Depth performance depends on boat speed, water conditions, and display unit, but it excels up to 3,000+ feet in ideal scenarios with medium CHIRP.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"faq-list\"\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat hull types is this transducer best suited for?\u003c\/h3\u003e\n\u003cp\u003eIt's optimized for boats with 0 to 7-degree deadrise angles. The internal ceramic tilt compensates for hull angle, ensuring accurate readings on planing hulls and displacement vessels.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eDoes it work with both Simrad and Lowrance fishfinders?\u003c\/h3\u003e\n\u003cp\u003eYes, the 9-pin connector provides plug-and-play compatibility with compatible Simrad NS series and Lowrance HDS Gen3 or newer models.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eHow does CHIRP technology improve over standard sonar?\u003c\/h3\u003e\n\u003cp\u003eCHIRP sends multiple frequencies at once for finer target detail, better separation of fish and structure, and reliable bottom lock in varied depths—far superior to single-frequency sonar.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs professional installation required?\u003c\/h3\u003e\n\u003cp\u003eNo, it's designed for easy thru-hull mounting with basic tools. Follow hull thickness guidelines (up to 68mm) and use proper sealant for a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat maintenance does it need in saltwater?\u003c\/h3\u003e\n\u003cp\u003eRinse the transducer face with fresh water after each use, avoid antifouling paints on the active face, and check cable connections seasonally for corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan it detect temperature variations?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. The built-in sensor provides accurate surface water temperature readings, helping identify productive zones influenced by thermal layers.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat's the maximum depth capability?\u003c\/h3\u003e\n\u003cp\u003eDepth performance depends on boat speed, water conditions, and display unit, but it excels up to 3,000+ feet in ideal scenarios with medium CHIRP.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n.faq-item { margin-bottom: 20px; padding: 15px; border: 1px solid #eee; border-radius: 5px; }\n.faq-item h3 { margin-top: 0; color: #333; }\ntable th, table td { vertical-align: top; }\n@media (max-width: 768px) { table { font-size: 14px; } }\n\u003c\/style\u003e\u003cp\u003eThe SS75M is a bronze, thru-hull, non-tilted, medium-frequency (80 to 130 Kilohertz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013908001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e80-130 kHz Medium Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 Degree Tilt\/ 0 To 7 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013908001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Transducers Enable Bottom Detection With 5 To 10 Times Greater Detail And Resolution So Precise It’s Possible To Distinguish Between Individual Baitfish, Game Fish, And Underwater Structures\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCalculates How Deep The Water Is, So That You Can Avoid Running Aground, Whilst Also Incorporating A Temperature Sensor For Accurate Water Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Range Is 80 Kilohertz To 130 Kilohertz For Good Target Detail In Shallow Water And Excellent Bottom Tracking In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eProvides Extremely Accurate Data\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e0 Degree Tilt Is Ideal For Boats With A 0 Degree To 14 Degree Hull Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLow Profile Housing Minimizes Drag With Just 5 Millimeter Extending Outside Of The Hull\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003ePlug And Play Connection: Easily Connect To Simrad NSSevo3 Or Lowrance HDS Gen3\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013908001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSS75M Depth\/Temperature Transducer 0° - 9-Pin - 600W - 10M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SS75M is a stainless steel, thru-hull, non-tilted, medium-frequency (80-130kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCHIRP - CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures.\u003c\/li\u003e\n\u003cli\u003eDepth\/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings.\u003c\/li\u003e\n\u003cli\u003eEasy To Install\u003c\/li\u003e\n\u003cli\u003eMedium Frequency - CHIRP range is 80kHz-130kHz for good target detail in shallow water and excellent bottom tracking in deep water.\u003c\/li\u003e\n\u003cli\u003eHighly Accurate - Provides extremely accurate data.\u003c\/li\u003e\n\u003cli\u003e0° Tilt - The 0° tilt is ideal for boats with a 0° to 7° hull deadrise.\u003c\/li\u003e\n\u003cli\u003eLow Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull.\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Connection - Easily connect to Simrad NSSevo3 or Lowrance HDS Gen3\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSimrad ss75m 0 degree tilt model: 000-13908-001 chirp sensor improves the details and resolution of bottom detection by 5 to 10 times, so it is as accurate as possible...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-67008\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13908-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162637\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538989101149,"sku":"67008","price":879.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss75m-depth-1.jpg?v=1673111143"},{"product_id":"78138-navico-xsonic-ss75h-depth-temperature-transducer-200","title":"Navico XSONIC SS75H Depth\/Temperature Transducer 20\u0026deg; - 9-Pin - 600W - 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eUpgrade your boating experience with the XSONIC SS75H, a powerhouse stainless steel thru-hull transducer designed for anglers and navigators who demand precision in every cast and cruise. Perfect for vessels up to 8 meters, this high-frequency CHIRP sensor dives deep—up to 3,000 meters—revealing the underwater world with stunning clarity. Imagine separating schools of baitfish from trophy game fish or spotting hidden structures that could make or break your day on the water. Its 20-degree tilted element compensates for hull deadrise, ensuring rock-solid readings without guesswork.\u003c\/p\u003e\n    \n    \u003cp\u003eWhat sets the SS75H apart? It's not just about raw power at 600 watts; it's the broadband CHIRP technology sweeping 130-210 kHz that delivers target detail five to ten times sharper than traditional sonar. Paired with a built-in temperature sensor, you'll get real-time water data to optimize lure selection and fish behavior predictions. Low-profile design hugs the hull, slicing through water with minimal drag—only 5mm protrudes outside.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-section\"\u003e\n    \u003ch2\u003eUnlock Superior Underwater Insights\u003c\/h2\u003e\n    \u003cp\u003eCHIRP transducers like the SS75H transform your fishfinder display into a high-definition map of the depths. Traditional fixed-frequency sonar often muddles echoes from fish, thermoclines, and bottom contours. But with continuous frequency sweeps, you get crisp separation: individual fish arches pop vividly, bait balls stand out, and wrecks or drop-offs reveal their secrets. This means fewer false positives and more hookups, especially in shallow bays or coastal runs where high-frequency excels.\u003c\/p\u003e\n    \n    \u003cul class=\"benefit-list\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExceptional Target Resolution:\u003c\/strong\u003e Spot the difference between a striped bass and a school of herring at a glance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDeep Water Confidence:\u003c\/strong\u003e Track bottom reliably down to 3,000 meters, ideal for offshore adventures.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWater Temp Precision:\u003c\/strong\u003e Monitor changes that signal feeding frenzies or migrations.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDrag-Free Performance:\u003c\/strong\u003e Streamlined housing boosts speed and fuel efficiency.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"features-section\"\u003e\n    \u003ch2\u003eEngineered for Real-World Demands\u003c\/h2\u003e\n    \u003cp\u003eBuilt tough from marine-grade stainless steel, the SS75H withstands corrosion, impacts, and constant submersion. The 20-degree tilt matches hulls with 16-24 degree deadrise angles common on planing hulls, eliminating air bubbles and shadows for consistent pings. Its 9-pin plug-and-play connector simplifies setup, while the 10-meter cable reaches most helm stations without splicing.\u003c\/p\u003e\n    \n    \u003cdiv class=\"features-grid\"\u003e\n      \u003cul\u003e\n        \u003cli\u003eThru-hull mount for optimal signal path.\u003c\/li\u003e\n        \u003cli\u003eHigh CHIRP: 130-210 kHz for shallow-to-mid depth mastery.\u003c\/li\u003e\n        \u003cli\u003eBeamwidth: 15° to 9° at -3dB for focused coverage.\u003c\/li\u003e\n        \u003cli\u003eSingle ceramic element with exclusive ID for seamless integration.\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003cul\u003e\n        \u003cli\u003ePower: 600W RMS for punchy signals.\u003c\/li\u003e\n        \u003cli\u003eNo speed sensor—pure focus on depth and temp.\u003c\/li\u003e\n        \u003cli\u003e33-foot cable for flexible routing.\u003c\/li\u003e\n        \u003cli\u003eCompact: Minimal hull penetration.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eEffortless Installation for DIY Enthusiasts\u003c\/h2\u003e\n    \u003cp\u003eInstalling the SS75H is straightforward, but a few pro tips elevate results. Select a spot forward of the prop, 1\/3 amidships, away from strakes or thru-hulls that disrupt flow. Fair the housing to match deadrise using epoxy filler for bubble-free operation. Drill with a holesaw matching the 75mm flange, bed in marine sealant, and torque to spec. Route the cable through bulkheads with strain relief—test in a bucket of water before launch to verify no leaks or shorts.\u003c\/p\u003e\n    \n    \u003cp\u003ePro Tip: For stepped hulls, position low to avoid aeration at speed. Always disconnect power during install to safeguard electronics.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"use-cases\"\u003e\n    \u003ch2\u003eIdeal Applications for Every Angler\u003c\/h2\u003e\n    \u003cp\u003eCoastal kayak fishermen love its shallow-water prowess for flounder gigs. Tournament bass pros rely on it for structure scanning in reservoirs. Charter captains chasing pelagics appreciate deep tracking during drifts. Even sailboat owners value the temp sensor for current edges. Versatile across freshwater and saltwater, it's a go-to for anyone prioritizing sonar quality over gimmicks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"tech-specs\"\u003e\n    \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n    \u003ctable class=\"spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eAttribute\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMounting\u003c\/td\u003e\n          \u003ctd\u003eThru-Hull, Stainless Steel\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFrequency\u003c\/td\u003e\n          \u003ctd\u003eHigh CHIRP 130-210 kHz\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePower\u003c\/td\u003e\n          \u003ctd\u003e600 Watts\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMax Depth\u003c\/td\u003e\n          \u003ctd\u003e10,000 ft (3,000 m)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTilt\u003c\/td\u003e\n          \u003ctd\u003e20° (16-24° Deadrise)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eConnectors\u003c\/td\u003e\n          \u003ctd\u003e9-Pin\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCable Length\u003c\/td\u003e\n          \u003ctd\u003e10 m (33 ft)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSensors\u003c\/td\u003e\n          \u003ctd\u003eDepth \u0026amp; Temperature\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBeamwidth\u003c\/td\u003e\n          \u003ctd\u003e15° to 9° (-3dB)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHousing Projection\u003c\/td\u003e\n          \u003ctd\u003e5 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eMaximize Longevity with Simple Care\u003c\/h2\u003e\n    \u003cp\u003eWipe the face monthly with a soft cloth and mild soap to remove growth. Inspect cable for chafing annually. If fouled, gentle pressure washing restores performance—no harsh chemicals needed. In cold climates, haul out to prevent ice damage. With proper upkeep, expect years of reliable service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What boats is the SS75H transducer best suited for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's ideal for smaller powerboats and fishing vessels up to 8 meters with 16-24 degree hull deadrise, providing excellent performance in coastal and inland waters.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does CHIRP technology improve fishing results?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"CHIRP sweeps multiple frequencies (130-210 kHz here), offering sharper images, better fish separation, and clearer bottom detail than single-frequency sonar, helping you target specific species accurately.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the SS75H easy to install on my own?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, with basic tools: drill a hole, seal the housing, route the cable, and connect the 9-pin plug. Follow hull-specific guidelines for best results.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum depth capability?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Up to 10,000 feet (3,000 meters), with strong bottom tracking and resolution throughout shallow to deep ranges.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it measure water temperature?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—a dedicated sensor provides precise readings to track thermal layers and fish activity.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Why choose stainless steel over plastic?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Stainless steel offers superior durability against corrosion, impacts, and marine growth, ensuring long-term reliability in harsh saltwater environments.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will it work at high speeds?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, the low-profile design (5mm protrusion) minimizes drag and ventilation, maintaining clear sonar even on planes.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat boats is the SS75H transducer best suited for?\u003c\/summary\u003e\n        \u003cp\u003eIt's ideal for smaller powerboats and fishing vessels up to 8 meters with 16-24 degree hull deadrise, providing excellent performance in coastal and inland waters.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow does CHIRP technology improve fishing results?\u003c\/summary\u003e\n        \u003cp\u003eCHIRP sweeps multiple frequencies (130-210 kHz here), offering sharper images, better fish separation, and clearer bottom detail than single-frequency sonar, helping you target specific species accurately.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the SS75H easy to install on my own?\u003c\/summary\u003e\n        \u003cp\u003eYes, with basic tools: drill a hole, seal the housing, route the cable, and connect the 9-pin plug. Follow hull-specific guidelines for best results.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the maximum depth capability?\u003c\/summary\u003e\n        \u003cp\u003eUp to 10,000 feet (3,000 meters), with strong bottom tracking and resolution throughout shallow to deep ranges.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it measure water temperature?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—a dedicated sensor provides precise readings to track thermal layers and fish activity.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhy choose stainless steel over plastic?\u003c\/summary\u003e\n        \u003cp\u003eStainless steel offers superior durability against corrosion, impacts, and marine growth, ensuring long-term reliability in harsh saltwater environments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill it work at high speeds?\u003c\/summary\u003e\n        \u003cp\u003eYes, the low-profile design (5mm protrusion) minimizes drag and ventilation, maintaining clear sonar even on planes.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description-content { max-width: 800px; line-height: 1.6; font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif; }\n  h2 { color: #333; border-bottom: 2px solid #007bff; padding-bottom: 10px; }\n  h3 { color: #555; }\n  ul, ol { padding-left: 20px; }\n  .features-grid { display: grid; grid-template-columns: 1fr 1fr; gap: 20px; }\n  .spec-table { width: 100%; border-collapse: collapse; margin: 20px 0; }\n  .spec-table th, .spec-table td { border: 1px solid #ddd; padding: 12px; text-align: left; }\n  .spec-table th { background: #f8f9fa; font-weight: bold; }\n  .faq-list details { margin-bottom: 15px; border: 1px solid #eee; padding: 15px; border-radius: 8px; }\n  .faq-list summary { cursor: pointer; font-weight: bold; }\n  .benefit-list li { margin-bottom: 10px; }\n\u003c\/style\u003e\u003cp\u003ePerfect for smaller boats up to 8 Meter, this stainless steel through hull mounted CHIRP transducer enables bottom detection down to 3,000 Meter with great detail and resolution. This transducer makes it possible to distinguish between individual baitfish, game fish and underwater structures.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013913001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e10000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e130-210 kHz High Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Degree Tilt\/ 16 To 24 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013913001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eCalculates How Deep The Water Is\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTemperature Sensor For Accurate Water Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Range Is 130 Kilohertz To 210 Kilohertz For Good Target Detail In Shallow Water And Excellent Bottom Tracking In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLow Profile Housing Minimizes Drag With Just 5mm Extending Outside Of The Hull\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e20 Degree Tilt Is Ideal For Boats With A 16 Degree To 24 Degree Hull Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013913001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC SS75H Depth\/Temperature Transducer 20° - 9-Pin - 600W - 10M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SS75H is a Stainless Steel, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCHIRP - CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures\u003c\/li\u003e\n\u003cli\u003eDepth\/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings\u003c\/li\u003e\n\u003cli\u003eEasy To Install\u003c\/li\u003e\n\u003cli\u003eHigh Frequency - CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water\u003c\/li\u003e\n\u003cli\u003eHighly Accurate - Provides extremely accurate data.\u003c\/li\u003e\n\u003cli\u003e20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise.\u003c\/li\u003e\n\u003cli\u003eLow Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull.\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Connection - Easily connect to NSSevo3, Lowrance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency: High CHIRP (130-210kHz)\u003c\/li\u003e\n\u003cli\u003ePower Rating: 600W\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor: No\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Yes\u003c\/li\u003e\n\u003cli\u003eMounting Style: Thru-Hull\u003c\/li\u003e\n\u003cli\u003eElements: 1\u003c\/li\u003e\n\u003cli\u003eBeamwidth @ -3dB: 15° to 9°\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe ceramic element is tilted to achieve built-in dead-angle compensation, which provides excellent echoes for more accurate depth readings. The 20 incline is ideal for boats between 20 and 24 feet.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-67027\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13913-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 09420024162682\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538995425373,"sku":"67027","price":644.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss75h-depth-1.jpg?v=1673111198"},{"product_id":"78139-navico-xsonic-ss75h-depth-temperature-transducer-120","title":"Navico XSONIC SS75H Depth\/Temperature Transducer 12\u0026deg; - 9-Pin - 600W - 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n\n  \u003csection class=\"transducer-benefits\"\u003e\n    \u003ch2\u003eUnlock Crystal-Clear Underwater Insights with the SS75H CHIRP Transducer\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding through coastal waters or venturing offshore, confident that every sonar ping reveals hidden fish schools, precise depths, and subtle bottom contours. The SS75H stands out as a game-changer for smaller vessels up to 8 meters, blending rugged stainless steel construction with advanced CHIRP technology. This thru-hull powerhouse sweeps high frequencies from 130-210 kHz, delivering exceptional target separation that turns murky depths into a clear map—spotting baitfish from predators and navigating structure with ease.\u003c\/p\u003e\n    \u003cp\u003eWhat sets it apart? Its built-in 12-degree tilt perfectly matches hulls with 8-15 degree deadrise, ensuring dead-on readings without extra adjustments. Plus, that sleek low-profile design protrudes just 5mm beyond the hull, slashing drag so you maintain speed and fuel efficiency on longer trips.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features Tailored for Serious Anglers\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Definition CHIRP Imaging:\u003c\/strong\u003e 130-210 kHz range excels in shallow waters for fine details and locks onto bottoms up to 3,000 meters deep, outperforming traditional fixed-frequency sonar.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual Depth and Temperature Sensing:\u003c\/strong\u003e Real-time water depth prevents groundings, while integrated temp readings help track thermoclines where fish congregate.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStainless Steel Durability:\u003c\/strong\u003e Corrosion-resistant housing thrives in saltwater, standing up to years of pounding waves and rough handling.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Connectivity:\u003c\/strong\u003e 9-pin plug-and-play setup pairs seamlessly with popular chartplotters, transmitting data without fuss.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact 600W Power:\u003c\/strong\u003e Balances punchy performance with efficient energy use, ideal for compact electronics suites.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e 10-meter cable gives flexible routing options during installation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-tips\"\u003e\n    \u003ch2\u003eMaximize Performance on Your Next Outing\u003c\/h2\u003e\n    \u003cp\u003eFishermen swear by the SS75H for its ability to cut through clutter. In shallow bays, the wide beamwidth (15° to 9° at -3dB) paints a broad picture, revealing wrecks and reefs. Deeper offshore, narrow beams track the bottom like a laser, helping you drift over sweet spots. Pair it with modern multifunction displays, and you'll enjoy auto-tuning that sharpens images on the fly, reducing noise from boat wakes or bait balls.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Mount it forward of props and rudders to avoid turbulence interference. For trailered boats, its robust build handles frequent launches without compromising seal integrity.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eSimple Installation for Quick Setup\u003c\/h2\u003e\n    \u003cp\u003eGetting the SS75H up and running takes skill but minimal tools. Drill a precise hole matching the hull curve, bed the transducer in marine sealant, and secure the nut from inside. The tilted element self-aligns for your deadrise angle—no shims needed. Route the 33-foot cable neatly through bulkheads, and connect to your unit's 9-pin port. Test in shallow water to confirm clear returns before heading out.\u003c\/p\u003e\n    \u003cp\u003eCommon pitfalls? Over-tightening distorts the ceramic face—torque to spec for longevity. In colder climates, fairing blocks can streamline flow around the housing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-insights\"\u003e\n    \u003ch2\u003eSeamless Integration with Your Gear\u003c\/h2\u003e\n    \u003cp\u003eDesigned for compatibility with leading marine electronics, this transducer shines in setups running intuitive interfaces. Its exclusive ID tech auto-detects upon power-up, optimizing settings instantly. Whether upgrading an older fishfinder or building a new helm station, expect plug-and-play reliability that saves hours of troubleshooting.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-advice\"\u003e\n    \u003ch2\u003eKeep It Performing Like New\u003c\/h2\u003e\n    \u003cp\u003eLongevity comes from care. After each trip, rinse with fresh water to flush salt. Inspect the face for marine growth—light abrasion cleans it safely. Annually, check cable integrity and hull seal. With proper upkeep, it delivers consistent results season after season.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What hull types is the SS75H best suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's optimized for boats with 8-15 degree deadrise thanks to the 12-degree tilted element, ensuring accurate perpendicular readings to the seabed.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How deep can this transducer detect?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Capable of bottom tracking up to 3,000 meters (10,000 feet), with superior resolution in both shallow and extreme depths.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it measure water temperature?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it includes a built-in temperature sensor for precise surface water readings, vital for locating fish-holding zones.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation DIY-friendly?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—for experienced boat owners. It requires drilling and sealing, but the thru-hull design and long cable simplify the process.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What's the advantage of CHIRP over standard sonar?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"CHIRP sweeps a broad frequency band, providing 5-10x more detail to separate fish arches, bait, and structure clearly.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How much does it protrude from the hull?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Only 5mm, minimizing hydrodynamic drag for better speed and efficiency.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What cable length is included?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"10 meters (33 feet), offering ample length for routing to your display unit.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull types is the SS75H best suited for?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003eIt's optimized for boats with 8-15 degree deadrise thanks to the 12-degree tilted element, ensuring accurate perpendicular readings to the seabed.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow deep can this transducer detect?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003eCapable of bottom tracking up to 3,000 meters (10,000 feet), with superior resolution in both shallow and extreme depths.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it measure water temperature?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003eYes, it includes a built-in temperature sensor for precise surface water readings, vital for locating fish-holding zones.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003eAbsolutely—for experienced boat owners. It requires drilling and sealing, but the thru-hull design and long cable simplify the process.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the advantage of CHIRP over standard sonar?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003eCHIRP sweeps a broad frequency band, providing 5-10x more detail to separate fish arches, bait, and structure clearly.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow much does it protrude from the hull?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003eOnly 5mm, minimizing hydrodynamic drag for better speed and efficiency.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat cable length is included?\u003c\/h3\u003e\n        \u003cp itemprop=\"acceptedAnswer\"\u003e\u003cspan itemprop=\"text\"\u003e10 meters (33 feet), offering ample length for routing to your display unit.\u003c\/span\u003e\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n\u003c\/div\u003e\u003cp\u003ePerfect for smaller boats up to 8 Meter, this stainless steel through hull mounted CHIRP transducer enables bottom detection down to 3,000 Meter with great detail and resolution. This transducer makes it possible to distinguish between individual baitfish, game fish and underwater structures.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013912001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e10000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e130-210 kHz High Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Degree Tilt\/ 8 To 15 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013912001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eCalculates How Deep The Water Is\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTemperature Sensor For Accurate Water Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Range Is 130 Kilohertz To 210 Kilohertz For Good Target Detail In Shallow Water And Excellent Bottom Tracking In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLow Profile Housing Minimizes Drag With Just 5mm Extending Outside Of The Hull\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e12 Degree Tilt Is Ideal For Boats With A 8 Degree To 15 Degree Hull Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013912001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC SS75H Depth\/Temperature Transducer 12° - 9-Pin - 600W - 10M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SS75H is a Stainless Steel, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCHIRP - CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures\u003c\/li\u003e\n\u003cli\u003eDepth\/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings\u003c\/li\u003e\n\u003cli\u003eEasy To Install\u003c\/li\u003e\n\u003cli\u003eHigh Frequency - CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water\u003c\/li\u003e\n\u003cli\u003eHighly Accurate - Provides extremely accurate data.\u003c\/li\u003e\n\u003cli\u003e12° Tilt - The 12° tilt is ideal for boats with a 8° to 15° hull deadrise.\u003c\/li\u003e\n\u003cli\u003eLow Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull.\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Connection - Easily connect to NSSevo3, Lowrance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-empty='\"true\"'\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency: High CHIRP (130-210kHz)\u003c\/li\u003e\n\u003cli\u003ePower Rating: 600W\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor: No\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Yes\u003c\/li\u003e\n\u003cli\u003eMounting Style: Bronze Thru-Hull\u003c\/li\u003e\n\u003cli\u003eElements: 1\u003c\/li\u003e\n\u003cli\u003eBeamwidth @ -3dB: 15° to 9°\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e\"The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings. The 12 tilt is ideal for boats with a 12 to 19 hull deadrise.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-67028\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13912-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162675\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538996605021,"sku":"CWR-67028","price":921.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss75h-depth-1_86cb8006-2268-4502-a6e1-bc6bcb970383.jpg?v=1673111205"},{"product_id":"78140-navico-xsonic-ss75h-depth-temperature-transducer-00","title":"Navico XSONIC SS75H Depth\/Temperature Transducer 0\u0026deg; - 9-Pin - 600W - 10M Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eUpgrade your boating experience with the precision of advanced sonar technology designed for smaller vessels up to 8 meters. This stainless steel thru-hull transducer delivers exceptional clarity, spotting everything from schools of baitfish to rugged underwater structures and maintaining solid bottom lock even at impressive depths. Anglers and navigators alike appreciate its ability to cut through clutter for reliable readings that keep you safe and informed on the water.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy This CHIRP Transducer Stands Out for Everyday Boating\u003c\/h2\u003e\n  \u003cp\u003eHigh-frequency CHIRP sweeps from 130 to 210 kHz strike the perfect balance for shallow-water detail and deep-water tracking. Whether you're trolling for game fish in coastal bays or charting deeper offshore routes, the narrow beam—tapering from 15° to 9°—paints a vivid picture of what's below. Paired with a built-in temperature sensor, it gives you the full environmental snapshot without extra gear, helping you adjust tactics based on water conditions.\u003c\/p\u003e\n  \n  \u003cp\u003eCrafted from durable stainless steel, it withstands harsh marine environments while its low-profile design protrudes just 5mm beyond the hull, reducing drag and preserving your boat's sleek lines. Ideal for hulls with 0° to 7° deadrise (and adaptable up to 14°), installation feels straightforward, blending seamlessly into your setup.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Performance Edges for Real-World Use\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuperior Target Separation:\u003c\/strong\u003e Distinguish bait from trophy fish and structure with 5-10x more resolution than traditional sonar.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDeep Reach:\u003c\/strong\u003e Reliable bottom detection down to 10,000 feet, perfect for versatile cruising.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemp-Integrated Depth:\u003c\/strong\u003e Accurate water depth plus real-time temperature data for smarter fishing and navigation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e 9-pin connector mates effortlessly with compatible chartplotters, minimizing wiring hassles.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower Efficiency:\u003c\/strong\u003e 600W rating handles demanding scans without overwhelming smaller systems.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eStreamlined Installation Tips for Boat Owners\u003c\/h2\u003e\n  \u003cp\u003eSelecting the right spot on your hull—forward of the prop and away from strakes—ensures optimal performance. Drill a clean 75mm hole, bed the unit in marine sealant, and secure with the included nut. The 10-meter cable offers flexibility for routing to your display. Pro tip: Fair the housing to match your deadrise for bubble-free operation, especially in rough seas. Most DIYers complete it in under an hour, but always double-check your boat's layout to avoid interference.\u003c\/p\u003e\n  \n  \u003cp\u003eOnce mounted, calibrate via your head unit for peak sensitivity. It's forgiving on moderate deadrise angles, making it a go-to for trailerable boats, center consoles, and fishing skiffs.\u003c\/p\u003e\n\n  \u003ch2\u003eBoosting Your On-Water Advantage\u003c\/h2\u003e\n  \u003cp\u003eFishermen report game-changing results: tighter arches on individual fish, clearer bottom hardness variations for structure hunting, and consistent performance across speeds. Pair it with medium CHIRP for even broader coverage if your setup allows. Maintenance is minimal—just rinse after saltwater exposure and inspect seals annually. Over time, this investment sharpens your edge, turning casual outings into productive hunts.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat hull types work best with this 0° tilt transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's optimized for flat to moderate deadrise hulls from 0° to 7°, with good results up to 14°. The built-in tilt compensates naturally for deadrise, ensuring strong echo returns.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it measure water temperature accurately?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, the integrated sensor provides precise surface water temperature readings, essential for locating thermoclines and fish-holding zones.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow deep can it reliably track the bottom?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eExpect solid performance down to 10,000 feet, with excellent tracking in deep water thanks to the high-frequency CHIRP range.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for thru-hull mounting?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—requires a standard hole saw, sealant, and basic tools. The low-profile design and long cable make it accessible for most boat owners.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes CHIRP better than fixed-frequency sonar here?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCHIRP delivers broader bandwidth for finer target detail and separation, revealing fish and structure with remarkable clarity over conventional single-frequency units.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWill it work on high-speed boats?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, the streamlined housing cuts drag, maintaining performance at planing speeds while protruding minimally from the hull.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use it for both fishing and navigation?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePerfectly suited for both—precise depth for safe passage and detailed imaging for spotting wrecks, reefs, and fish.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What hull types work best with this 0° tilt transducer?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It's optimized for flat to moderate deadrise hulls from 0° to 7°, with good results up to 14°. The built-in tilt compensates naturally for deadrise, ensuring strong echo returns.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does it measure water temperature accurately?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, the integrated sensor provides precise surface water temperature readings, essential for locating thermoclines and fish-holding zones.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How deep can it reliably track the bottom?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Expect solid performance down to 10,000 feet, with excellent tracking in deep water thanks to the high-frequency CHIRP range.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is installation DIY-friendly for thru-hull mounting?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely—requires a standard hole saw, sealant, and basic tools. The low-profile design and long cable make it accessible for most boat owners.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What makes CHIRP better than fixed-frequency sonar here?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"CHIRP delivers broader bandwidth for finer target detail and separation, revealing fish and structure with remarkable clarity over conventional single-frequency units.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Will it work on high-speed boats?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, the streamlined housing cuts drag, maintaining performance at planing speeds while protruding minimally from the hull.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can I use it for both fishing and navigation?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Perfectly suited for both—precise depth for safe passage and detailed imaging for spotting wrecks, reefs, and fish.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\u003c\/div\u003e\u003cp\u003ePerfect for smaller boats up to 8 Meter, this stainless steel through hull mounted CHIRP transducer enables bottom detection down to 3,000 Meter with great detail and resolution. This transducer makes it possible to distinguish between individual baitfish, game fish and underwater structures.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013911001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e10000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e130-210 kHz High Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 Degree Tilt\/ 0 To 7 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013911001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eCalculates How Deep The Water Is\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTemperature Sensor For Accurate Water Temperature Readings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRP Range Is 130 Kilohertz To 210 Kilohertz For Good Target Detail In Shallow Water And Excellent Bottom Tracking In Deep Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLow Profile Housing Minimizes Drag With Just 5mm Extending Outside Of The Hull\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e0 Degree Tilt Is Ideal For Boats With A 0 Degree To 14 Degree Hull Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013911001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC SS75H Depth\/Temperature Transducer 0° - 9-Pin - 600W - 10M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SS75H is a Stainless Steel, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCHIRP - CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures\u003c\/li\u003e\n\u003cli\u003eDepth\/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings\u003c\/li\u003e\n\u003cli\u003eEasy To Install\u003c\/li\u003e\n\u003cli\u003eHigh Frequency - CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water\u003c\/li\u003e\n\u003cli\u003eHighly Accurate - Provides extremely accurate data.\u003c\/li\u003e\n\u003cli\u003e0° Tilt - The 0° tilt is ideal for boats with a 0° to 7° hull deadrise.\u003c\/li\u003e\n\u003cli\u003eLow Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull.\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Connection - Easily connect to NSSevo3, Lowrance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency: High CHIRP (130-210kHz)\u003c\/li\u003e\n\u003cli\u003ePower Rating: 600W\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor: No\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Yes\u003c\/li\u003e\n\u003cli\u003eMounting Style: Thru-Hull\u003c\/li\u003e\n\u003cli\u003eElements: 1\u003c\/li\u003e\n\u003cli\u003eBeamwidth @ -3dB: 15° to 9°\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSimrad XSonic SS75H rp through the hull 9-pin 0-degree tilting element Model: 000-13911-001 depth and temperature high frequency 130-210 khz600 high-performance stainless steel...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-67029\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13911-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162668\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32538996703325,"sku":"67029","price":644.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss75h-depth-1_b73e9892-37b4-4f31-ba52-f1d3a650f9ad.jpg?v=1673111211"},{"product_id":"78629-navico-xsonic-tm185hw-wide-beam-chirp-tramsom-mount","title":"Navico XSONIC TM185HW Wide-Beam Chirp Tramsom Mount Transducer - 9-Pin","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"transducer-overview\"\u003e\n    \u003ch2\u003eUnlock Superior Fishfinding with Wide-Beam CHIRP Technology\u003c\/h2\u003e\n    \u003cp\u003eImagine scanning a broader swath beneath your boat, spotting schools of fish that narrower beams might miss entirely. The TM185HW stands out in the world of marine electronics by delivering exactly that—twice the coverage compared to standard high-frequency CHIRP transducers. Its innovative design maintains a consistent 25-degree beamwidth across the full 150-250 kHz high-frequency spectrum, ensuring crisp, detailed returns from the upper water column right down to the bottom. Whether you're chasing trophy bass in shallow bays or tracking pelagic species offshore, this transducer transforms your sonar display into a vivid map of underwater activity.\u003c\/p\u003e\n    \u003cp\u003eCrafted for reliability on boats from 8 to 12 meters, it thrives on outboards and inboards with fiberglass, wood, or metal hulls sporting 2 to 20 degrees of deadrise. The urethane housing shrugs off harsh marine environments, while the stainless steel bracket guarantees a rock-solid transom mount.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features-benefits\"\u003e\n    \u003ch2\u003eCore Features That Drive Real-World Performance\u003c\/h2\u003e\n    \u003ch3\u003eHigh-Frequency CHIRP Excellence\u003c\/h3\u003e\n    \u003cp\u003eCHIRP technology sweeps continuously across frequencies, painting a sharper picture than fixed-frequency sonar. At 150-250 kHz with 1 kW power, the TM185HW excels in shallow to mid-depths, where its wide beam uncovers fish-holding structures and bait balls that slip past conventional setups. Anglers report larger, more defined echoes, making target separation effortless even in cluttered waters.\u003c\/p\u003e\n\n    \u003ch3\u003eIntegrated Depth and Temperature Sensing\u003c\/h3\u003e\n    \u003cp\u003eBeyond depth tracking, the fast-response temperature sensor helps you pinpoint thermoclines—those hidden layers where fish congregate. This dual functionality means fewer guesses and more informed decisions on lure choice and trolling speeds.\u003c\/p\u003e\n\n    \u003ch3\u003eBuilt to Last and Easy to Deploy\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eRugged urethane acoustic window and housing for durability against impacts and corrosion.\u003c\/li\u003e\n      \u003cli\u003eStainless steel bracket for secure, vibration-resistant installation.\u003c\/li\u003e\n      \u003cli\u003eLightweight at just 1.1 lbs (0.45 kg), simplifying handling during setup.\u003c\/li\u003e\n      \u003cli\u003e9-pin connector for seamless integration with compatible chartplotters.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-compatibility\"\u003e\n    \u003ch2\u003eEffortless Installation and Versatile Compatibility\u003c\/h2\u003e\n    \u003cp\u003eSetting up the TM185HW is straightforward for weekend warriors and pros alike. Its transom-mount design bolts onto existing brackets from popular models like TM258, TM260, TM265, or TM275, saving time and hassle on upgrades. Adjust for your hull's deadrise angle up to 20 degrees, and you're scanning in minutes. Pair it with CHIRP-enabled sounders for peak performance, and enjoy peace of mind backed by a solid two-year warranty.\u003c\/p\u003e\n    \u003cp\u003eThis transducer shines on planing hulls, where its wide coverage maximizes every pass over structure-rich bottoms. Skip the steep learning curve—clear instructions and forgiving design make it a go-to for repowering older systems or outfitting new rigs.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-advantages\"\u003e\n    \u003ch2\u003eWhy Wide-Beam Outperforms Narrow in Everyday Fishing\u003c\/h2\u003e\n    \u003cp\u003eNarrow-beam transducers focus tightly for deep-water precision, but they leave gaps in coverage. The TM185HW's constant 25-degree beam fills those voids, ideal for flats fishing, river runs, or coastal bays under 300 feet. Fishermen love how it reveals fish hugging the bottom edges or suspended mid-water, boosting hookups without endless circling. In tests, users note enhanced target resolution that rivals higher-end units, all while keeping your display uncluttered and intuitive.\u003c\/p\u003e\n    \u003cblockquote\u003e\"Switched to this wide-beam beast and immediately doubled my screen real estate—fish that vanished before now pop like fireworks.\" – Seasoned offshore guide\u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat frequency range does the TM185HW cover?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt operates across a high-frequency CHIRP band of 150-250 kHz, providing versatile scanning for various depths and conditions.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat is the beam angle of this transducer?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eA constant 25-degree beamwidth across the entire frequency range ensures wide, consistent coverage under your boat.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat hull types and deadrise angles is it compatible with?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSuitable for fiberglass, wood, or metal hulls with 2 to 20 degrees of deadrise on outboards and I\/O boats sized 8-12 meters.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it include temperature sensing?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it features a fast-response water-temperature sensor alongside depth capabilities for comprehensive data.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it retrofit to older transducer brackets?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—it fits existing TM258, TM260, TM265, and TM275 brackets for easy upgrades.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat power rating does the TM185HW have?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eRated at 1 kW, it delivers strong signal output for reliable performance in demanding environments.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow much does it weigh?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eWeighs just 0.45 kg (1.1 lb), making it lightweight and easy to install without extra strain on your transom.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eXSonic Airmar TM185 HW TM185HW Wide Beam - CHIRPS across the following bandwidths: High-Frequency: 150 to 250 Kilohertz, 25 Degree Constant Beamwidth: Depth and fast-response water-temperature sensor. Urethane housing and stainless steel mounting bracket. Boat Size: 8 Meter to 12 Meter - Boat Type: Outboards and I\/O - Hull Type: Fiberglass, Wood, Metal -Can retrofit to existing TM258, TM260, TM265, and TM275 bracket.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013997001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e150-250 kHz High Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e25 Degree Beam Angle\/ 2 To 20 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013997001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eDepth And Fast-Response Water-Temperature Sensor\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eUrethane Housing And Stainless Steel Mounting Bracket\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Frequency: 150 To 250 Kilohertz, 25 Degree Constant Beamwidth\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013997001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC TM185HW Wide-Beam Chirp Tramsom Mount Transducer - 9-Pin\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGet more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers\u003c\/p\u003e\u003cp\u003eA unique property of the new high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDepth \u0026amp; temperature\u003c\/li\u003e\n\u003cli\u003e150-250 kHz H frequency\u003c\/li\u003e\n\u003cli\u003eUrethane Housing\u003c\/li\u003e\n\u003cli\u003e1 kW\u003c\/li\u003e\n\u003cli\u003eWide 25° beam\u003c\/li\u003e\n\u003cli\u003eWeight: 0.45 kg (1.1 lb)\u003c\/li\u003e\n\u003cli\u003eHull Deadrise: 2° to 20°\u003c\/li\u003e\n\u003cli\u003eAcoustic Window: Urethane\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eWith Airmar's new wide-beam Chirp product line, you can get greater coverage under the boat. These transducers can provide a high frequency range of 150-250 kHz and a constant beam width of 25°, thus...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-67518\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13997-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024165911\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32539198586973,"sku":"CWR-67518","price":1559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-tm185hw-wide-1.jpg?v=1673113531"},{"product_id":"79955-navico-xsonic-b150m-120-th-9-pin-connector","title":"Navico XSONIC B150M 12\u0026deg; TH 9-Pin Connector w\/10M Cable","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eDiscover the power of precise underwater detection with the XSONIC B150M, a bronze thru-hull transducer engineered for anglers chasing fish in coastal waters, inshore spots, and even freshwater haunts. This medium-frequency CHIRP model strikes the perfect balance, delivering deep penetration without sacrificing sharp target separation. Whether you're tracking structure-hugging bass or suspended schools in murky bays, it paints a clearer picture of what's below, helping you hook more fish on every outing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy Choose the B150M for Your Next Fishing Adventure?\u003c\/h2\u003e\n    \u003cp\u003eUnlike traditional fixed-frequency sonars that can miss fine details, this transducer sweeps across a wide bandwidth to reveal bait balls, bottom contours, and individual fish with stunning clarity. Its 12-degree tilted element aligns seamlessly with your hull's deadrise, ensuring optimal signal transmission even at speed. Boat owners rave about its ability to maintain solid bottom lock while planing, making it a game-changer for trolling or drifting.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eExcels in shallow to medium depths, spotting fish near wrecks, reefs, or weed lines\u003c\/li\u003e\n      \u003cli\u003eProvides wider coverage with beam widths tapering from 26 degrees at higher frequencies to 17 degrees at lower ones\u003c\/li\u003e\n      \u003cli\u003eFast-response temperature sensor helps you monitor thermoclines and locate active water columns\u003c\/li\u003e\n      \u003cli\u003eLow-profile bronze housing withstands rough conditions and resists marine growth\u003c\/li\u003e\n      \u003cli\u003eBoosts confidence with reliable performance across fiberglass, wood, or metal hulls up to 8 meters\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"technical-insights\"\u003e\n    \u003ch2\u003eDeep Dive into Performance Specs\u003c\/h2\u003e\n    \u003cp\u003eCrafted for compatibility with modern multifunction displays, this 9-pin connector model packs 300 watts of power into a compact design. Operating in the 95-155 kHz medium CHIRP range, it covers up to 2500 feet depending on water clarity and targets—ideal for everything from offshore ledges to inland lakes. The included 33-foot cable gives you flexible routing options during installation, minimizing signal loss.\u003c\/p\u003e\n    \u003ctable role=\"presentation\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eAttribute\u003c\/th\u003e\n          \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMount Type\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eThru-Hull with 12° Tilt\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFrequency\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e95-155 kHz (Medium CHIRP)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePower\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e300W\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMax Depth\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 2500 ft*\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCable\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10m (33 ft)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSensors\u003c\/td\u003e\n          \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eDepth \u0026amp; Temperature\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003cp style=\"font-style: italic; margin-top: 10px;\"\u003e*Performance varies with conditions and fish size.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003ePro Tips for Seamless Installation and Maintenance\u003c\/h2\u003e\n    \u003cp\u003eInstalling a thru-hull like the B150M doesn't have to be a hassle. Start by selecting a spot forward of the prop and keel, at least 1\/3 of the hull length from the stern for clean water flow. Fair the housing with marine sealant for a hydrodynamic fit, and route the cable away from engines or bilge pumps to avoid interference. Once in, calibrate your display for CHIRP mode to unlock full potential.\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eClean the hull interior and exterior thoroughly\u003c\/li\u003e\n      \u003cli\u003eDrill a 2-inch hole and bed the transducer in polyurethane sealant\u003c\/li\u003e\n      \u003cli\u003eSecure with the included nut, avoiding over-tightening\u003c\/li\u003e\n      \u003cli\u003eTest at dockside before heading out\u003c\/li\u003e\n      \u003cli\u003eRegularly inspect for fouling and clean with a soft brush\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eFor best results in saltwater, apply anti-fouling paint around the exterior, leaving the active face bare.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-use\"\u003e\n    \u003ch2\u003eReal-World Wins: How Anglers Maximize the B150M\u003c\/h2\u003e\n    \u003cp\u003eFreshwater pros use its crisp separation to pick out crappie near docks or walleye off points. Coastal captains rely on it for flounder in sandy bottoms or redfish ambushing shrimp. Pair it with high-definition sonar overlays to create custom contour maps, turning your boat into a fish-finding machine. Users often note fewer false readings in choppy seas compared to narrower high-frequency options.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat frequency range does the XSONIC B150M transducer cover?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt operates in the medium CHIRP range of 95-155 kHz, offering 60 kHz of bandwidth for versatile depth and resolution.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs the B150M suitable for metal hulls?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, its bronze construction works well on fiberglass, wood, and metal hulls, providing reliable performance across various boat types.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes this transducer include a water temperature sensor?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely, it features a fast-response temperature sensor alongside depth capabilities, perfect for tracking water conditions.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat beam widths can I expect from the B150M?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eBeam width varies from 26 degrees at 95 kHz to 17 degrees at 155 kHz, giving broader coverage in deeper water and tighter focus in shallows.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does the 12-degree tilt benefit installation?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eThe tilt matches common hull deadrise angles, ensuring the ceramic faces straight down for maximum signal strength without additional shimming.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the maximum depth rating for this model?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt reliably performs up to 2500 feet in ideal conditions, though actual range depends on water clarity and target strength.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan the B150M handle higher boat speeds?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it tracks the bottom effectively at planing speeds, making it great for trolling or searching large areas quickly.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe B150M is a bronze, thru-hull CHIRP transducer, ideal for sport fishing and commercial vessels up to 8 Meter in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013921001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e2500 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e300 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e95-155 kHz Medium Frequency CHIRP Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Degree Tilt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013921001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Inshore Or Coastal Fishing In Shallow To Medium Depths\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCHIRPs From 95 To 155 Kilohertz To Provide 60 Kilohertz Of Total Bandwidth From One Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBlack 9 Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013921001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC B150M 12° TH 9-Pin Connector with 10M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs CHIRP continues to redefine recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The B150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.\u003c\/p\u003e\u003cp\u003e*Depths vary depending on target strength and sea conditions\u003c\/p\u003e\u003cp\u003eA tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS across the following bandwidth: M Model - Medium Frequency 95-155 kHz\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDepth and water temperature sensor\u003c\/li\u003e\n\u003cli\u003e300W\u003c\/li\u003e\n\u003cli\u003eBronze Thru Hull\u003c\/li\u003e\n\u003cli\u003e12° tilt\u003c\/li\u003e\n\u003cli\u003eIdeal for inshore or coastal fishing in shallow to medium depths\u003c\/li\u003e\n\u003cli\u003eFreshwater anglers will see fish holding close to structures and suspended fish\u003c\/li\u003e\n\u003cli\u003eTrack bottom at higher boat speeds\u003c\/li\u003e\n\u003cli\u003eMore coverage under your boat delivers wider archesand 26° to 17° beamwidths\u003c\/li\u003e\n\u003cli\u003eCover the medium frequency range-CHIRPS from 95-155kHz to provide 60kHz of total bandwidth from one transducer\u003c\/li\u003e\n\u003cli\u003eHull Type: Fiberglass, wood\u003c\/li\u003e\n\u003cli\u003e1 internal ceramic\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003esim-000-13921-001 mpn: sim-000-13921-001 upc: 9420024162767 depth sensor XSonic B150M MFG 000-13920-001 bronze thin W 12 degree tilt chi medium 80-130 khz...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-68844\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13921-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024162767\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32539425734749,"sku":"CWR-68844","price":467.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-b150m-120-1.jpg?v=1673116410"},{"product_id":"79956-navico-xsonic-p79-adjustable-200-50khz-plastic-in-hull","title":"Navico XSONIC P79 Adjustable 200\/50kHz Plastic In-Hull Transducer - 9-Pin","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eDiscover Superior Depth Performance with the P79 In-Hull Transducer\u003c\/h2\u003e\n    \u003cp\u003eBoat owners seeking reliable depth readings without compromising hull integrity often turn to in-hull transducers like the P79. This adjustable plastic sensor excels in planing hull powerboats, trailered vessels, rigid inflatable boats (RIBs), and even racing sailboats. Its clever design eliminates the need for through-hull drilling in many setups, reducing labor and potential leak risks while delivering crisp sonar data across inshore waters.\u003c\/p\u003e\n    \u003cp\u003eWhat sets it apart is the innovative liquid-filled base that optimizes sound wave transmission. By bonding securely to the hull interior and allowing the transducer pod to twist-lock in place, it ensures the beam points straight down—crucial for accurate bottom tracking on vessels with varying deadrise angles up to 22 degrees. Anglers, cruisers, and racers alike appreciate how it handles choppy conditions without protrusions that could snag lines or damage the hull.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Technical Specs for Marine Enthusiasts\u003c\/h2\u003e\n    \u003cp\u003eDive into the specs that make this 600-watt powerhouse a go-to for dual-frequency operation:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFrequencies:\u003c\/strong\u003e 50 kHz for wide-area coverage (45-degree beam) and 200 kHz for detailed close-range views (12-degree beam)\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDepth Capability:\u003c\/strong\u003e Reliable readings from shallow flats up to 1,200 feet, perfect for coastal explorations\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHull Compatibility:\u003c\/strong\u003e Solid fiberglass up to 5\/8-inch thick; adheres to aluminum hulls under 0.16 inches; skips cored bottoms to avoid signal distortion\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDeadrise Adjustment:\u003c\/strong\u003e Fine-tunes from 2 to 22 degrees, matching most outboard motorboats and sporty hulls\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 33-foot length provides flexible routing to your chartplotter or fishfinder\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Standard 9-pin for seamless integration with popular marine electronics\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese attributes translate to fewer false readings and stronger signal returns, even as speeds climb during planing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation and Hull-Friendly Design\u003c\/h2\u003e\n    \u003cp\u003eInstalling an in-hull transducer shouldn't feel like a shipyard overhaul. The P79 simplifies the process: clean the mounting spot inside the hull, apply the base with included adhesive, fill with the provided liquid, then secure the pod. No external holes mean less worry about warranties or structural integrity. It's especially forgiving on trailered boats where frequent launches demand durability.\u003c\/p\u003e\n    \u003cp\u003ePro tip from seasoned installers: Position it forward of prop wash and away from strakes for the cleanest pulse. Test in a few inches of water post-install to verify vertical alignment—adjust if needed for peak performance. This setup shines on outboard-powered rigs, where space is tight and aesthetics matter.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Performance Across Boating Scenarios\u003c\/h2\u003e\n    \u003cp\u003eIn practice, the P79's dual beams adapt to your needs. Use the wider 50 kHz for scouting drop-offs or navigating murky bays, switching to 200 kHz when targeting structure or schools of fish hugging the bottom. Powerboat captains report consistent depth locks at 30+ knots, while sail racers value its low-profile mount that won't foul spinnaker sheets.\u003c\/p\u003e\n    \u003cp\u003eCompared to puck-style alternatives, the liquid coupling minimizes air bubble interference, yielding sharper fish arches and bottom detail. It's a smart upgrade for boats transitioning from portable sounders to fixed sonar systems, offering pro-level insight without the fuss.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eLong-Term Reliability and Maintenance Essentials\u003c\/h2\u003e\n    \u003cp\u003eBuilt tough from marine-grade plastic, this transducer withstands UV exposure and vibration. Routine checks involve inspecting the liquid fill for leaks and wiping the pod clean after saltwater sessions. Avoid high-pressure washes near the seal to preserve adhesion. With proper care, it delivers years of trouble-free service, making it a staple for weekend warriors and serious offshore adventurers alike.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What types of boats is the P79 transducer best suited for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's ideal for planing-hull powerboats with outboards, trailered boats, RIBs, and racing sailboats featuring solid fiberglass or thin aluminum hulls.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the P79 require drilling holes in the hull?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, it's a true in-hull mount—no external holes needed. The base bonds inside the hull for a clean, leak-free setup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull thicknesses does it support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Recommended for solid fiberglass hulls up to 5\/8 inch thick. It adheres to aluminum under 0.16 inches but not cored hulls.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it adjust to my boat's deadrise angle?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it adjusts from 2 to 22 degrees, ensuring the sonar beam points vertically for accurate depth readings.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What depth range and frequencies does it offer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Provides 800-1,200 feet of depth capability with dual 50\/200 kHz frequencies: 45-degree beam at 50 kHz for coverage, 12 degrees at 200 kHz for detail.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is it compatible with my Simrad or Lowrance unit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The 9-pin connector pairs directly with many Simrad, Lowrance, and compatible Navico chartplotters and fishfinders.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I maintain the liquid-filled base?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Periodically check for leaks and top off if needed. Rinse with fresh water after saltwater use to prevent corrosion.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003c!-- FAQs rendered as accordion or list for UX; schema handles SEO --\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat types of boats is the P79 transducer best suited for?\u003c\/summary\u003e\n        \u003cp\u003eIt's ideal for planing-hull powerboats with outboards, trailered boats, RIBs, and racing sailboats featuring solid fiberglass or thin aluminum hulls.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes the P79 require drilling holes in the hull?\u003c\/summary\u003e\n        \u003cp\u003eNo, it's a true in-hull mount—no external holes needed. The base bonds inside the hull for a clean, leak-free setup.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat hull thicknesses does it support?\u003c\/summary\u003e\n        \u003cp\u003eRecommended for solid fiberglass hulls up to 5\/8 inch thick. It adheres to aluminum under 0.16 inches but not cored hulls.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan it adjust to my boat's deadrise angle?\u003c\/summary\u003e\n        \u003cp\u003eYes, it adjusts from 2 to 22 degrees, ensuring the sonar beam points vertically for accurate depth readings.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat depth range and frequencies does it offer?\u003c\/summary\u003e\n        \u003cp\u003eProvides 800-1,200 feet of depth capability with dual 50\/200 kHz frequencies: 45-degree beam at 50 kHz for coverage, 12 degrees at 200 kHz for detail.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs it compatible with my Simrad or Lowrance unit?\u003c\/summary\u003e\n        \u003cp\u003eThe 9-pin connector pairs directly with many Simrad, Lowrance, and compatible Navico chartplotters and fishfinders.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I maintain the liquid-filled base?\u003c\/summary\u003e\n        \u003cp\u003ePeriodically check for leaks and top off if needed. Rinse with fresh water after saltwater use to prevent corrosion.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe P79 is a plastic, in-hull dual-frequency, depth sensor. Easy to install and accommodating deadrise angles up to 22 Degree, it is ideal for inshore use on motorboats with outboard engines, small racing yachts and RIBs.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013942001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eIn-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e800 To 1200 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e50\/200 kHz Dual Frequency Depth Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e45 To 12 Degree\/ 2 To 20 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e33 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013942001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eConstructed From Plastic\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eIn-Hull Dual-Frequency, Depth Sensor\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eIdeal For Inshore Use On Motorboats With Outboard Engines, Small Racing Yachts And RIBs\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013942001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC P79 Adjustable 200\/50kHz Plastic In-Hull Transducer - 9-Pin\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.\u003cbr\u003e\u003cbr\u003eThe 9-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.\u003cbr\u003e\u003cbr\u003eTransducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.\u003cbr\u003e\u003cbr\u003e*Fiberglass should be no more than 5\/8\" thick\u003c\/p\u003e\u003cp\u003e*Not recommended for cored hulls\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eThe P79 inboard sensor can be easily adjusted to the dead angle of the hull, up to 22 o. This ensures that the beam is oriented vertically to receive the echo, so as to obtain an accurate depth...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-68845\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13942-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024163320\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32539425996893,"sku":"CWR-68845","price":207.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-p79-adjustable-1.jpg?v=1673116415"},{"product_id":"89397-navico-cruise-hook2-83-200-skimmer-transom-mount-transducer","title":"Navico Cruise\/Hook2 83\/200 Skimmer Transom Mount Transducer","description":"\u003csection class=\"product-description\"\u003e\n    \u003ch2\u003eEnhance Your Fishing Experience with the Cruise\/Hook\u003csup\u003e2\u003c\/sup\u003e 83\/200 Skimmer Transducer\u003c\/h2\u003e\n    \u003cp\u003eWhether you're chasing trophy bass in shallow waters or scanning deep offshore for structure, the right transducer makes all the difference. This skimmer-style transom mount transducer, designed specifically for Navico's Cruise and Hook\u003csup\u003e2\u003c\/sup\u003e series fishfinders, delivers reliable dual-frequency performance at 83\/200 kHz. Its robust build and easy installation ensure crystal-clear sonar images right from your boat's transom, helping you spot fish, wrecks, and contours with precision.\u003c\/p\u003e\n    \n    \u003ch3\u003eKey Features That Set It Apart\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eDual 83\/200 kHz Frequencies:\u003c\/strong\u003e The 83 kHz cone offers wide-area coverage for locating fish schools quickly, while 200 kHz provides high-definition detail at higher boat speeds—perfect for trolling or cruising.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSkimmer Design:\u003c\/strong\u003e Low-profile housing minimizes drag and water turbulence, keeping your readings accurate even in rough conditions.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTransom Mount Simplicity:\u003c\/strong\u003e Mounts securely to most hulls with included hardware, positioning the ceramic element just below the waterline for optimal performance.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e19.5-Foot Cable with 9-Pin Connector:\u003c\/strong\u003e Plenty of length for clean routing to your display unit, plug-and-play compatibility without adapters.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eDepth Capabilities:\u003c\/strong\u003e Reliable down to hundreds of feet, depending on your fishfinder model and water conditions.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch3\u003eWhy Boaters Trust This Transducer for Cruise and Hook\u003csup\u003e2\u003c\/sup\u003e Units\u003c\/h3\u003e\n    \u003cp\u003eNavico engineered this transducer to pair seamlessly with entry-level yet powerful fishfinders like the Hook\u003csup\u003e2\u003c\/sup\u003e series from Lowrance and Cruise models from Simrad. It's not just about basic depth soundings—users report sharper fish arches, better bottom separation, and fewer dropouts compared to generic alternatives. The plastic housing withstands UV exposure, saltwater corrosion, and impacts from trailering, making it a long-term investment for weekend warriors and guides alike.\u003c\/p\u003e\n    \n    \u003cp\u003eImagine idling over a suspected honey hole: the wide 83 kHz beam sweeps a broad path, marking baitfish clusters, then switch to 200 kHz for pinpoint targeting. It's this versatility that keeps anglers coming back, season after season.\u003c\/p\u003e\n    \n    \u003ch3\u003eEffortless Installation Guide\u003c\/h3\u003e\n    \u003cp\u003eInstalling this transducer is straightforward, even for DIYers. Here's a step-by-step approach based on real-world setups:\u003c\/p\u003e\n    \u003col\u003e\n        \u003cli\u003eClean and sand the transom area for a strong bond.\u003c\/li\u003e\n        \u003cli\u003eSelect a spot 1\/3 from the stern, deadrise-matched for your hull.\u003c\/li\u003e\n        \u003cli\u003eDrill pilot holes, secure with stainless screws, and apply marine sealant.\u003c\/li\u003e\n        \u003cli\u003eRoute the cable through the hull or along gunwales, avoiding heat sources and sharp edges.\u003c\/li\u003e\n        \u003cli\u003eTest at varying speeds to fine-tune angle—aim for a slight downward tilt.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Bracket-mount it first for adjustments before permanent install. Most setups take under an hour.\u003c\/p\u003e\n    \n    \u003ch3\u003eCompatibility and Performance Tips\u003c\/h3\u003e\n    \u003cp\u003eTailored for Cruise and Hook\u003csup\u003e2\u003c\/sup\u003e displays, it shines on deadrise angles from flat to 20 degrees. For best results, calibrate your unit's sensitivity and pair with CHIRP-enabled models if available. Maintain it by rinsing after saltwater use and inspecting the face for marine growth—keeps readings crisp year-round.\u003c\/p\u003e\n    \n    \u003cp\u003eAvoid common pitfalls like mounting too high (loses bottom lock) or near strakes (causes interference). With proper setup, expect consistent performance across freshwater lakes, rivers, and coastal bays.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat frequencies does the Cruise\/Hook\u003csup\u003e2\u003c\/sup\u003e 83\/200 skimmer transducer support?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt operates on dual frequencies: 83 kHz for wide coverage and 200 kHz for detailed, high-speed imaging, optimizing your sonar for various fishing scenarios.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eIs this transducer compatible with all Hook\u003csup\u003e2\u003c\/sup\u003e models?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, it's designed specifically for Hook\u003csup\u003e2\u003c\/sup\u003e series and Cruise units with a 9-pin connector, ensuring plug-and-play operation.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow do I mount the skimmer transducer on my boat?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eMount it on the transom, about one-third from the stern, with a slight downward angle. Use the included hardware and marine sealant for a secure, watertight fit.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat's the cable length on this transom mount transducer?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt comes with a 19.5-foot cable, providing ample length for routing to your fishfinder display without extensions.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eCan this transducer handle saltwater use?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eAbsolutely—its durable plastic housing resists corrosion. Rinse it after use to prevent buildup and extend its life.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eDoes it work well at high speeds?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, the 200 kHz frequency excels at planing speeds, maintaining clear bottom tracking and fish detection.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat's the difference between skimmer and through-hull transducers?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eSkimmer transoms are easier to install externally and suit most trailered boats, while through-hulls offer superior performance on larger vessels but require hull drilling.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [{\n            \"@type\": \"Question\",\n            \"name\": \"What frequencies does the Cruise\/Hook2 83\/200 skimmer transducer support?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It operates on dual frequencies: 83 kHz for wide coverage and 200 kHz for detailed, high-speed imaging, optimizing your sonar for various fishing scenarios.\"\n            }\n        }, {\n            \"@type\": \"Question\",\n            \"name\": \"Is this transducer compatible with all Hook2 models?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, it's designed specifically for Hook2 series and Cruise units with a 9-pin connector, ensuring plug-and-play operation.\"\n            }\n        }, {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount the skimmer transducer on my boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Mount it on the transom, about one-third from the stern, with a slight downward angle. Use the included hardware and marine sealant for a secure, watertight fit.\"\n            }\n        }, {\n            \"@type\": \"Question\",\n            \"name\": \"What's the cable length on this transom mount transducer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It comes with a 19.5-foot cable, providing ample length for routing to your fishfinder display without extensions.\"\n            }\n        }, {\n            \"@type\": \"Question\",\n            \"name\": \"Can this transducer handle saltwater use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Absolutely—its durable plastic housing resists corrosion. Rinse it after use to prevent buildup and extend its life.\"\n            }\n        }, {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work well at high speeds?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, the 200 kHz frequency excels at planing speeds, maintaining clear bottom tracking and fish detection.\"\n            }\n        }, {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between skimmer and through-hull transducers?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Skimmer transoms are easier to install externally and suit most trailered boats, while through-hulls offer superior performance on larger vessels but require hull drilling.\"\n            }\n        }]\n    }\n    \u003c\/script\u003e\n\u003c\/section\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0015053001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0015053001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eCruise\/Hook\u003csup\u003e2 \u003c\/sup\u003e83\/200 Skimmer Transom Mount Transducer with 19.5 cable.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e83\/200\u003c\/li\u003e\n\u003cli\u003eSkimmer\u003c\/li\u003e\n\u003cli\u003eTransom Mount \u003c\/li\u003e\n\u003cli\u003eSpecifically for Cruise Series and Hook\u003csup\u003e2\u003c\/sup\u003e Series\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eWe strive to provide new and innovative products to meet the needs of the rapidly changing world in our lives. Our goal is to provide products made with the highest quality materials and quality materials.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-78286\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-15053-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420064105076\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32539610382429,"sku":"CWR-78286","price":51.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-cruise-hook2-83-1.jpg?v=1673119792"},{"product_id":"83679-navico-xsonic-r509lh-w-thru-hull-wide-beam-chirp-w-fairing","title":"Navico XSONIC R509LH-W Thru-Hull Wide-Beam CHIRP w\/Fairing Block","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eImagine scanning vast expanses of water beneath your vessel, spotting schools of baitfish drawing in trophy game, and revealing hidden structures with crystal-clear detail—all without missing a beat on your next offshore adventure. The XSONIC R509LH-W thru-hull wide-beam CHIRP transducer transforms your sonar display into a window of unparalleled underwater intelligence, blending cutting-edge broadband technology with a generous coverage footprint that narrow-beam options simply can't match.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Wide-Beam CHIRP Changes the Game for Serious Anglers\u003c\/h2\u003e\n  \u003cp\u003eTraditional transducers often leave gaps in coverage, especially in shallow to mid-depths where fish lurk near the surface or scatter across wide areas. This wide-beam powerhouse sweeps a consistent 25-degree angle across its high-frequency band, doubling the search area under your boat compared to standard high-frequency CHIRP units. The result? Larger, sharper returns on screen, making it easier to distinguish bait from predators, track fish hugging the bottom, and navigate complex seabeds teeming with structure.\u003c\/p\u003e\n  \n  \u003cp\u003ePair it with modern sounder modules, and you'll punch through noise at speed, maintaining accuracy down to impressive depths. Whether you're trolling for pelagics in deep blue water or bottom bouncing over reefs, this transducer delivers the separation and resolution that turns good trips into legendary hauls.\u003c\/p\u003e\n\n  \u003ch2\u003eSuperior Performance Across Demanding Conditions\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExceptional Target Separation:\u003c\/strong\u003e Pinpoint individual fish amid tight schools, even in cluttered waters.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBottom Composition Insights:\u003c\/strong\u003e Differentiate hard rock from soft mud, spotting fish that blend seamlessly with the seafloor.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Reliability:\u003c\/strong\u003e Holds strong returns while planing or running, ideal for chasing fast-moving species.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDeep-Water Prowess:\u003c\/strong\u003e Reliable soundings in excess of 3,000 meters, perfect for bluewater explorers.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnhanced Upper Water Column Views:\u003c\/strong\u003e Catch surface runners and mid-water suspenders that slip past conventional beams.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTechnical Edge for Seamless Integration\u003c\/h2\u003e\n  \u003cp\u003eCrafted with 25 internal broadband ceramics, an epoxy housing, and a high-performance fairing block, it's built to handle the rigors of saltwater exposure. The dual-band CHIRP operation—low frequencies from 28 to 60 kHz for deep penetration, high from 150 to 250 kHz for fine detail—ensures versatility across hull types like fiberglass, wood, or metal. Suited for vessels up to 40 feet with deadrise angles from 0 to 25 degrees, it includes a fast-response temperature sensor for real-time water data.\u003c\/p\u003e\n  \n  \u003cp\u003eIts exclusive identification tech simplifies setup, while the stuffing tube and fairing optimize water flow for minimal turbulence. Anglers retrofitting from similar installations appreciate the straightforward compatibility, keeping downtime minimal.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Applications: From Reef Hunting to Open Ocean\u003c\/h2\u003e\n  \u003cp\u003ePicture this: You're drifting over a distant wreck, and the wide beam illuminates not just the structure but the swirling bait balls and lurking predators encircling it. Or, while running the troll lines, constant wide coverage flags opportunistic strikes off to the sides. Saltwater captains rave about its ability to \"see through\" thermoclines and debris, providing confidence in unfamiliar grounds. For tournament pros, the crisp imaging means faster decisions—mark the fish, deploy the bait, and hook up.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation and Maintenance Insights\u003c\/h2\u003e\n  \u003cp\u003eThru-hull mounting positions the elements optimally for clean signals, away from hull wakes. Select a spot forward of props and keels, ensuring fairing alignment matches your hull's deadrise for peak performance. Post-install, a simple freshwater rinse after each outing wards off marine growth, preserving acoustic clarity season after season. Regular checks on cable integrity and fairing security keep it performing like new.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Specifications at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; margin: 1em 0;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n        \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #ddd;\"\u003eAttribute\u003c\/th\u003e\n        \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #ddd;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eFrequency Bands\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eLow: 28-60 kHz | High: 150-250 kHz\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eBeam Width\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eConstant 25° (high frequency)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eMax Depth\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eUp to 10,000 feet\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eHull Deadrise\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e0° to 25°\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eWeight\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e20.8 kg (46 lb)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eBoat Size\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eUp to 12 m (40 ft)\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What makes the wide-beam design of this CHIRP transducer special?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"The constant 25-degree beam width across the high-frequency range doubles coverage under the boat, revealing more fish and structure with larger, crisper sonar returns compared to narrow-beam models.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can this transducer handle deep offshore fishing?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it excels with depth capabilities up to 10,000 feet and low-frequency CHIRP for penetration, ideal for bluewater pursuits while maintaining detail via high-frequency scanning.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What hull types is it compatible with?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Designed for fiberglass, wood, or metal hulls with deadrise angles from 0 to 25 degrees, making it versatile for most recreational and mid-sized sportfishing boats up to 40 feet.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does it include temperature sensing?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely, it features a fast-response water-temperature sensor, providing real-time data to help locate temperature breaks where fish congregate.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How does CHIRP technology improve fishfinding?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"CHIRP sweeps a broad frequency range continuously, delivering sharper images, better target separation, and performance at speed or in noisy conditions over single-frequency sonar.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is it easy to retrofit on existing setups?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it can retrofit to compatible thru-hull installations like the R209 series, with exclusive ID technology for quick sounder recognition and minimal hassle.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What maintenance does it need?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Rinse with fresh water after use to prevent salt buildup, inspect cables and fairing periodically, and avoid impacts to keep the epoxy\/urethane window acoustically pristine.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\u003c\/div\u003e\u003cp\u003eThe R509LHW: 2 to 3 Kilowatt Broadband Chirp Transducer gives precise separation between bait fish and game fish. The wider, high Frequency beam in addition to providing vast bottom coverage and precise Fish detection in the upper water column that can sometimes go unseen with narrow beam transducers, but more importantly it shows what is around your vessel, features bait which may attract game fish.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0013773001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e10000 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e28\/60 kHz Low\/ 150\/250 kHz High\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 To 25 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0013773001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eExtreme Target Detail And Image Resolution At All Depths\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003ePrecise Separation Between Baitfish And Gamefish\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBottom Discrimination Of Fish Laying On The Seabed\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDeep Sounding Accuracy Down To 3,000 Meter\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAbility To Detect Targets At Greater Depths And Higher Speeds\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAbility To Find Targets Within The Noise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDesigned For Use With The S5100 High Performance Sounder Module\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0013773001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eXSONIC R509LH-W Thru-Hull Wide-Beam CHIRP w\/Fairing Block\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGet more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDepth \u0026amp; fast response water-temperature sensor\u003c\/li\u003e\n\u003cli\u003eCHIRPs across the following bandwidths:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul style='\"margin-left:'\u003e\n\u003cli\u003eLow Frequency 28 to 60 kHz\u003c\/li\u003e\n\u003cli\u003eHigh Frequency 150 to 250 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e25 internal Broadband Ceramics\u003c\/li\u003e\n\u003cli\u003eEpoxy housing with stuffing tube and high-performace fairing\u003c\/li\u003e\n\u003cli\u003eBoat size: 12M (40’)\u003c\/li\u003e\n\u003cli\u003eHull Type — Fiberglass, Wood, Metal\u003c\/li\u003e\n\u003cli\u003eCan retrofit to existing R209 install\u003c\/li\u003e\n\u003cli\u003eExclusive Xducer ID® technology\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHull Deadrise: 0° to 25°\u003c\/li\u003e\n\u003cli\u003eAcoustic Window: Epoxy\/urethane\u003c\/li\u003e\n\u003cli\u003eWeight: 20.8kg (46lb)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003exSonic R509LH-W is an epoxy shell CHIRP sensor, which is very suitable for sport fishing and commercial boats of 25 feet and above. This dual channel transducer combines low CHIRP...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-72568\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13773-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161845\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32540424175709,"sku":"72568","price":6135.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-r509lh-w-1.jpg?v=1673129457"},{"product_id":"83717-navico-xsonic-ss175l-stainless-steel-thru-hull-transducer","title":"Navico XSONIC SS175L Stainless Steel Thru-Hull Transducer - 20\u0026deg;","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your vessel's sonar capabilities with the powerhouse SS175L stainless steel thru-hull transducer, engineered for anglers chasing big game in the deepest waters. This low-profile beast with a 20-degree tilted element slices through the water column like a pro, delivering razor-sharp images of fish arches, structure, and bottom detail that traditional sonar setups can only dream of.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose the SS175L for Deep-Water Dominance?\u003c\/h2\u003e\n  \u003cp\u003ePicture this: you're miles offshore, targeting trophy species lurking beyond 2,000 feet. The SS175L's low CHIRP technology—sweeping from 40 to 60 kHz—unlocks exceptional target separation and coverage with beam widths that widen from 32 degrees at the lower end to a focused 21 degrees higher up. No more guessing games with vague echoes; this transducer paints the underwater world in high definition, spotting schools of baitfish amid wrecks or spotting that lone monster holding tight to the bottom.\u003c\/p\u003e\n  \n  \u003cp\u003eCrafted from rugged stainless steel, it shrugs off the harshest marine environments, making it ideal for fiberglass, wood, steel, or aluminum hulls. The built-in fast-response temperature sensor keeps you dialed into water conditions, helping predict fish behavior on the fly. With 1kW power handling and XID digital integration, it pairs seamlessly with modern chartplotters for plug-and-play performance.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Performance Highlights\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuperior Low CHIRP Sweep:\u003c\/strong\u003e 40-60 kHz bandwidth crushes deep-water challenges, penetrating up to 3,000 meters in optimal conditions for unmatched resolution.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e20-Degree Tilted Design:\u003c\/strong\u003e Optimizes beam angle for dead-rise hulls, ensuring maximum bottom coverage without dead zones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProven Depth and Temp Sensing:\u003c\/strong\u003e Analog and digital temp readout plus extreme depth capability—perfect for bluewater pursuits.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10-Meter Cable:\u003c\/strong\u003e Ample length for clean routing from cockpit to transducer mount, ending in a reliable black 9-pin connector.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBroad Hull Compatibility:\u003c\/strong\u003e From planing hulls to displacement vessels, it mounts flush for minimal drag and noise.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eReal-World Advantages for Serious Anglers\u003c\/h2\u003e\n  \u003cp\u003eAnglers swear by this transducer for its ability to differentiate bait from game fish amid complex structures—think canyons, drop-offs, and pinnacles where precision matters. Unlike narrower-bandwidth options, the SS175L's CHIRP versatility covers the sweet spot around 50 kHz while extending your reach, saving you from multiple installations. Commercial ops and tournament pros appreciate the time saved on setup and the confidence in split-second decisions during the bite.\u003c\/p\u003e\n  \n  \u003cp\u003eInstallation is straightforward for those with thru-hull experience: drill, bed in sealant, and secure. The low-profile housing minimizes turbulence, keeping your hull hydrodynamically sound. Pair it with high-end multifunction displays, and you'll unlock advanced features like bottom-lock and fish ID alarms that turn raw data into actionable intel.\u003c\/p\u003e\n\n  \u003ch2\u003eMaximizing Your SS175L Setup\u003c\/h2\u003e\n  \u003cp\u003eTo get the most out of this transducer, focus on hull location—forward of props and strakes for clean water flow. Calibrate gain and sensitivity post-install for your specific boat speed and conditions. In shallow water, it still shines, but it truly excels when you're probing the abyss, revealing thermoclines and suspended fish with eerie accuracy.\u003c\/p\u003e\n  \n  \u003cp\u003eBacked by Airmar engineering heritage, this isn't entry-level gear; it's the choice for captains who demand reliability when the stakes are high. Elevate your fishing game and never miss a mark again.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat hull types is the SS175L compatible with?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's designed for fiberglass, wood, steel, and aluminum hulls, offering versatile mounting for most recreational and commercial boats.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow deep can the SS175L transducer detect?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eExpect reliable performance down to 2,500 feet or more, with peak capabilities reaching 3,000 meters in ideal conditions thanks to its powerful low CHIRP.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it include a temperature sensor?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it features a fast-response water-temperature sensor with both analog and digital outputs for precise readings.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the beam width on this transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe low CHIRP provides a 32-degree to 21-degree beam width, balancing wide coverage with sharp target definition.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the 20-degree tilt suitable for my boat?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe 20-degree tilted element is perfect for hulls with moderate deadrise angles, optimizing the sonar beam for better bottom tracking.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat cable length and connector does it have?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt comes with a 10-meter (33-foot) cable and a black 9-pin XSONIC connector for easy integration.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it handle high-power systems?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, rated at 1kW, it's built for demanding setups that push sonar performance to the limit.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eXSONIC SS175L Stainless Steel Thru-Hull Transducer - 20°\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SS175L is a single-frequency LOW CHIRP Stainless Steel Thru-Hull Transducer offering exceptional detail and coverage in Deep Water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow CHIRP - 40-60 kHz with 32°- 21° beam for excellent fish targets\u003c\/li\u003e\n\u003cli\u003eReach Depth ranges of up to 2,500' with Low CHIRP\u003c\/li\u003e\n\u003cli\u003eFiberglass and wood hulls\u003c\/li\u003e\n\u003cli\u003e10M Cable with 9-Pin XSONIC Connector\u003c\/li\u003e\n\u003cli\u003eCompatible with Lowrance HDS Carbon and Simrad NSS Evo3 Displays\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSensor, hybrid dual imaging, manufacturing number 000-12728-001, \"separator\" installed on the cross arm. The broadband sounder is 83\/200k Hz, and the downward scan imaging is 455\/800k Hz. With 9-pin x sonic plug.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-72606\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13776-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024161876\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32540444065885,"sku":"CWR-72606","price":1858.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-xsonic-ss175l-stainless-1.jpg?v=1673129632"},{"product_id":"94758-navico-shoot-thru-the-hull-pod","title":"Navico Shoot Thru The Hull Pod - No Temp - 9-Pin","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your boat's sonar capabilities with this reliable shoot-thru hull pod transducer, designed for seamless integration without the hassle of external mounting. Perfect for anglers who want clear depth readings on the water, this 9-pin model delivers consistent performance across a range of vessels, from sleek fishing boats to rugged offshore rigs.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose a Shoot-Thru Hull Transducer?\u003c\/h2\u003e\n  \u003cp\u003eUnlike traditional transom-mounted options that can snag lines or get damaged in rough conditions, this pod-style transducer mounts directly inside the hull. It sends sonar signals through the fiberglass or plastic hull material, providing accurate water depth measurements without compromising your boat's sleek lines or warranty. Ideal for multi-hull designs, pontoons, or any setup where drilling a hole feels like overkill.\u003c\/p\u003e\n  \n  \u003cp\u003eOperating at dual 83\/200 kHz frequencies, it balances wide-area scanning with pinpoint detail. The 83 kHz mode excels in shallow waters and offers broad coverage for spotting structure quickly, while 200 kHz sharpens focus for deeper precision—great for tracking bottom contours or marking fish holds during your next tournament.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Performance Advantages\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRobust Build for Marine Life:\u003c\/strong\u003e Crafted from tough plastic that withstands constant water exposure, impacts, and temperature swings, ensuring years of dependable service.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready Frequencies:\u003c\/strong\u003e Supports broadband medium\/high CHIRP sonar for enhanced target separation and clearer images than conventional sonar.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDepth-Focused Design:\u003c\/strong\u003e Zeroes in on water depth readings, helping you navigate safely and locate prime fishing spots without distractions from unnecessary sensors.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile 9-Pin Connection:\u003c\/strong\u003e Plugs straight into compatible Simrad, Lowrance, or B\u0026amp;G sounder units, making setup a breeze for most modern chartplotters.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexible Mounting Options:\u003c\/strong\u003e Shoot-thru hull for inboard installs or adaptable for trolling motor setups, suiting various boat configurations.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eInstallation Insights from Real Boaters\u003c\/h2\u003e\n  \u003cp\u003eMany users swear by the simplicity: Clean the hull interior, apply a bed of marine sealant or epoxy, position the pod flat against the hull (dead rise under 20 degrees works best), and secure it. No fairing blocks needed, and it performs reliably through hull thicknesses up to 1 inch. Pro tip: Test in a bucket of water first to verify signal strength before the full install. This approach keeps your deck pristine and your electronics humming.\u003c\/p\u003e\n  \n  \u003cp\u003eFor those upgrading from older fixed-frequency transducers, the jump to CHIRP-like performance here means fewer false readings and more fishable intel. It's a staple for bass boats zipping across lakes or saltwater warriors chasing pelagics.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Applications\u003c\/h2\u003e\n  \u003cp\u003ePicture this: You're drifting a flats fishery, eyes glued to the screen as the transducer paints a vivid picture of the sandy bottom and lurking redfish. Or navigating a rocky inlet at dusk—the precise depth data keeps you off the hazards. This pod shines in scenarios where reliability trumps bells and whistles, delivering what you need without the fluff.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat boats work best with this shoot-thru hull pod?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's optimized for fiberglass or plastic hulls with a deadrise angle under 20 degrees. Works great on bass boats, center consoles, and pontoons—avoid thicker aluminum or wood hulls for best results.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes this transducer measure water temperature?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo, this model focuses solely on depth sonar, keeping it lightweight and dedicated to core performance without temp sensor extras.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs it compatible with my Lowrance HDS or Simrad unit?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, the 9-pin connector pairs perfectly with most Lowrance, Simrad, and B\u0026amp;G sounders that support 9-pin transducers—just confirm your model's connector type.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow deep can this 83\/200 kHz transducer read?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eEffective depths vary by hull material and conditions, but expect solid performance from shallow flats up to several hundred feet in ideal setups, thanks to CHIRP efficiency.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use it as a trolling motor transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—its skimmer design adapts well to trolling motor mounts, providing stable readings even when the motor's moving.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the warranty on this pod?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt comes with a limited 1-year warranty, covering manufacturing defects under normal marine use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWill hull thickness affect performance?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMinimal impact up to 1-inch thick hulls; thinner is better for maximum signal strength. Always test post-install.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eSince first pioneering recreational fish-finding technology 60 Year ago, Lowrance ® has changed the landscape of the marine electronics industry with continued sonar and transducer innovation. As sonar technology continues to evolve with more accurate and higher-definition underwater views, anglers and boaters have come to rely on Lowrance for their marine electronics needs.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0014886001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e83\/ 200 kHz Broadband Medium\/ High CHIRP Sonar Frequencies\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0014886001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eDurable Plastic Construction\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports Medium And High Chirp Frequencies\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMeasures Depth Of Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFeatures A 9-Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHull Mount Installation\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eShoot Thru The Hull Pod - No Temp - 9-Pin\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e9-Pin 83\/200 kHz shoot-thru or trolling-motor mount skimmer depth only\u003c\/p\u003e\u003cp\u003eWorks with Simrad, Lowrance and B \u0026amp; G Sounder units that have a 9 pin Connector\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eSensor, Mfg#000-14886-001, 83\/200 k Hz, hull or towing motor mount. With 9-pin plug.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-83647\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14886-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024177488\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32541138878557,"sku":"CWR-83647","price":82.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-shoot-thru-the-1.jpg?v=1673141644"},{"product_id":"95430-navico-9-pin-high-speed-skimmer-transducer-83-200","title":"Navico 9-Pin High Speed Skimmer Transducer 83\/200 kHz","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eDiscover the edge you need on the water with this reliable transom-mount skimmer transducer, engineered for anglers who demand crystal-clear underwater images even at high speeds. Perfect for weekend warriors and tournament pros alike, it pairs seamlessly with popular Lowrance chartplotters and fishfinders, delivering precise depth readings and water temperature data to help you locate structure, baitfish, and trophy catches faster.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Features That Set It Apart\u003c\/h2\u003e\n  \u003cp\u003eThis high-speed skimmer stands out with its durable plastic housing designed to withstand the rigors of saltwater and freshwater environments. It operates on dual 83\/200 kHz broadband frequencies, providing a versatile mix of wide coverage for spotting schools of fish and sharper detail for bottom contouring. The black 9-pin connector ensures a secure, plug-and-play fit, while the integrated temperature sensor keeps you informed on water conditions that influence fish behavior.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransom-Mount Design:\u003c\/strong\u003e Easy to install on most outboard or I\/O setups without drilling into the hull.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMedium\/High CHIRP Support:\u003c\/strong\u003e Balances broad scanning (83 kHz) with high-resolution imaging (200 kHz) for all-around performance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Capability:\u003c\/strong\u003e Maintains strong signals up to planing speeds, ideal for trolling or running between spots.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDepth and Temp Sensing:\u003c\/strong\u003e Accurate measurements down to hundreds of feet, plus real-time temp for spotting thermoclines.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWhy Anglers Choose This Skimmer Transducer\u003c\/h2\u003e\n  \u003cp\u003eIn the world of marine electronics, not all transducers are created equal. This model's skimmer style hugs the hull for minimal drag and optimal beam projection directly beneath your boat, reducing dead zones common in flush-mount alternatives. Whether you're chasing walleye in shallow bays or bass around deep structure, the 83 kHz cone offers expansive coverage—up to a 60-degree beam angle—while 200 kHz zooms in on finer details like individual fish arches and wreck edges.\u003c\/p\u003e\n  \u003cp\u003eBoat owners appreciate its rugged build that resists cavitation and aeration, ensuring consistent performance during rough conditions or high-speed runs. It's a smart upgrade for anyone tired of fuzzy sonar returns or frequent transducer swaps, offering reliable service season after season.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless Installation and Setup Tips\u003c\/h2\u003e\n  \u003cp\u003eInstalling this 9-pin transducer is straightforward for DIYers. Position it about 1\/3 aft from the transom's leading edge, parallel to the waterline at rest, and secure with stainless hardware. Run the cable along the hull interior, avoiding heat sources and sharp edges. Once connected, calibrate your unit's sonar settings to match the frequencies—most Lowrance displays auto-detect it for quick setup.\u003c\/p\u003e\n  \u003cp\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e Deadrise angle adjustments are key; shim if your hull exceeds 20 degrees to keep the face perpendicular to the bottom. Test at various speeds to fine-tune for zero-signal dropouts.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Performance and Compatibility\u003c\/h2\u003e\n  \u003cp\u003eUsers report exceptional target separation in 50-200 feet of water, making it a favorite for Great Lakes perch runs or offshore snapper hunts. It shines with CHIRP-enabled units, unlocking enhanced imaging modes like DownScan for side-by-side live sonar views. Commonly pairs with HDS LIVE, Elite FS, and HOOK Reveal series—check your model's transducer port for seamless integration.\u003c\/p\u003e\n  \u003cp\u003eCompared to single-frequency options, the dual-band setup adapts to diverse fishing scenarios, from open-water searching to precision jigging, without compromising speed or sensitivity.\u003c\/p\u003e\n\n  \u003ch2\u003eCare and Maintenance for Longevity\u003c\/h2\u003e\n  \u003cp\u003eTo maximize lifespan, rinse with fresh water after every saltwater trip and inspect the face for marine growth. Avoid trailering with the skimmer dragging—tilt up your outboard. A quick wipe-down with a soft cloth keeps the lens clean for peak signal transmission. With proper care, it delivers years of trouble-free operation.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What frequencies does this skimmer transducer support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It operates on 83 kHz for wide-area scanning and 200 kHz for detailed imaging, ideal for medium and high CHIRP sonar applications.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this transducer suitable for high-speed boating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its skimmer design maintains reliable sonar performance at planing speeds, minimizing signal loss from hull turbulence.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it measure water temperature?\",\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely, the built-in temp sensor provides accurate surface water readings to help track fish-holding zones.\"\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What type of connector does it use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It features a black 9-pin connector for direct compatibility with many Lowrance fishfinders and chartplotters.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I install this on any boat?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for transom mounting on outboards and sterndrives; ensure your hull deadrise is compatible and follow installation guidelines.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the beam width for these frequencies?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The 83 kHz offers a broad 60-degree cone for coverage, while 200 kHz provides a narrower 20-degree beam for precision.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How deep can it read?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Effective depths reach up to 800-1000 feet depending on conditions, boat speed, and display unit settings.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat frequencies does this skimmer transducer support?\u003c\/h3\u003e\n      \u003cp\u003eIt operates on 83 kHz for wide-area scanning and 200 kHz for detailed imaging, ideal for medium and high CHIRP sonar applications.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this transducer suitable for high-speed boating?\u003c\/h3\u003e\n      \u003cp\u003eYes, its skimmer design maintains reliable sonar performance at planing speeds, minimizing signal loss from hull turbulence.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes it measure water temperature?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely, the built-in temp sensor provides accurate surface water readings to help track fish-holding zones.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat type of connector does it use?\u003c\/h3\u003e\n      \u003cp\u003eIt features a black 9-pin connector for direct compatibility with many Lowrance fishfinders and chartplotters.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan I install this on any boat?\u003c\/h3\u003e\n      \u003cp\u003eIt's optimized for transom mounting on outboards and sterndrives; ensure your hull deadrise is compatible and follow installation guidelines.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's the beam width for these frequencies?\u003c\/h3\u003e\n      \u003cp\u003eThe 83 kHz offers a broad 60-degree cone for coverage, while 200 kHz provides a narrower 20-degree beam for precision.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow deep can it read?\u003c\/h3\u003e\n      \u003cp\u003eEffective depths reach up to 800-1000 feet depending on conditions, boat speed, and display unit settings.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description { line-height: 1.6; font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif; }\n  .faq-section { margin-top: 2em; }\n  .faq-item { margin-bottom: 1.5em; border-bottom: 1px solid #eee; padding-bottom: 1em; }\n  .faq-item h3 { color: #333; margin-bottom: 0.5em; }\n  ul { padding-left: 1.5em; }\n  h2, h3 { color: #2c3e50; }\n\u003c\/style\u003e\u003cp\u003eSince first pioneering recreational fish-finding technology 60 Year ago, Lowrance ® has changed the landscape of the marine electronics industry with continued sonar and transducer innovation. As sonar technology continues to evolve with more accurate and higher-definition underwater views, anglers and boaters have come to rely on Lowrance for their marine electronics needs.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0014884001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e83\/ 200 kHz Broadband Medium\/ High CHIRP Sonar Frequencies\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0014884001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eDurable Plastic Construction\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports Medium And High Chirp Frequencies\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMeasures Depth And Temperature Of Water\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFeatures A Black 9-Pin Connector\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransom Mount Installation\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003e9-Pin High Speed Skimmer Transducer 83\/200 kHz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e9-Pin High Speed Skimmer M\/H PK ASY: 83\/200 kHz transom-mount skimmer depth\/temp - Black 9 pin connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransom Transducer\u003c\/li\u003e\n\u003cli\u003eHigh Speed Skimmer\u003c\/li\u003e\n\u003cli\u003e83\/200kHz with Temp\u003c\/li\u003e\n\u003cli\u003e9-Pin Connector\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eWith 9-pin plug. MSRP: 79.99 Brand: Lowrance\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-84319\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14884-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024177464\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32541223813213,"sku":"CWR-84319","price":76.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-9-pin-high-1.gif?v=1673143121"},{"product_id":"65213-navico-structurescan-153-hd-sonar-stainless-steel-thru-hull-transducer","title":"Navico StructureScan\u0026#153;HD Sonar Stainless Steel Thru-Hull Transducer (Pair) w\/Y-Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eUpgrade your boating experience with the ultimate in underwater visibility. These stainless steel thru-hull transducers, designed exclusively for StructureScan HD systems, transform how you navigate and fish by revealing hidden structures, schools of baitfish, and prime game fish locations with unmatched clarity. Mounted directly through the hull, they deliver seamless imaging even on vessels with steep deadrise angles greater than 24 degrees, ensuring crystal-clear SideScan and DownScan views without compromising boat performance.\u003c\/p\u003e\n\n  \u003ch2\u003eExceptional Imaging Capabilities\u003c\/h2\u003e\n  \u003cp\u003eEquipped with an advanced dual-frequency element array operating at 455 kHz and 800 kHz, these transducers provide extreme detail across expansive areas. Spot bottom composition variations, separate bait from trophy fish, and map underwater terrain down to 300 feet straight down or an impressive 600 feet side-to-side. The exclusive 3-channel beam configuration—dedicated port, starboard SideScan, plus DownScan Imaging—creates a panoramic view that's perfect for serious anglers chasing structure-oriented species like walleye, bass, or offshore pelagics.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt for High-Speed Reliability\u003c\/h2\u003e\n  \u003cp\u003eCrafted from durable stainless steel by Airmar for Navico brands like Lowrance and Simrad, this pair resists corrosion and electrical interference in harsh marine environments. The low-profile design paired with high-performance fairing blocks minimizes hydrodynamic drag, maintaining StructureScan performance at boat speeds up to 35 mph. Whether you're trolling, cruising, or running offshore, these transducers keep delivering without skipping a beat.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless Setup for Optimal Results\u003c\/h2\u003e\n  \u003cp\u003eInstallation is straightforward for thru-hull applications, especially on boats with challenging hull shapes. The kit includes port and starboard transducers, precision fairing blocks, and a Y-cable for simple connection to a single StructureScan HD module. This setup enables simultaneous operation, powering both sides from one source and simplifying wiring. With 30-foot cables, you gain flexibility for clean runs to your display unit. Pro tip: Align the fairings precisely with your hull's water flow to maximize sonar efficiency and reduce turbulence.\u003c\/p\u003e\n\n  \u003ch2\u003ePower and Coverage That Outshines the Competition\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHull Mount Precision:\u003c\/strong\u003e Ideal for stable, drag-free imaging versus transom mounts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e500-Watt Power Rating:\u003c\/strong\u003e Handles deep water and fast scans with robust signal strength.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnhanced Resolution:\u003c\/strong\u003e Dual frequencies capture fine details like wrecks, drop-offs, and weed beds.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Coverage:\u003c\/strong\u003e 600 feet side-to-side reveals vast search areas quickly.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eAnglers report game-changing finds, like pinpointing brush piles or rock piles that hold limits of fish, thanks to the superior bottom discrimination. For navigators, it's invaluable for avoiding hazards in low-visibility conditions.\u003c\/p\u003e\n\n  \u003ch2\u003eMaintenance Tips for Long-Term Performance\u003c\/h2\u003e\n  \u003cp\u003eTo keep your investment performing like new, regularly inspect the transducer faces for marine growth—clean gently with a soft brush and boat soap. Avoid high-pressure washers that could damage the elements. In saltwater, rinse with fresh water after use. This rugged construction, backed by a limited 1-year warranty, ensures years of reliable service on your vessel.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Thru-Hull Beats Transom for Serious Boaters\u003c\/h2\u003e\n  \u003cp\u003eUnlike transom-mounted options that can suffer from cavitation at speed or aeration in rough water, thru-hull designs embed sonar directly in the hull for consistent, noise-free returns. Perfect for multi-species fishing boats, center consoles, or yachts where hull deadrise demands specialized mounting. Pair them with your existing StructureScan HD module, and unlock imaging that feels like having eyes below the waterline.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What depths can these StructureScan HD thru-hull transducers reach?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"They provide detailed imaging down to 300 feet with DownScan and up to 600 feet side-to-side with SideScan, making them suitable for both shallow bays and deeper offshore waters.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Are these transducers suitable for high-speed boating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, the included high-performance fairing blocks ensure reliable StructureScan HD performance at speeds up to 35 mph, with minimal drag.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types work best with this transducer pair?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Designed for boats with steep or variable deadrise angles greater than 24 degrees, providing seamless port and starboard imaging.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need additional cables for installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, the kit includes 30-foot transducer cables and a Y-cable, allowing connection of both transducers to a single StructureScan HD module.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do SideScan and DownScan differ in these transducers?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"SideScan offers wide-area horizontal views for structure mapping (port and starboard beams), while DownScan provides vertical detail directly beneath the boat, combining for comprehensive coverage.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can these transducers be used with Lowrance or Simrad displays?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, they're optimized for Navico StructureScan HD systems on Lowrance and Simrad units, delivering exclusive imaging technology.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What frequencies do they operate on?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Dual-frequency array at 455 kHz and 800 kHz for enhanced resolution and target separation.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat depths can these StructureScan HD thru-hull transducers reach?\u003c\/h3\u003e\n      \u003cp\u003eThey provide detailed imaging down to 300 feet with DownScan and up to 600 feet side-to-side with SideScan, making them suitable for both shallow bays and deeper offshore waters.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eAre these transducers suitable for high-speed boating?\u003c\/h3\u003e\n      \u003cp\u003eYes, the included high-performance fairing blocks ensure reliable StructureScan HD performance at speeds up to 35 mph, with minimal drag.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat hull types work best with this transducer pair?\u003c\/h3\u003e\n      \u003cp\u003eDesigned for boats with steep or variable deadrise angles greater than 24 degrees, providing seamless port and starboard imaging.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDo I need additional cables for installation?\u003c\/h3\u003e\n      \u003cp\u003eNo, the kit includes 30-foot transducer cables and a Y-cable, allowing connection of both transducers to a single StructureScan HD module.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow do SideScan and DownScan differ in these transducers?\u003c\/h3\u003e\n      \u003cp\u003eSideScan offers wide-area horizontal views for structure mapping (port and starboard beams), while DownScan provides vertical detail directly beneath the boat, combining for comprehensive coverage.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan these transducers be used with Lowrance or Simrad displays?\u003c\/h3\u003e\n      \u003cp\u003eYes, they're optimized for Navico StructureScan HD systems on Lowrance and Simrad units, delivering exclusive imaging technology.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat frequencies do they operate on?\u003c\/h3\u003e\n      \u003cp\u003eDual-frequency array at 455 kHz and 800 kHz for enhanced resolution and target separation.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eAs with transom-mount LSS-2 StructureScan HD transducers, these thru-hull Stainless steel transducers deliver extreme target detail, bottom discrimination and bait and game fish separation at depths down to 300 Feet and a wider range of up to 600 Feet side-to-side coverage. All StructureScan HD transducers are packed with an enhanced dual-frequency element array that operates at 455 Kilohertz and 800 Kilohertz. These transducers include a high-performance fairing that will give you Structure performance at speeds up to 35 Miles Per Hour, feature a 30 Feet transducer cable, plus a Y Cable that allows them to be connected to a single StructureScan HD module for simultaneous use.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0011460001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Feet Sidescan\/ 300 Feet Downscan\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e500 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e455\/ 800 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e30 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0011460001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eDurable Stainless Steel Construction\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eStructureScan HD Transducer Features SideScan And DownScan Imaging\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eElements For SideScan As Well As DownScan\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eStructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Pair) w\/Y-Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eLSS-2 Though Hull Transducers\u003cbr\u003e\u003cbr\u003eThru-hull, Stainless Steel  LSS-2 StructureScan® HD transducers, deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'\/92M and a wider range of 600'\/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz.\u003cbr\u003e\u003cbr\u003eThese Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, Stainless steel transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'\/9M transducer cable. \u003cbr\u003e\u003cbr\u003eThe LSS-2 through-hull StructureScan HD sensor can provide extremely high target details, bottom resolution and the separation effect of bait and hunting fish, the depth can reach 300\/92M, and the range is wider...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-54102\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-11460-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024128701\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699283865693,"sku":"CWR-54102","price":1529.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/65213-navico-structurescan-153-hd-sonar-stainless-steel-thru-hull-transducer-0.png?v=1688444300"},{"product_id":"66634-navico-forwardscan-transducer-kit-w-sleeve-plug","title":"Navico ForwardScan\u0026reg; Transducer Kit w\/Sleeve \u0026 Plug","description":"\u003cp\u003e\u003cspan style=\"color: rgb(0, 8, 18); font-family: DINNextLTPro-Light, Arial, sans-serif; font-size: 15px;\"\u003eKnow what lies ahead with ForwardScan. This compact transducer provides a forward-looking view of up to eight times your current depth, allowing you to navigate shallow or poorly-charted waters with confidence. Includes a standard ForwardScan transducer, stainless steel sleeve, and blanking plug.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(0, 8, 18); font-family: DINNextLTPro-Light, Arial, sans-serif; font-size: 15px;\"\u003eSee a simple, immediately understandable view of the bottom ahead. Bottom Color Tracking shows the bottom as a solid terrain in an uncluttered, side-on picture. For more detail, you can choose to display sonar returns from throughout the water column; these can illustrate other potential hazards such as dock posts. Perfect for cruising, you can also overlay ForwardScan depth data on charts: Heading Line View uses color-coded segments to represent deep, medium, and shallow water ahead. Depths are customizable to suit your boat's draught, and a shallow depth alarm helps to ensure you're never caught unaware.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eImagine gliding through unfamiliar shallows or dimly charted bays without the nagging worry of hidden obstacles lurking just ahead. That's the peace of mind the ForwardScan transducer kit delivers to boaters who crave safer adventures on the water. This thru-hull mounted powerhouse uses forward-looking sonar to paint a real-time picture of the seabed up to eight times your current depth—typically four to five times under everyday conditions—empowering you to navigate with unwavering confidence.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted for seamless integration into your existing setup, this kit includes the compact 180 kHz transducer, a durable stainless steel sleeve for thru-hull installation, and a blanking plug for hassle-free maintenance. Its smart design minimizes interference from standard 200 kHz fishfinders, so you can run it alongside your current gear without skipping a beat.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy Boaters Trust ForwardScan for Unrivaled Safety\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCrystal-Clear Forward Visibility:\u003c\/strong\u003e Spot the bottom contour ahead in stunning 2D detail, with bottom color tracking that simplifies reading terrain like a side-view map. Perfect for dodging sandbars, reefs, or unexpected drop-offs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChart Overlay Magic:\u003c\/strong\u003e Merge ForwardScan data right onto your nautical charts via heading line view. Color-coded segments flag deep, medium, and shallow zones ahead, tailored to your vessel's draft for personalized alerts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShallow Water Guardian:\u003c\/strong\u003e Customizable shallow depth alarms keep you one step ahead of trouble, giving instant audio and visual warnings so you can adjust course smoothly.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBonus Temperature Insights:\u003c\/strong\u003e The built-in water temp sensor adds value, helping you track conditions for fishing hotspots or comfortable cruising.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eInterference-Free Operation:\u003c\/strong\u003e At 180 kHz, it plays nice with your 200 kHz down-facing sonar, ensuring clean, reliable data every time.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"how-it-works\"\u003e\n    \u003ch2\u003eHow ForwardScan Transforms Your On-Water Experience\u003c\/h2\u003e\n    \u003cp\u003eForwardScan isn't just another sonar—it's your proactive navigator. Transmitting and receiving pulses up to ten times faster than older systems, it refreshes the view in real time, showing not only the seabed but potential hazards like submerged pilings throughout the water column.\u003c\/p\u003e\n    \n    \u003cp\u003eFor cruisers exploring coastal inlets or anglers probing skinny waters, the simple 2D sonar display unclutters your screen, focusing on what matters: safe passage. Overlay it on charts, and you've got a dynamic depth profile extending your situational awareness far beyond traditional echo sounders.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\"In three meters of water, expect to see 12-15 meters ahead—enough to slow down or turn before trouble hits.\" – Real-world performance from seasoned skippers.\u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eEffortless Setup for Any Vessel\u003c\/h2\u003e\n    \u003cp\u003eInstalling the ForwardScan kit is straightforward for DIY boaters or pros alike. The 50.8mm (2-inch) stainless steel thru-hull fitting suits most hulls, and the on-water removable design means no dry-docking for tweaks. Connect it directly to compatible Simrad multifunction displays or sounder modules via the StructureScan HD port—plug-and-play simplicity that gets you scanning in under an hour.\u003c\/p\u003e\n    \n    \u003cp\u003ePro Tip: Position the transducer forward-facing, dead ahead, at least 0.6 meters below the waterline for optimal performance. The included blanking plug seals the hole neatly when you're off the water, preventing leaks and easing winter storage.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-applications\"\u003e\n    \u003ch2\u003ePerfect for Every Boating Adventure\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCoastal Cruising:\u003c\/strong\u003e Enter uncharted coves with eyes wide open.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFishing in Skinny Water:\u003c\/strong\u003e Probe flats and bays without grounding your flats boat.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSailboat Navigation:\u003c\/strong\u003e Swing confidently through tidal shifts and shoals.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTrawlers and Powerboats:\u003c\/strong\u003e Extend your chartplotter's reach for relaxed long hauls.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhether you're a weekend warrior or full-time liveaboard, ForwardScan elevates safety without complicating your helm setup.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is the forward-looking range of the ForwardScan transducer?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It provides a view up to 8 times your current depth under ideal conditions, with typical performance at 4-5 times. For instance, in 3 meters of water, see 12-15 meters ahead.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does ForwardScan interfere with my existing fishfinder?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, operating at 180 kHz, it's designed to minimize clashes with common 200 kHz transducers, allowing simultaneous use.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is there a temperature sensor included?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, the transducer features a built-in water temperature sensor for added utility.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I install the ForwardScan kit?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Use the thru-hull mount with the provided stainless steel sleeve. It's on-water removable for easy access, ideal for most hull types.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What displays work with ForwardScan?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It connects via the StructureScan HD port on compatible Simrad NSS evo2, NSO evo2, and similar multifunction displays or sounder modules.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I overlay ForwardScan data on my charts?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—heading line view integrates depth data with color-coded shallow, medium, and deep zones directly on your charts.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What's the benefit of bottom color tracking?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It delivers a clean, terrain-like 2D side view of the bottom ahead, making it easy to interpret at a glance.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the forward-looking range of the ForwardScan transducer?\u003c\/summary\u003e\n        \u003cp\u003eIt provides a view up to 8 times your current depth under ideal conditions, with typical performance at 4-5 times. For instance, in 3 meters of water, see 12-15 meters ahead.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes ForwardScan interfere with my existing fishfinder?\u003c\/summary\u003e\n        \u003cp\u003eNo, operating at 180 kHz, it's designed to minimize clashes with common 200 kHz transducers, allowing simultaneous use.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs there a temperature sensor included?\u003c\/summary\u003e\n        \u003cp\u003eYes, the transducer features a built-in water temperature sensor for added utility.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I install the ForwardScan kit?\u003c\/summary\u003e\n        \u003cp\u003eUse the thru-hull mount with the provided stainless steel sleeve. It's on-water removable for easy access, ideal for most hull types.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat displays work with ForwardScan?\u003c\/summary\u003e\n        \u003cp\u003eIt connects via the StructureScan HD port on compatible Simrad NSS evo2, NSO evo2, and similar multifunction displays or sounder modules.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I overlay ForwardScan data on my charts?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—heading line view integrates depth data with color-coded shallow, medium, and deep zones directly on your charts.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the benefit of bottom color tracking?\u003c\/summary\u003e\n        \u003cp\u003eIt delivers a clean, terrain-like 2D side view of the bottom ahead, making it easy to interpret at a glance.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eKnow what lies ahead with ForwardScan. This compact transducer provides a forward-looking view of up to eight times your current depth, allowing you to navigate shallow or poorly-charted waters with confidence. features a standard ForwardScan transducer, stainless steel sleeve, and blanking plug. Know What Lies Ahead: ForwardScan uses forward-looking sonar to give you a clear view of the bottom ahead of your boat. This award-winning technology is a powerful defense against running aground in shallow, unfamiliar, or poorly-charted waters. ForwardScan generally offers a forward view of 4 to 5 times your current depth; for example in 3 Meter of water, see the bottom 12 to 15 Meter (40 to50 Feet) ahead. Under ideal conditions ForwardScan can see even further, looking ahead up to 8 times your current depth. The 180 Kilohertz ForwardScan transducer is designed to minimize interference from common 200 Kilohertz transducers, enabling it to be used alongside existing fish-finding or depth-tracking sonar. Simple 2D View and Chart Overlay: See a simple, immediately understandable view of the bottom ahead. Bottom Color Tracking shows the bottom as a solid terrain in an uncluttered, side-on picture. For more detail, you can choose to display sonar returns from throughout the water column; these can illustrate other potential hazards such as dock posts. Perfect for cruising, you can also overlay ForwardScan depth data on charts: Heading Line View uses color-coded segments to represent deep, medium, and shallow water ahead. Depths are customizable to suit your boat’s draught, and a shallow depth alarm helps to ensure you’re never caught unaware.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0011674001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e200 kHz Transducer\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0011674001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eSimple 2D View Of The Bottom Ahead\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eNavigate Safely With ForwardScan Data Overlaid On Charts\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLook Ahead Up To 8 Times Your Current Depth (Generally 4 To 5 Times)\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDesigned To Minimize Interference From Existing 200 Kilohertz Transducers\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt-In Water Temperature Sensor Offers Extra Value\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eConnects To The StructureScan ® HD Port On Compatible Displays Or Sounder Modules\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy Installation And Maintenance With An On-Water Removable Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0011674001 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/InstallationInstructions\/Forwardscan_UG_EN_988-10761-002_w.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eForwardscan_UG_EN_988-10761-002_w.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eSimrad 0011674001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eForwardScan® Transducer Kit with Sleeve \u0026amp; Plug\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eKnow what lies ahead, with ForwardScan. This forward-looking sonar provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly-charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water.\u003cbr\u003e\u003cbr\u003eThe ForwardScan transducer is compatible with Simrad NSS evo2 and NSO evo2 MFD systems, and can be easily installed on almost any craft.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEasy to use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eForward-looking 2D sonar imaging\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBottom Color Tracking for a simplified bottom view\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeading Line View combines ForwardScan depth data into heading line on charts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShallow depth alarm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum forward view of 8X current depth, nominally 4-5X current depth\u003cbr\u003eOperates at 180kHz, reducing interference from traditional 200kHz echosounders\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in temperature sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e50.8mm (2\") stainless steel through-hull fitting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnects directly to Simrad NSS evo2, or NSO evo2 via SonarHub sounder module\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSimrad Prospective Transducer Kit Model: 000-11674-001 Provides water depth information in front of the ship so that the crew can safely navigate in shallow waters or low waters. The ability to look forward can reach 8 times the depth, but the normal working range is 5 times the depth 4 times. Ex 10 depth can perform 80 face-up operations at 180khz to reduce interference from traditional 200khz echo sounders. The transmission and reception speed is 10 times faster than the previous forward-looking system, which can provide real-time updates. Network options: directly connect to sonar hub or nss evo2. nss evo2, nso evo2, zeus 2forwards can provide forward scanning sonar view. For all power and sailing boats that require safety and peace of mind, sonar is the ideal forward-looking two-dimensional echo sounder because they know the depth of the water ahead of the ship. Unlike other forward-looking sound generators, the forward scan can display bottom images up to 8 times the current depth. It is integrated with your onboard ns evo2 or zeus touch and can be fully controlled on any operating station.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSimple 2D view of the bottom ahead\u003c\/li\u003e\n\u003cli\u003eNavigate safely with ForwardScan data overlaid on charts\u003c\/li\u003e\n\u003cli\u003eLook ahead up to 8 times your current depth (generally 4-5 times)\u003c\/li\u003e\n\u003cli\u003eDesigned to minimize interference from existing 200 kHz transducers\u003c\/li\u003e\n\u003cli\u003eBuilt-in water temperature sensor offers extra value\u003c\/li\u003e\n\u003cli\u003eEasy installation and maintenance with an on-water removable transducer\u003c\/li\u003e\n\u003cli\u003eConnects to the StructureScan HD port on compatible displays or sounder modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-55523\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-11674-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024133194\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699284160605,"sku":"CWR-55523","price":821.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/66634-navico-forwardscan-transducer-kit-w-sleeve-plug-0.png?v=1688444286"},{"product_id":"71652-navico-transom-mount-transducer-f-structurescan-3d","title":"Navico Transom Mount Transducer f\/StructureScan 3D","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eImagine gliding across the water, your display revealing a lifelike, three-dimensional map of the underwater world below. That's the game-changing reality with this transom mount transducer designed for StructureScan 3D systems. Anglers who rely on precision often struggle with flat, two-dimensional sonar images that leave too much to guesswork. This advanced sonar tool flips the script by delivering crystal-clear, 180-degree panoramic views that pinpoint fish-holding structures, drop-offs, and bottom contours with stunning accuracy.\u003c\/p\u003e\n\n  \u003ch2\u003eRevolutionary Multi-Beam Sonar Technology\u003c\/h2\u003e\n  \u003cp\u003eAt its core, this transducer harnesses cutting-edge multi-beam sonar to paint a picture-perfect 3D image of what's lurking beneath your hull. Unlike traditional side-scan setups that offer mere outlines, it builds depth and perspective, making it easier to interpret exactly where that school of bass is hugging a submerged tree or how a ledge protrudes into prime feeding territory. It even enhances your existing 2D Downscan and StructureScan HD images, sharpening details for those critical moments when every inch counts.\u003c\/p\u003e\n\n  \u003ch2\u003eImpressive Scanning Range and Depth Performance\u003c\/h2\u003e\n  \u003cp\u003eCapable of probing up to 600 feet on either side of your boat and reaching depths of 600 feet straight down, this transducer covers vast areas without sacrificing resolution. Operating across multiple frequencies—including 50 kHz, 200 kHz, and 455 kHz—it adapts seamlessly to varying water conditions, from shallow bays to deeper offshore spots. Fishermen targeting walleye in weedy flats or crappie along rocky banks rave about how it uncovers hidden hotspots that conventional sonar misses.\u003c\/p\u003e\n\n  \u003ch2\u003eFlexible Transom Mounting for Any Boat\u003c\/h2\u003e\n  \u003cp\u003eEngineered for straightforward transom, step, or jackplate installation, this setup fits most recreational boats and bass rigs. The included bracket and hardware ensure a secure, low-profile fit that minimizes drag and interference. Boat owners appreciate its rugged build, standing up to saltwater splashes and rough tournament runs while maintaining peak performance season after season.\u003c\/p\u003e\n\n  \u003ch2\u003eSimplify Your Setup Process\u003c\/h2\u003e\n  \u003cp\u003eGetting this transducer up and running doesn't require a marine electrician. Start by selecting a clean, flat transom spot free of strakes or rivets, roughly one-third back from the hull's stern. Align the bracket parallel to the waterline, drill pilot holes, and secure with provided stainless hardware. Run the cable along the transom, zip-tie it neatly, and plug into your compatible module. Test in shallow water to fine-tune the angle—aim for a slight downward tilt to capture the bottom contour perfectly. Pro tip: In high-speed applications, adjust for porpoising to keep scans steady.\u003c\/p\u003e\n\n  \u003ch2\u003eElevate Your Fishing Strategy\u003c\/h2\u003e\n  \u003cp\u003eTournament pros and weekend warriors alike use this 3D imaging to make smarter decisions. Spot suspended fish in relation to cover at a glance, navigate brush piles without snags, or mark waypoints on ledges that hold stripers. In murky lakes where visibility is zero, its side-to-side sweep reveals weed edges and humps invisible to the eye. Pair it with your chartplotter for overlaid views that turn raw data into fish-catching confidence, ultimately saving time and boosting your catch rate.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes this transducer's 3D imaging stand out from standard 2D sonar?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt uses multi-beam technology to create depth-perceived images with height, width, and perspective, helping you visualize fish positions relative to structures far better than flat 2D scans.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow far can this transom mount transducer scan to the sides?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt scans up to 600 feet to each side of the boat, providing extensive coverage for identifying distant structure and fish schools.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat frequencies does the StructureScan 3D transducer support?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt operates at 50 kHz, 200 kHz, and 455 kHz, offering versatility for different depths and water clarity levels.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this transducer suitable for saltwater fishing?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, its durable construction handles saltwater exposure well, making it ideal for inshore and offshore pursuits.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I mount this on a jackplate or trolling motor?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrimarily designed for transom, step, or jackplate mounting; for trolling motors, check compatibility with specific StructureScan modules.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it improve performance on existing sonar displays?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—it enhances 2D Downscan and StructureScan HD imaging for sharper, more detailed views on compatible units.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the maximum depth capability?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt reaches up to 600 feet, suitable for most freshwater lakes and coastal waters.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What makes this transducer's 3D imaging stand out from standard 2D sonar?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It uses multi-beam technology to create depth-perceived images with height, width, and perspective, helping you visualize fish positions relative to structures far better than flat 2D scans.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How far can this transom mount transducer scan to the sides?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It scans up to 600 feet to each side of the boat, providing extensive coverage for identifying distant structure and fish schools.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What frequencies does the StructureScan 3D transducer support?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It operates at 50 kHz, 200 kHz, and 455 kHz, offering versatility for different depths and water clarity levels.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is this transducer suitable for saltwater fishing?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, its durable construction handles saltwater exposure well, making it ideal for inshore and offshore pursuits.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can I mount this on a jackplate or trolling motor?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Primarily designed for transom, step, or jackplate mounting; for trolling motors, check compatibility with specific StructureScan modules.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does it improve performance on existing sonar displays?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely—it enhances 2D Downscan and StructureScan HD imaging for sharper, more detailed views on compatible units.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's the maximum depth capability?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It reaches up to 600 feet, suitable for most freshwater lakes and coastal waters.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\u003c\/div\u003e\u003cp\u003eThe StructureScan 3D transducer produces three-dimensional scans of underwater terrain and fish-holding structure to create a high-resolution, 180 Degree, three-dimensional view beneath your boat. StructureScan 3D is powered by a multi-beam sonar technology that not only produces picture-like, three-dimensional views of underwater structure and bottom contours, but also boosts the performance of two-dimensional Downscan and StructureScan HD imaging.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0012396001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eUp To 600 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e50\/ 200\/ 455 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0012396001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eScans Up To 600 Feet To Each Side Of Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGet A Real-World, Three-Dimensional View Of Fish, Structure And Bottom Contour That Makes It Easier To Know Where Fish And Structure Are Located In Relation To Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports Transom, Step Or Jackplate Mounting\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0012396001 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/LOW\/InstallationInstructions\/SS3D-Transducer_IM_EN_988-10971-003_w.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSS3D-Transducer_IM_EN_988-10971-003_w.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eTransom Mount Transducer for StructureScan 3D\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIncludes transducer, transom mounting bracket and assembly and mounting screws, washers and nuts. \u003cbr\u003e\u003cbr\u003e\"Product Description This Skimmer transducer works with the StructureScan 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective. The included bracket enables easy transom or step mounting, and jackplate or flush-mount step installation are supported via optional mounting kits. Product Details StructureScan 3D imaging transducer. Scans up to 180 metres (600 feet) to each side of your boat. Supports transom, step, or jackplate mounting.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-60541\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-12396-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024142882\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699285733469,"sku":"CWR-60541","price":420.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/71652-navico-transom-mount-transducer-f-structurescan-3d-0.png?v=1688444237"},{"product_id":"74513-navico-structurescan-3d-stainless-steel-thru-hull-transducer","title":"Navico StructureScan 3D\u0026reg; Stainless Steel Thru-Hull Transducer - Single","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eImagine gliding across the water, your boat slicing through waves, while a crystal-clear, three-dimensional map of the underwater world unfolds on your display. That's the game-changing advantage of the StructureScan 3D Stainless Steel Thru-Hull Transducer. Designed for serious anglers chasing trophy fish in both freshwater lakes and punishing saltwater environments, this single thru-hull unit transforms how you locate structure, spot bait schools, and pinpoint game fish hiding in complex bottom contours.\u003c\/p\u003e\n\n  \u003cp\u003eUnlike traditional 2D sonar that leaves you guessing depths and distances, StructureScan 3D's multi-beam sonar technology paints a lifelike picture. It scans up to 600 feet to each side for sidescan imaging and dives 300 feet deep for downscan detail, all while boosting the clarity of your existing StructureScan HD and Downscan views. Whether you're targeting bass around submerged trees or walleye near drop-offs, this transducer puts you steps ahead, reducing search time and maximizing hookups.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlock Superior Imaging with Proven Features\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExpansive Coverage:\u003c\/strong\u003e Side-to-side scanning reaches 600 feet per side at 455 kHz, revealing hidden ledges, wrecks, and fish-holding hotspots far beyond your boat's shadow.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3D Realism:\u003c\/strong\u003e Experience a real-world view that shows elevation changes, fish arches relative to cover, and precise bottom composition—making split-second decisions intuitive.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurable Thru-Hull Design:\u003c\/strong\u003e Crafted from robust stainless steel by Airmar, it's built to withstand harsh marine conditions, including electrolysis and constant submersion.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLow-Profile Mount:\u003c\/strong\u003e Install flat on the hull or use the included fairing block for optimal performance, minimizing drag even at planing speeds.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnhanced Connectivity:\u003c\/strong\u003e 30-foot cable gives flexibility for clean routing to your Lowrance or Simrad display, compatible exclusively with StructureScan 3D modules.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTechnical Specs That Deliver Results\u003c\/h2\u003e\n  \u003ctable style=\"width:100%; border-collapse: collapse; border: 1px solid #ddd;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"padding: 12px; text-align: left; background-color: #f2f2f2;\"\u003eAttribute\u003c\/th\u003e\n        \u003cth style=\"padding: 12px; text-align: left; background-color: #f2f2f2;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eMounting Type\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eThru-Hull (Hull Mount)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eSidescan Depth\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eUp to 600 feet\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eDownscan Depth\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eUp to 300 feet\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003ePower Output\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e500 Watts\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eFrequency\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e455 kHz\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eHull Deadrise Compatibility\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e16° to 24°\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e30 feet\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eSeamless Installation for Peak Performance\u003c\/h2\u003e\n  \u003cp\u003eThru-hull mounting offers a cleaner, more stable signal than transom options, especially on larger vessels or at higher speeds. For hulls with 16-24 degree deadrise, this single stainless steel transducer mounts directly or with the provided fairing block to align beams perfectly perpendicular to the waterline. Its low-profile shape reduces turbulence, ensuring sharp images even when pushing 30+ knots.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: Position it forward of props and rudders, about 1\/4 of the hull length from the bow, for the widest, undistorted views. Pair it with StructureScan 3D modules on HDS or NSS displays for seamless integration—no extra black box needed.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Stainless Steel Thru-Hull Beats the Rest\u003c\/h2\u003e\n  \u003cp\u003eIn saltwater fisheries where corrosion is the enemy, stainless steel construction laughs off galvanic action and biofouling. This exclusive Navico design features a triple-beam setup: dedicated port\/starboard sidescan plus downscan\/3D channels. Anglers report separating baitfish from stripers at 200+ feet, spotting crayfish burrows, and navigating rock piles with confidence—details that flat 2D sonar simply misses.\u003c\/p\u003e\n\n  \u003cp\u003eFor steeper deadrise hulls, consider the paired version to maintain balanced imaging. Expect reliable performance backed by a limited 1-year warranty, with easy maintenance: just wipe clean and inspect seals seasonally.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Wins from the Water\u003c\/h2\u003e\n  \u003cp\u003eOffshore tuna hunters use it to scan seamounts for kelp patties packed with yellowfin. Inshore redfish pros dial in oyster bars and grass flats, watching tails twitch in 3D relief. Freshwater guides crush smallmouth on points, dialing casts to exact fish positions amid timber. It's not just sonar; it's your underwater eyes, turning hunches into hauls.\u003c\/p\u003e\n\n  \u003ch2\u003eWhat's Included for Quick Setup\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eStainless steel thru-hull transducer\u003c\/li\u003e\n    \u003cli\u003eFairing block for optimized mounting\u003c\/li\u003e\n    \u003cli\u003e30-foot cable\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes the StructureScan 3D Thru-Hull Transducer different from transom-mount versions?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThru-hull models provide a more stable, drag-free install ideal for offshore boats, delivering cleaner signals at speed with stainless steel durability tailored for saltwater.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this transducer work on boats with varying hull deadrise angles?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's optimized for 16-24 degree deadrise. For steeper angles, opt for the paired version to ensure balanced port and starboard imaging.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow deep does the sidescan reach compared to downscan?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eSidescan covers up to 600 feet per side for wide-area structure, while downscan hits 300 feet vertically for precise bottom details and fish separation.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs a fairing block necessary for installation?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt comes included and recommended for hulls needing beam alignment, boosting high-speed performance by keeping the face perpendicular to the water.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat displays is this compatible with?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eExclusively pairs with StructureScan 3D modules on Lowrance HDS Gen3 or Simrad NSS evo2\/3 units for full 3D, sidescan, and downscan overlays.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I maintain the stainless steel transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRinse with freshwater after saltwater use, check for marine growth, and inspect cable connections annually to keep imaging crisp.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the StructureScan 3D Thru-Hull Transducer different from transom-mount versions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Thru-hull models provide a more stable, drag-free install ideal for offshore boats, delivering cleaner signals at speed with stainless steel durability tailored for saltwater.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this transducer work on boats with varying hull deadrise angles?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for 16-24 degree deadrise. For steeper angles, opt for the paired version to ensure balanced port and starboard imaging.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How deep does the sidescan reach compared to downscan?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Sidescan covers up to 600 feet per side for wide-area structure, while downscan hits 300 feet vertically for precise bottom details and fish separation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is a fairing block necessary for installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It comes included and recommended for hulls needing beam alignment, boosting high-speed performance by keeping the face perpendicular to the water.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What displays is this compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Exclusively pairs with StructureScan 3D modules on Lowrance HDS Gen3 or Simrad NSS evo2\/3 units for full 3D, sidescan, and downscan overlays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I maintain the stainless steel transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with freshwater after saltwater use, check for marine growth, and inspect cable connections annually to keep imaging crisp.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eStructureScan 3D gives freshwater and saltwater anglers a unique, three-dimensional view of fish, structure and bottom contours making it easier to understand where fish and structure are located in relation to your boat. With StructureScan 3D, anglers spend less time searching for productive water and more time catching fish. StructureScan 3D is powered by a multi-beam sonar technology that not only produces picture-like, three-dimensional views of underwater structure and bottom contours, but also boosts the performance of two-dimensional Downscan and StructureScan HD imaging.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0013559001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Feet Sidescan\/ 300 Feet Downscan\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e500 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e455 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16 To 24 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e30 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0013559001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eScans Up To 600 Feet To Each Side Of Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGet A Real-World, Three-Dimensional View Of Fish, Structure And Bottom Contour That Makes It Easier To Know Where Fish And Structure Are Located In Relation To Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eStainless Steel Transducer Supports Through-Hull Mounting\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMount Flat Or With The Provided Fairing Block\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eStructureScan 3D® Stainless Steel Thru-Hull Transducer - Single\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAs with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left \u0026amp; Right coverage.\u003c\/li\u003e\n\u003cli\u003eThese Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.\u003c\/li\u003e\n\u003cli\u003eEach feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ \u0026amp; 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable.\u003c\/li\u003e\n\u003cli\u003eFor boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003ePair the StructureScan 3D stainless steel through-type transducer with Navico's StructureScan 3D module to get the best 3D underwater images on the left and right sides of your monitor.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-63402\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13559-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024157701\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699285897309,"sku":"CWR-63402","price":1209.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/74513-navico-structurescan-3d-stainless-steel-thru-hull-transducer-0.png?v=1688444232"},{"product_id":"74878-navico-structurescan-3d-stainless-steel-thru-hull-transducer","title":"Navico StructureScan 3D\u0026reg; Stainless Steel Thru-Hull Transducer - Pair","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eTransform Your Boating Experience with Advanced 3D Sonar Imaging\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding across the water, your boat's hull slicing through waves, while a vivid, lifelike picture of the underwater world unfolds on your display. That's the power of the StructureScan 3D Stainless Steel Thru-Hull Transducer pair. Crafted specifically for vessels with steep or fluctuating deadrise angles—think performance boats or deep-V hulls—these robust transducers deliver unmatched clarity in SideScan, DownScan, and immersive 3D views. Anglers who chase bass in tangled weed beds or hunt offshore wrecks swear by this setup, as it pinpoints fish holds, submerged timber, and subtle bottom shifts with precision that flat 2D sonar just can't match.\u003c\/p\u003e\n    \u003cp\u003eWhat sets these apart? Multi-beam sonar technology scans far wider and deeper than standard setups, revealing structure up to 600 feet port and starboard for SideScan, and down to 300 feet for DownScan. The stainless steel construction laughs off corrosion in saltwater marathons, ensuring reliable performance season after season. No more guessing where the big ones lurk—see them in context relative to your boat's position, making split-second decisions on lure choice or drift adjustments a breeze.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eTechnical Specs Tailored for Serious Boaters\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Thru-hull for seamless integration into hull bottoms with 16-24 degree deadrise.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eScanning Range:\u003c\/strong\u003e Expansive 600 feet per side (SideScan) and 300 feet depth (DownScan).\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 500 watts to punch through murky water or heavy cover.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOperating Frequency:\u003c\/strong\u003e 455 kHz for sharp, detailed returns.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 30-foot length included, with options for extensions if needed for larger consoles.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDesign Highlights:\u003c\/strong\u003e Low-profile pods reduce drag at speed; includes fairing block option for optimal alignment.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese specs aren't just numbers—they translate to real advantages. The separate port and starboard units create a stereo-like 3D effect, boosting resolution and eliminating the shadows common in single-transducer systems. Pair them with compatible chartplotters, and you'll enjoy boosted 2D DownScan and StructureScan HD performance too.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Thru-Hull Mounting Wins for High-Performance Boats\u003c\/h2\u003e\n    \u003cp\u003eFor boats with aggressive hull shapes, transom mounts often compromise on angle and accuracy due to turbulence or poor deadrise fit. Thru-hull installation positions the transducers dead ahead of prop wash, capturing pristine data even at trolling speeds or planing. The stainless steel housing from premium manufacturers withstands galvanic action in brackish bays, while the fairing block ensures a flush fit that maintains hull speed.\u003c\/p\u003e\n    \u003cp\u003ePro tip for installers: Align the transducers parallel to the waterline using the included block, and you'll maximize beam coverage. This setup shines in variable conditions, from shallow flats to deep drop-offs, helping you spot bait balls schooling tight to ledges or crayfish scuttling along rocky bottoms.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Benefits for Everyday Anglers and Captains\u003c\/h2\u003e\n    \u003cp\u003ePicture this: You're dialing in on a school of walleye hugging a mid-lake hump. Traditional sonar shows blobs; StructureScan 3D renders it in 3D glory, letting you measure exact distances and heights. Offshore? Track wrecks layer by layer, distinguishing snags from trophy hideouts. The enhanced bottom discrimination separates sand from mud, gravel from rock—critical for jigging or trolling tactics.\u003c\/p\u003e\n    \u003cp\u003eMaintenance is straightforward: Rinse after saltwater use, inspect cables for chafe, and store dry. This durability means fewer breakdowns mid-trip, more fish in the box. Saltwater pros appreciate the electrical resistance, fending off interference from bilge pumps or radios.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eWhat hull types work best with these thru-hull transducers?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eThey're ideal for boats with 16-24 degree deadrise angles, including deep-V bass boats, center consoles, and offshore rigs where transom mounts falter.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eHow far can these transducers scan?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSideScan reaches 600 feet each side of the boat, while DownScan images down to 300 feet, providing comprehensive coverage for lakes, rivers, and oceans.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eDo I need separate transducers for port and starboard?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, this pair includes dedicated port and starboard units, enabling true 3D stereo imaging for superior structure rendering.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eWhat's the cable length, and can it be extended?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eEach comes with a 30-foot cable. For longer runs, compatible extensions are available to reach distant head units.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eAre these suitable for saltwater use?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—the stainless steel build resists corrosion and electrical interference, making them a top choice for inshore and offshore saltwater fishing.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eDoes the fairing block come included?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eMounting options include flat installation or using the provided fairing block for better performance at higher speeds and optimal beam angle.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch4 itemprop=\"name\"\u003eWhat makes the 3D view different from regular sonar?\u003c\/h4\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eMulti-beam tech creates a real-world, height-mapped perspective, showing fish and structure in relation to your boat—easier to interpret than 2D slices.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types work best with these thru-hull transducers?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"They're ideal for boats with 16-24 degree deadrise angles, including deep-V bass boats, center consoles, and offshore rigs where transom mounts falter.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How far can these transducers scan?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"SideScan reaches 600 feet each side of the boat, while DownScan images down to 300 feet, providing comprehensive coverage for lakes, rivers, and oceans.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need separate transducers for port and starboard?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, this pair includes dedicated port and starboard units, enabling true 3D stereo imaging for superior structure rendering.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the cable length, and can it be extended?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Each comes with a 30-foot cable. For longer runs, compatible extensions are available to reach distant head units.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Are these suitable for saltwater use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—the stainless steel build resists corrosion and electrical interference, making them a top choice for inshore and offshore saltwater fishing.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the fairing block come included?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Mounting options include flat installation or using the provided fairing block for better performance at higher speeds and optimal beam angle.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the 3D view different from regular sonar?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Multi-beam tech creates a real-world, height-mapped perspective, showing fish and structure in relation to your boat—easier to interpret than 2D slices.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eDesigned for boats with steep or variable deadrise hulls, StructureScan 3D Dual Thru-Hull Transducers, provide seamless display of 3D, SideScan and DownScan images. StructureScan 3D gives freshwater and saltwater anglers a unique, three-dimensional view of fish, structure and bottom contours making it easier to understand where fish and structure are located in relation to your boat. With StructureScan 3D, anglers spend less time searching for productive water and more time catching fish. StructureScan 3D is powered by a multi-beam sonar technology that not only produces picture-like, three-dimensional views of underwater structure and bottom contours, but also boosts the performance of two-dimensional Downscan and StructureScan HD imaging.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eLowrance Electronics 0013560001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Feet Sidescan\/ 300 Feet Downscan\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e500 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e455 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16 To 24 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e30 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eLowrance Electronics 0013560001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eScans Up To 600 Feet To Each Side Of Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGet A Real-World, Three-Dimensional View Of Fish, Structure And Bottom Contour That Makes It Easier To Know Where Fish And Structure Are Located In Relation To Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eStainless Steel Transducer Supports Through-Hull Mounting\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMount Flat Or With The Provided Fairing Block\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFeatures Separate Port And Starboard Transducers\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eStructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThese transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAs with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left \u0026amp; Right of coverage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThese Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e**Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable** \u003cbr\u003e\u003cbr\u003e\"Product Description These thru-hull transducers works with the StructureScan 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective. Separate port and starboard transducers deliver optimal coverage for hulls with a steep or dynamic deadrise. The stainless steel transducers can be mounted flat, or with the included fairing blocks. Product Details StructureScan 3D imaging transducer.    \"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-63767\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-13560-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024157718\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699286159453,"sku":"CWR-63767","price":2089.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/74878-navico-structurescan-3d-stainless-steel-thru-hull-transducer-0.png?v=1688444214"},{"product_id":"80929-navico-totalscan-thru-hull-transducer-medium-high-chirp-downscan","title":"Navico TotalScan Thru-Hull Transducer Medium\/High CHIRP, DownScan, StructureScan HD\u0026reg;","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your fishing setup with the versatile TotalScan Thru-Hull Transducer, designed for serious anglers chasing bigger catches in deeper waters. This all-in-one powerhouse combines medium and high CHIRP sonar, DownScan Imaging, and StructureScan HD into a single unit, eliminating the clutter of multiple transducers while delivering crystal-clear underwater visuals. Mounted through the hull, it provides a clean, streamlined installation that's perfect for boats with flat bottoms or moderate deadrise angles up to 5 degrees when paired with a fairing block.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlock Superior Fishfinding Performance\u003c\/h2\u003e\n  \u003cp\u003eImagine scanning vast areas with wide-coverage broadband sonar at 83\/200 kHz, then zooming in on precise targets using medium and high CHIRP frequencies for exceptional target separation. Add DownScan's photo-like imaging and StructureScan HD's side-to-side detail up to 300 feet, and you've got a complete picture of the underwater world. At 500 watts of power, it punches through to 1000 feet on CHIRP modes, making it ideal for offshore adventures or deep inland lakes where fish hide in complex structures.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Advantages for Thru-Hull Mounting\u003c\/h2\u003e\n  \u003cp\u003eUnlike transom-mounted options that drag in the water and pick up turbulence, thru-hull designs like this one sit flush for optimal signal quality at high speeds. The 9-pin connector ensures easy integration with compatible Simrad, Lowrance, and B\u0026amp;G fishfinders. It even senses water temperature, helping you track thermoclines where baitfish—and predators—congregate.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-Function Capability:\u003c\/strong\u003e Broadband (83\/200 kHz), Medium\/High CHIRP, 455\/800 kHz StructureScan, DownScan Imaging\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eImpressive Range:\u003c\/strong\u003e 1000 ft (CHIRP), 300 ft (StructureScan)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Build:\u003c\/strong\u003e Built for marine environments with reliable performance season after season\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStreamlined Setup:\u003c\/strong\u003e Single transducer reduces wiring hassles and boat modifications\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerfect for Real-World Fishing Scenarios\u003c\/h2\u003e\n  \u003cp\u003eWhether you're trolling for walleye in 200 feet of water or hunting bass around submerged timber, this transducer shines. High CHIRP excels at separating individual fish in schools, while StructureScan HD reveals wrecks, drop-offs, and brush piles from afar. Pair it with your chartplotter for overlay views that pinpoint hotspots, saving time and fuel on every trip. Anglers report spotting fish closer to the bottom and navigating tight structure with confidence, turning good days into limits.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips for Peak Results\u003c\/h2\u003e\n  \u003cp\u003eSelecting the right spot is crucial—aim for forward of the prop and keel line to avoid bubbles. For hulls with deadrise, use the included fairing block to angle it properly for a downward beam. Drill carefully, seal with marine sealant, and route the cable away from electrical noise sources. Test in shallow water post-install to fine-tune settings. Pro tip: In colder climates, insulate the thru-hull fitting to prevent freeze damage.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy It Stands Out from Traditional Transducers\u003c\/h2\u003e\n  \u003cp\u003eMost single-function units force compromises, but TotalScan delivers pro-level imaging without the premium price tag of separate high-end modules. It's lighter and more hydrodynamic than dual-band setups, improving boat efficiency. Compared to pod-style thru-hulls, its compact profile minimizes drag, and the all-in-one tech future-proofs your electronics investment.\u003c\/p\u003e\n\n  \u003ch2\u003eCare and Longevity\u003c\/h2\u003e\n  \u003cp\u003eRinse with fresh water after saltwater use, inspect the face for growth, and store dry during off-seasons. Avoid antifouling paints on the active face to prevent signal loss. With proper maintenance, expect years of dependable service backed by a solid manufacturer warranty.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the TotalScan Thru-Hull Transducer different from transom mounts?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Thru-hull transducers mount flush through the boat's hull for cleaner signals at speed, reduced turbulence interference, and a sleeker profile compared to external transom units.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which sonar frequencies does this transducer support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It handles 83\/200 kHz broadband, medium\/high CHIRP, 455\/800 kHz for StructureScan HD, plus DownScan Imaging—all from one unit.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What are the maximum depth ratings?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Up to 1000 feet for medium\/high CHIRP sonar and 300 feet for StructureScan, with 500 watts of power for strong bottom lock.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it measure water temperature?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it includes a built-in temperature sensor to monitor surface water conditions in real-time.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull types is it suitable for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Ideal for flat hulls or deadrises up to 5 degrees with a fairing block, ensuring proper beam angle.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does CHIRP improve fishfinding over traditional sonar?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"CHIRP sweeps across frequencies for better target separation, sharper images, and fewer false readings than fixed single-frequency sonar.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is StructureScan HD and DownScan Imaging?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"StructureScan HD provides detailed side-scanning for structure, while DownScan offers high-res down views—like photos of the bottom—for spotting fish in cover.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes the TotalScan Thru-Hull Transducer different from transom mounts?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThru-hull transducers mount flush through the boat's hull for cleaner signals at speed, reduced turbulence interference, and a sleeker profile compared to external transom units.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhich sonar frequencies does this transducer support?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt handles 83\/200 kHz broadband, medium\/high CHIRP, 455\/800 kHz for StructureScan HD, plus DownScan Imaging—all from one unit.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat are the maximum depth ratings?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eUp to 1000 feet for medium\/high CHIRP sonar and 300 feet for StructureScan, with 500 watts of power for strong bottom lock.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it measure water temperature?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it includes a built-in temperature sensor to monitor surface water conditions in real-time.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat hull types is it suitable for?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIdeal for flat hulls or deadrises up to 5 degrees with a fairing block, ensuring proper beam angle.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does CHIRP improve fishfinding over traditional sonar?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCHIRP sweeps across frequencies for better target separation, sharper images, and fewer false readings than fixed single-frequency sonar.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat is StructureScan HD and DownScan Imaging?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eStructureScan HD provides detailed side-scanning for structure, while DownScan offers high-res down views—like photos of the bottom—for spotting fish in cover.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThe TotalScan ™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan ™ Imaging and StructureScan ™ using only a single transducer.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0014257001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Feet Medium\/ High CHIRP\/ 300 Feet StructureScan\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e500 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0014257001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eAll-In-One Transducer Featuring Broadband, CHIRP, StructureScan HD And DownScan Imaging ™\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports 83\/200 Kilohertz Broadband Sonar Frequencies\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports Medium And High CHIRP Frequencies\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports 455\/800 Kilohertz StructureScan ® Frequencies\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports Water Temperature\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0014257001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eTotalScan Thru-Hull Transducer Medium\/High CHIRP, DownScan, StructureScan HD®\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTotalScan thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.\u003c\/p\u003e\u003cp\u003eThe TotalScan™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™ \u003c\/li\u003e\n\u003cli\u003eSupports 83\/200kHz Broadband sonar frequencies \u003c\/li\u003e\n\u003cli\u003eSupports Medium and High CHIRP frequencies \u003c\/li\u003e\n\u003cli\u003eSupports 455\/800kHz StructureScan® frequencies \u003c\/li\u003e\n\u003cli\u003eSupports Water Temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eWe love outdoor activities and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-69818\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14257-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024169377\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699309883485,"sku":"CWR-69818","price":616.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/80929-navico-totalscan-thru-hull-transducer-medium-high-chirp-downscan-0.png?v=1688443960"},{"product_id":"80930-navico-totalscan-thru-hull-transducer-low-hi-chirp","title":"Navico TotalScan Thru Hull Transducer Low\/Hi Chirp, DownScan, StructureScan HD","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eImagine heading out on the water, your boat slicing through waves, and suddenly your fishfinder lights up with crystal-clear images of fish schools, underwater structures, and the lakebed below. That's the power of the TotalScan Thru-Hull Transducer with Low\/High CHIRP, DownScan, and StructureScan HD. Designed for serious anglers who demand the best from their marine electronics, this all-in-one sensor mounts seamlessly through your hull, delivering unmatched sonar performance without the clutter of multiple transducers.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlock Superior Sonar with All-in-One Technology\u003c\/h2\u003e\n  \u003cp\u003eThis transducer packs everything you need into a single, rugged unit. Forget juggling separate probes for different sonar modes—here, Broadband sonar, advanced CHIRP frequencies, DownScan Imaging, and StructureScan HD all work together from one thru-hull mount. It's built tough for saltwater abuse, with a streamlined design that minimizes drag and maximizes data accuracy even at speed.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBroadband at 50\/200kHz:\u003c\/strong\u003e Traditional sonar for reliable bottom tracking in various depths, perfect for everyday navigation and basic fish detection.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLow and High CHIRP:\u003c\/strong\u003e Sweeping frequency ranges that paint sharper, more detailed fish arches and bottom contours. Low CHIRP excels in deeper waters (up to hundreds of feet), while High CHIRP shines in shallows for pinpoint precision.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDownScan Imaging at 455\/800kHz:\u003c\/strong\u003e Photo-like views of the bottom, revealing fish hiding in weeds, drop-offs, or brush piles that traditional sonar misses.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStructureScan HD:\u003c\/strong\u003e Side-imaging magic that scans up to 300 feet to each side, mapping wrecks, reefs, and ledges in stunning detail.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWater Temperature Sensing:\u003c\/strong\u003e Real-time temp readings to track thermoclines where baitfish—and big game—congregate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eFlexible Thru-Hull Mounting for Real-World Boats\u003c\/h2\u003e\n  \u003cp\u003eWhether your hull is dead flat or has a gentle deadrise up to 5 degrees, this transducer adapts with a simple fairing block (included or optional depending on setup). Installation is straightforward for most DIY boaters: drill, seal, and wire up to your compatible chartplotter. It thrives on planing hulls, displacement vessels, or offshore rigs, providing consistent performance without air bubbles or interference from the keel.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: Position it forward of props and struts for the cleanest water flow, ensuring side-scan reaches its full potential even when trolling for trophy walleye or stripers.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Serious Anglers Swear by TotalScan\u003c\/h2\u003e\n  \u003cp\u003eIn the heat of competition or on family outings, split-second decisions win the day. This transducer turns your display into a window underwater, spotting suspended crappie in timber or bass hugging ledges. Pair it with modern multifunction displays, and you'll overlay CHIRP sonar with StructureScan for hybrid views that reveal more fish than ever. It's not just gear—it's your unfair advantage on the water.\u003c\/p\u003e\n  \n  \u003cp\u003eUsers rave about its sensitivity in murky bays or deep blue offshore, where traditional setups fall short. And since it's from Navico, expect rock-solid reliability backed by marine-grade construction that laughs off corrosion and rough seas.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Compatibility Across Brands\u003c\/h2\u003e\n  \u003cp\u003eEngineered by Navico, this transducer plugs right into popular Simrad, Lowrance, and B\u0026amp;G units. From evo-series chartplotters to HDS and elite fishfinders, it unlocks full TotalScan functionality with a single cable. No adapters needed—just pure, plug-and-play sonar bliss.\u003c\/p\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the TotalScan Thru-Hull Transducer different from pod-mounted options?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Thru-hull models like this one sit flush below the waterline for cleaner signals and better high-speed performance, ideal for larger boats or offshore use. Pod mounts work great on smaller hulls but can suffer from turbulence.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it support both Low and High CHIRP frequencies?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it covers Low CHIRP for deep-water penetration and High CHIRP for shallow-water detail, plus 50\/200kHz broadband for versatile coverage across depths.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this transducer be used on boats with a deadrise angle?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it fits flat hulls or deadrises up to 5 degrees with the included fairing block, ensuring proper alignment and bubble-free operation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What sonar imaging modes does it offer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It combines CHIRP sonar, DownScan Imaging for down-looking detail, and StructureScan HD for side-scanning, all from one unit—no need for multiple transducers.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the TotalScan measure water temperature?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it includes a built-in temperature sensor for monitoring surface water temps, crucial for locating baitfish schools and thermal breaks.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is it suitable for saltwater fishing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Definitely—its durable housing withstands corrosive saltwater environments, making it a top choice for offshore adventures targeting tuna, billfish, or reef species.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does CHIRP improve fishfinding compared to traditional sonar?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"CHIRP sends a continuous sweep of frequencies, creating longer, clearer echoes for better target separation, fish sizing, and bottom detail—far superior to single-frequency pings.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat makes the TotalScan Thru-Hull Transducer different from pod-mounted options?\u003c\/summary\u003e\n      \u003cp\u003eThru-hull models like this one sit flush below the waterline for cleaner signals and better high-speed performance, ideal for larger boats or offshore use. Pod mounts work great on smaller hulls but can suffer from turbulence.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \n    \u003cdetails\u003e\n      \u003csummary\u003eDoes it support both Low and High CHIRP frequencies?\u003c\/summary\u003e\n      \u003cp\u003eYes, it covers Low CHIRP for deep-water penetration and High CHIRP for shallow-water detail, plus 50\/200kHz broadband for versatile coverage across depths.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \n    \u003cdetails\u003e\n      \u003csummary\u003eCan this transducer be used on boats with a deadrise angle?\u003c\/summary\u003e\n      \u003cp\u003eAbsolutely—it fits flat hulls or deadrises up to 5 degrees with the included fairing block, ensuring proper alignment and bubble-free operation.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \n    \u003cdetails\u003e\n      \u003csummary\u003eWhat sonar imaging modes does it offer?\u003c\/summary\u003e\n      \u003cp\u003eIt combines CHIRP sonar, DownScan Imaging for down-looking detail, and StructureScan HD for side-scanning, all from one unit—no need for multiple transducers.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \n    \u003cdetails\u003e\n      \u003csummary\u003eDoes the TotalScan measure water temperature?\u003c\/summary\u003e\n      \u003cp\u003eYes, it includes a built-in temperature sensor for monitoring surface water temps, crucial for locating baitfish schools and thermal breaks.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \n    \u003cdetails\u003e\n      \u003csummary\u003eIs it suitable for saltwater fishing?\u003c\/summary\u003e\n      \u003cp\u003eDefinitely—its durable housing withstands corrosive saltwater environments, making it a top choice for offshore adventures targeting tuna, billfish, or reef species.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \n    \u003cdetails\u003e\n      \u003csummary\u003eHow does CHIRP improve fishfinding compared to traditional sonar?\u003c\/summary\u003e\n      \u003cp\u003eCHIRP sends a continuous sweep of frequencies, creating longer, clearer echoes for better target separation, fish sizing, and bottom detail—far superior to single-frequency pings.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0014259001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eTotalScan Thru Hull Transducer Low\/Hi Chirp, DownScan, StructureScan HD\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTotalScan thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.\u003c\/p\u003e\u003cp\u003eThe TotalScan™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™ \u003c\/li\u003e\n\u003cli\u003eSupports 50\/200kHz Broadband sonar frequencies \u003c\/li\u003e\n\u003cli\u003eSupports Low and High CHIRP frequencies \u003c\/li\u003e\n\u003cli\u003eSupports 455\/800kHz StructureScan® frequencies \u003c\/li\u003e\n\u003cli\u003eSupports Water Temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eWe love outdoor activities and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-69819\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14259-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024169391\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699310276701,"sku":"CWR-69819","price":625.99,"currency_code":"USD","in_stock":false}]},{"product_id":"80931-navico-structurescan-3d-thru-hull-with-l-h","title":"Navico StructureScan 3D Thru Hull with L\/H Chirp and StructureScan 3D","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eImagine gliding across open waters with crystal-clear views of hidden reefs, schools of fish, and submerged structures right from your boat's helm. The StructureScan 3D Thru Hull transducer with L\/H CHIRP and StructureScan 3D integration elevates your on-water adventures by delivering immersive, real-time underwater mapping that traditional 2D sonar simply can't match. Designed for serious anglers and navigators, this robust thru-hull mount captures detailed side and down imaging, helping you pinpoint prime fishing spots or avoid underwater hazards with confidence.\u003c\/p\u003e\n\n  \u003ch2\u003eSuperior Imaging Through CHIRP Technology\u003c\/h2\u003e\n  \u003cp\u003eAt the heart of this transducer lies dual Low\/High CHIRP frequencies, which sweep across a broad spectrum of sound waves for unparalleled target separation and depth penetration. Unlike fixed-frequency sonars that miss fine details, CHIRP dynamically adjusts to provide sharper images of baitfish, wrecks, and bottom contours—even in murky waters. Paired with StructureScan 3D, it renders lifelike 3D perspectives, allowing you to rotate, tilt, and zoom into the underwater world as if you were diving below the surface.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSideScan Range:\u003c\/strong\u003e Up to 300 feet per side for wide coverage.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDownScan Precision:\u003c\/strong\u003e High-definition imaging straight down to reveal structure directly beneath your vessel.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3D Rendering:\u003c\/strong\u003e Intuitive views that make interpreting sonar data effortless for beginners and pros alike.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eVersatile Thru-Hull Mounting for Any Hull Design\u003c\/h2\u003e\n  \u003cp\u003eEngineered for thru-hull installation, this single transducer unit mounts flush to flat-bottomed hulls or adapts to moderate deadrises up to 5 degrees using the included fairing block. This setup minimizes drag, ensures optimal signal transmission, and withstands the rigors of saltwater exposure with its durable marine-grade construction. No more compromising on performance due to hull shape—achieve bubble-free water flow for consistent, high-quality scans.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: During installation, align the transducer parallel to the waterline for maximum effectiveness. Anglers often position it forward of the running gear to avoid interference from props or keels.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Integration with Your Electronics Suite\u003c\/h2\u003e\n  \u003cp\u003eConnecting is straightforward: The StructureScan 3D ports link directly to compatible modules, while the CHIRP connector—with built-in XID technology—plugs into your Multi-Function Display (MFD) via a standard 9-pin interface. This all-in-one design reduces wiring clutter and supports plug-and-play setup across popular marine networks. Whether you're running a compact setup or a full command center, it enhances your existing fishfinder without overhauling your system.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Advantages for Boaters and Fishermen\u003c\/h2\u003e\n  \u003cp\u003eBoat owners rave about how this transducer transforms fishing trips into treasure hunts. Spot submerged timber where bass hide, map drop-offs for trolling runs, or survey channels for safe passage. Its sensitivity to small targets means you'll detect crappie schools or lobster pots that others overlook. In competitive tournaments, that edge can make all the difference—users report landing bigger catches by interpreting 3D overlays that reveal fish-holding structures invisible to the naked eye.\u003c\/p\u003e\n  \n  \u003cblockquote\u003e\"Switched to this thru-hull unit last season and it's a game-changer. The 3D views helped me find a new honey hole loaded with walleye.\" – Experienced Great Lakes angler\u003c\/blockquote\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes the L\/H CHIRP different from standard sonar?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eL\/H CHIRP uses a range of frequencies simultaneously for better resolution and depth, capturing more detailed images of fish and structure than single-frequency options.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this transducer handle deadrise angles?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it fits hulls with up to 5 degrees of deadrise using the fairing block, ensuring proper alignment and performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does StructureScan 3D improve over 2D imaging?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt provides rotatable 3D models of the underwater environment, making it easier to understand bottom composition, fish positions, and contours.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs professional installation required?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eDIY is feasible for handy boaters with hull access, but consulting a marine technician ensures watertight sealing and optimal positioning.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat MFDs is it compatible with?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt works with displays featuring StructureScan 3D ports and 9-pin CHIRP inputs, common in modern marine electronics suites.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work in shallow water?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—effective from just a few feet deep, with adjustable sensitivity to avoid clutter in skinny water.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the L\/H CHIRP different from standard sonar?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"L\/H CHIRP uses a range of frequencies simultaneously for better resolution and depth, capturing more detailed images of fish and structure than single-frequency options.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this transducer handle deadrise angles?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it fits hulls with up to 5 degrees of deadrise using the fairing block, ensuring proper alignment and performance.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does StructureScan 3D improve over 2D imaging?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It provides rotatable 3D models of the underwater environment, making it easier to understand bottom composition, fish positions, and contours.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is professional installation required?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"DIY is feasible for handy boaters with hull access, but consulting a marine technician ensures watertight sealing and optimal positioning.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What MFDs is it compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It works with displays featuring StructureScan 3D ports and 9-pin CHIRP inputs, common in modern marine electronics suites.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work in shallow water?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—effective from just a few feet deep, with adjustable sensitivity to avoid clutter in skinny water.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eStructureScan 3D Thru Hull with L\/H Chirp and StructureScan 3D\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStructureScan 3D thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.\u003c\/p\u003e\u003cp\u003eStructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eWe love outdoor activities and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-69820\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14254-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024169346\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699310833757,"sku":"69820","price":1239.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-structurescan-3d-thru-1_d076758b-adc3-4f00-8a11-45eb7346c79b.jpg?v=1673152010"},{"product_id":"80932-navico-structurescan-3d-thru-hull-transducer-w-medium-high-chirp","title":"Navico StructureScan 3D\u0026reg; Thru-Hull Transducer w\/Medium\/High CHIRP","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Crystal-Clear Underwater Views with StructureScan 3D and CHIRP Technology\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding over hidden reefs, spotting schools of fish darting around submerged wrecks, or tracking the perfect bottom contour for your next big catch—all from a stunning 3D perspective. This thru-hull transducer merges cutting-edge StructureScan 3D imaging with versatile Medium\/High CHIRP sonar, delivering a game-changing tool for serious anglers. Whether you're navigating deep offshore waters or shallow coastal bays, it provides unparalleled detail to help you locate fish-holding structures and individual targets with precision.\u003c\/p\u003e\n    \u003cp\u003eUnlike basic 2D sonar, the 3D imaging creates a lifelike, interactive map of the underwater world. You can pan, tilt, and rotate views in real-time on your compatible display, making it easier to interpret complex terrain. Pair it with CHIRP for razor-sharp target separation: Medium frequencies excel at penetrating deeper waters for solid bottom tracking, while High CHIRP shines in shallows, revealing fine details like baitfish clouds or suspended gamefish.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Set It Apart\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStructureScan 3D Imaging:\u003c\/strong\u003e Generates high-resolution, picture-like 3D scans up to 180 meters on each side of your boat, perfect for identifying structure relative to your position.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual CHIRP Capabilities:\u003c\/strong\u003e Medium\/High frequencies offer broad coverage—deep bottom definition plus crisp shallow-water performance—all in one robust unit.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eThru-Hull Design:\u003c\/strong\u003e Crafted from durable stainless steel, it mounts flush or with a fairing block for hull deadrises up to 5 degrees, ensuring a clean install without drag.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Connectivity:\u003c\/strong\u003e Features a 9-pin connector with XID for direct MFD integration, plus dual 12-pin for StructureScan 3D modules, plus a temperature sensor for real-time water data.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eImpressive Specs:\u003c\/strong\u003e Rated for depths up to 600 feet and 500 watts of power, it handles demanding conditions with reliable performance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese elements combine to give you a multi-tool transducer that replaces multiple units, saving space and simplifying your setup while maximizing your fishing edge.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Integration and Real-World Performance\u003c\/h2\u003e\n    \u003cp\u003eDesigned for compatibility with popular marine electronics, this transducer connects effortlessly to multifunction displays or dedicated sounder modules. The built-in XID technology auto-detects settings, so you're up and scanning with minimal configuration. On the water, expect exceptional side-scan range and down-scan clarity that reveals wrecks, drop-offs, and weed lines in vivid detail.\u003c\/p\u003e\n    \u003cp\u003eFor offshore adventures, rely on Medium CHIRP to lock onto the bottom through thermoclines and track structure at speed. In bays or rivers, switch focus to High CHIRP for hyper-detailed views of the water column, spotting crappie hugging timber or walleye cruising ledges. Anglers report game-changing results: easier jigging spots, quicker structure mapping, and fewer missed opportunities.\u003c\/p\u003e\n    \u003cblockquote\u003e\n      \"It's like having eyes under the boat—3D views make reading the bottom intuitive, and CHIRP nails the fish targets every time.\"\n    \u003c\/blockquote\u003e\n    \u003cp\u003eInstallation is straightforward for thru-hull setups: drill, seal, and fair it to your hull's angle. Its rugged build withstands constant water exposure, delivering years of dependable service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePro Tips for Maximizing Your Transducer's Potential\u003c\/h2\u003e\n    \u003cp\u003eTo get the most from this powerhouse:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eAdjust gain and sensitivity based on water conditions—start low in murk to cut clutter.\u003c\/li\u003e\n      \u003cli\u003eUse 3D rotation to align views with your trolling path for intuitive navigation.\u003c\/li\u003e\n      \u003cli\u003eCombine with forward-facing sonar if available for a complete 360-degree picture.\u003c\/li\u003e\n      \u003cli\u003eCalibrate in known depths to fine-tune accuracy before big trips.\u003c\/li\u003e\n      \u003cli\u003eMonitor water temp readings to correlate with fish activity patterns.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThese tweaks can turn good scans into extraordinary insights, helping you outfish the competition.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes StructureScan 3D imaging different from traditional side scan?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"StructureScan 3D creates interactive 3D models you can pan, tilt, and rotate, offering a more intuitive understanding of fish and structure positions relative to your boat, beyond flat 2D images.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this transducer work with both Simrad and Lowrance displays?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its versatile connectors support compatible Simrad multifunction displays via 9-pin XID and StructureScan 3D modules via dual 12-pin, with similar integration for Lowrance systems.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the difference between Medium\/High CHIRP frequencies here?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Medium CHIRP penetrates deeper for excellent bottom tracking in offshore scenarios, while High CHIRP provides superior detail and resolution in shallower waters and the upper water column.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it be mounted on hulls with a deadrise angle?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it mounts flat or with the included fairing block for deadrises up to 5 degrees, ensuring optimal performance without hydrodynamic issues.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum depth and side-scan range?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It reaches depths up to 600 feet and scans up to 180 meters to each side, giving broad coverage for structure hunting.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it include a temperature sensor?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it features a built-in temperature sensor, providing real-time water temperature data alongside sonar and imaging.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is a separate module required for 3D imaging?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"For full StructureScan 3D functionality, pair it with a compatible StructureScan 3D module, though CHIRP sonar works directly with MFDs.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003c!-- FAQs rendered for accessibility and SEO --\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat makes StructureScan 3D imaging different from traditional side scan?\u003c\/summary\u003e\n        \u003cp\u003eStructureScan 3D creates interactive 3D models you can pan, tilt, and rotate, offering a more intuitive understanding of fish and structure positions relative to your boat, beyond flat 2D images.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this transducer work with both Simrad and Lowrance displays?\u003c\/summary\u003e\n        \u003cp\u003eYes, its versatile connectors support compatible Simrad multifunction displays via 9-pin XID and StructureScan 3D modules via dual 12-pin, with similar integration for Lowrance systems.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the difference between Medium\/High CHIRP frequencies here?\u003c\/summary\u003e\n        \u003cp\u003eMedium CHIRP penetrates deeper for excellent bottom tracking in offshore scenarios, while High CHIRP provides superior detail and resolution in shallower waters and the upper water column.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan it be mounted on hulls with a deadrise angle?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—it mounts flat or with the included fairing block for deadrises up to 5 degrees, ensuring optimal performance without hydrodynamic issues.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the maximum depth and side-scan range?\u003c\/summary\u003e\n        \u003cp\u003eIt reaches depths up to 600 feet and scans up to 180 meters to each side, giving broad coverage for structure hunting.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it include a temperature sensor?\u003c\/summary\u003e\n        \u003cp\u003eYes, it features a built-in temperature sensor, providing real-time water temperature data alongside sonar and imaging.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs a separate module required for 3D imaging?\u003c\/summary\u003e\n        \u003cp\u003eFor full StructureScan 3D functionality, pair it with a compatible StructureScan 3D module, though CHIRP sonar works directly with MFDs.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eThis multi-purpose transducer combines StructureScan ® 3D imaging with low\/high-frequency CHIRP and traditional sonar capabilities. Search underwater terrain for fish-holding structure in 3D, while pinpointing individual fish targets with CHIRP sonar. Low-frequency CHIRP offers excellent bottom tracking, while High CHIRP provides detailed coverage in shallower waters. StructureScan ® 3D Imaging: This thru-hull transducer works with the StructureScan ® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective. CHIRP and Traditional Sonar: The transducer can also be connected directly to the built-in sounder on your Simrad multifunction display, or to a SonarHub sounder module, to provide CHIRP and traditional sonar capabilities. Low-frequency CHIRP offers excellent offshore bottom tracking, while High CHIRP provides detailed coverage of the upper water column and in shallower waters.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0014255001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin With XID For MFD\/ Dual 12 Pin For StructueScan 3D Module\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e500 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0014255001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eStructureScan ® 3D Imaging Transducer\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eScans Up To 180 Meter To Each Side Of Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAlso Provides Low And High-Frequency CHIRP Sonar Capabilities\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eStainless Steel Transducer Supports Through-Hull Mounting\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFeatures Mount Flat Or With The Fairing Block\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0014255001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eStructureScan 3D® Thru-Hull Transducer with Medium\/High CHIRP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStructureScan 3D thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.\u003c\/p\u003e\u003cp\u003eStructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eWe love outdoor sports and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-69821\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14255-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024169353\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699311128669,"sku":"69821","price":1239.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/80932-navico-structurescan-3d-thru-hull-transducer-w-medium-high-chirp-0.png?v=1688443955"},{"product_id":"84435-navico-active-imaging-3-in-1-transom-mount-transducer","title":"Navico Active Imaging 3-in-1 Transom Mount Transducer","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eImagine gliding across the water, your boat humming along, and suddenly your screen lights up with crystal-clear images of submerged rock piles, weed edges, and schools of fish holding tight to structure— all from farther away than ever before. That's the game-changing power of the Active Imaging 3-in-1 transom mount transducer. This isn't just another sonar probe; it's a precision tool that blends advanced CHIRP traditional sonar with high-resolution SideScan and DownScan imaging, overlaid with FishReveal technology to make fish pop against the backdrop of underwater terrain.\u003c\/p\u003e\n\n  \u003cp\u003eFor serious anglers chasing bass in timber-choked coves or walleye along deep drop-offs, this transducer delivers unmatched detail. The refined beam focusing means you spot targets at extended ranges—up to 300 feet SideScan at 455 kHz or 150 feet at 800 kHz—without the fuzzy edges common in older systems. Pair it with Medium\/High CHIRP (83\/200 kHz) for solid bottom tracking up to 1,000 feet, and you've got total coverage from surface to depths, even at trolling speeds up to 55 mph for traditional views.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlock Superior Imaging for Smarter Fishing\u003c\/h2\u003e\n  \u003cp\u003eThe secret sauce here lies in the Active Imaging tech. Unlike conventional SideScan that spreads signals broadly and loses clarity offshore, this design uses separate transmit and receive elements to sharpen beams outward. Result? Pin-sharp images of fish-holding hotspots like standing timber, brush piles, or subtle ledges that hold crappie or stripers. FishReveal takes it further by highlighting fish arches right on DownScan views, so you spend less time guessing and more time hooking up.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnhanced Range and Resolution:\u003c\/strong\u003e See structure 50% farther with cleaner separation, perfect for scanning vast flats or river channels.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Frequencies:\u003c\/strong\u003e Switch between 455\/800 kHz for imaging and 83\/200 kHz CHIRP for wide-area sweeps, adapting to lake, river, or offshore conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBuilt Tough for Real Waters:\u003c\/strong\u003e Polymer housing mimics water's acoustic properties for zero signal loss, plus rugged construction handles rough transits from -15°C to +55°C.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eEffortless Setup on Your Boat\u003c\/h2\u003e\n  \u003cp\u003eTransom mounting keeps it simple—no hull drilling required. Bolt it to the transom, jackplate, or flush-step saver for outboards and stern drives. The 25-foot cable gives plenty of reach to your display unit, ending in a straightforward 9-pin connector. Pro tip: Position it just off the hull bottom, away from strakes or trim tabs, to minimize air bubbles and maximize clean pings. At slower speeds under 10 mph, SideScan and DownScan shine brightest, revealing baitfish clouds suspended mid-water or bottom-hugging predators.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Wins from the Water\u003c\/h2\u003e\n  \u003cp\u003eAnglers report transforming slow days into limits. On a recent reservoir trip, one user dialed in 800 kHz to map a submerged roadbed teeming with bass—structure invisible to standard sonar until they were right over it. It's ideal for structure fishing where seconds count: id weedlines for pike, gravel bars for perch, or humps for deep-water smallies. Temperature sensing adds another layer, helping track thermoclines where fish stack up in summer.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Integration with Top Displays\u003c\/h2\u003e\n  \u003cp\u003ePlug-and-play with modern multi-function displays that support this tech stack. It thrives on high-res screens where full SideScan panoramas unfold without cropping. No extra black boxes needed—just direct connect for instant access to split-screen views: CHIRP ahead, SideScan to the flanks, DownScan below.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes Active Imaging different from standard SideScan?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eActive Imaging sharpens beams with dedicated transmit\/receive elements for higher resolution and longer range, showing finer details like individual branches on timber without range compromises.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow deep can this transducer image structure?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eTraditional CHIRP reaches 1,000 feet, while DownScan and SideScan handle 300 feet at 455 kHz (150 feet at 800 kHz), covering most freshwater and inshore needs effectively.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the best boat speed for SideScan and DownScan?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eOptimal under 10 mph for crisp imaging; traditional CHIRP works up to 55 mph, making it great for high-speed searches then slowing for detailed scans.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I mount this on a jackplate or step hull?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, versatile options include transom, jackplate, or flush-step mounting to suit outboards, I\/O, or pad hulls for bubble-free performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes FishReveal work with all sonar views?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eFishReveal overlays fish targets on high-detail DownScan images, blending CHIRP sensitivity with structure clarity for instant species ID from afar.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the cable, and what's the connector type?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003e25 feet of cable with a 9-pin connector provides ample length for routing to helm-mounted units without extensions.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this suitable for saltwater fishing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—its durable build and wide temp range handle brackish bays or coastal wrecks, spotting reefs and snook hides with ease.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eElevate your sonar game and fish with confidence, knowing every ping reveals hidden opportunities beneath the surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What makes Active Imaging different from standard SideScan?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Active Imaging sharpens beams with dedicated transmit\/receive elements for higher resolution and longer range, showing finer details like individual branches on timber without range compromises.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How deep can this transducer image structure?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Traditional CHIRP reaches 1,000 feet, while DownScan and SideScan handle 300 feet at 455 kHz (150 feet at 800 kHz), covering most freshwater and inshore needs effectively.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What's the best boat speed for SideScan and DownScan?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Optimal under 10 mph for crisp imaging; traditional CHIRP works up to 55 mph, making it great for high-speed searches then slowing for detailed scans.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I mount this on a jackplate or step hull?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, versatile options include transom, jackplate, or flush-step mounting to suit outboards, I\/O, or pad hulls for bubble-free performance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does FishReveal work with all sonar views?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"FishReveal overlays fish targets on high-detail DownScan images, blending CHIRP sensitivity with structure clarity for instant species ID from afar.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long is the cable, and what's the connector type?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"25 feet of cable with a 9-pin connector provides ample length for routing to helm-mounted units without extensions.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this suitable for saltwater fishing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely—its durable build and wide temp range handle brackish bays or coastal wrecks, spotting reefs and snook hides with ease.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cp\u003eSee structure and cover with a new level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging ™ 3-in-1 sonar featuring CHIRP, SideScan and DownScan with FishReveal ™. The high-level clarity, target separation and detail of Active Imaging will help you find more fish by making it easier to quickly identify fish-holding structure like rockpiles, standing timber, weedbeds, ditches and drop-offs – all at a greater distance from your boat. Get the best of CHIRP sonar and DownScan on one screen with the exclusive FishReveal ™ Smart Target view that helps you easily recognize fish from structure and cover on high-detailed DownScan images.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eSimrad 0014489001 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Pins: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Pin\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1000 Feet Traditional\/ 300 Feet DownScan\/ 300 Feet SideScan\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e83\/200 kHz Medium\/ High CHIRP And 455\/800 kHz CHIRP Sidescan\/ Down Scan Imaging 3-In-1 Sonar\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e25 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eSimrad 0014489001 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eMore Refined Detail And Better Range Than Any Other Imaging Technology\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eActive Imaging 3-In-1 Transducer With CHIRP, SideScan And DownScan\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasier Target Identification With FishReveal ™ Smart Target View\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSupports Medium And High CHIRP\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With Simrad NSS Evo3 And GO Series Displays\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eSimrad 0014489001 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/SIM\/Warranty\/Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSimrad-Professional-Global-Warranty-Policy-2016-v2.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eActive Imaging 3-in-1 Transom Mount Transducer \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSee structure and cover with a level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging™ 3-in-1 sonar featuring CHIRP, SideScan and DownScan with FishReveal™. The high-level clarity, target separation and detail of Active Imaging will help you find more fish by making it easier to quickly identify fish-holding structure like rockpiles, standing timber, weedbeds, ditches and drop-offs – all at a greater distance from your boat. Get the best of CHIRP sonar and DownScan on one screen with the exclusive FishReveal™ Smart Target view that helps you easily recognize fish from structure and cover on high-detailed DownScan images. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e•    More refined detail and better range than any other imaging technology\u003c\/p\u003e\u003cp\u003e•    Active Imaging 3-in-1 transducer with Lowrance CHIRP, SideScan and DownScan  \u003c\/p\u003e\u003cp\u003e•    Easier target identification with FishReveal™ Smart Target View\u003c\/p\u003e\u003cp\u003e•    Supports Medium and High CHIRP (83\/200kHz) + 455\/800kHz frequencies\u003c\/p\u003e\u003cp\u003e•    Compatible with Lowrance HDS LIVE, HDS Carbon, Elite Ti2 and Simrad NSS evo3 and GO series displays\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOperating temperature: -15°C to +55°C (+5°F to +131°F)\u003c\/p\u003e\u003cp\u003eStorage temperature: -30°C to +70°C (-22°F to +158°F)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCable length:   7.6 m (25 ft)\u003c\/p\u003e\u003cp\u003eMounting options: Transom, flush step, and jackplate mounting\u003c\/p\u003e\u003cp\u003eConnector: 9 pin\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOutput: Traditional, SideScan imaging, DownScan imaging and temperature\u003c\/p\u003e\u003cp\u003eFrequency: Traditional: 200 kHz\/High : Chirp 83 kHz\/Medium Chirp, SideScan: 455 kHz, 800 kHz \u003c\/p\u003e\u003cp\u003eMax depth: Traditional: 305 m (1000 ft) at 200 kHz\/High Chirp and 83 kHz\/Medium Chirp: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150 ft)\u003c\/p\u003e\u003cp\u003eOperating speed: Traditional: 48 knots (55 mph): DownScan and SideScan: 9 knots (10 mph)\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eDepth sensor, MFG#000-14489, three-in-one beam mount for active imaging. Use mid\/high CHIRP elements to comb the 800 kHz side and down scans. 25' cable for single transducer...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-73324\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14489-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024172773\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699311226973,"sku":"CWR-73324","price":343.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/84435-navico-active-imaging-3-in-1-transom-mount-transducer-0.jpg?v=1688443947"},{"product_id":"85607-navico-active-imaging-2-in-1-transducer","title":"Navico Active Imaging 2-in-1 Transducer","description":"\u003csection class=\"product-description\"\u003e\n  \u003ch2\u003eDiscover Crystal-Clear Underwater Views with Active Imaging Technology\u003c\/h2\u003e\n  \u003cp\u003eImagine gliding across the water, pinpointing fish-holding structures, submerged wrecks, and bait schools with stunning clarity—no more guessing games or blurry images. The Active Imaging 2-in-1 Transducer transforms your fishing electronics into a powerful scouting tool, blending high-resolution side scan and down scan imaging into one compact unit. Perfect for serious anglers who demand detail without distance trade-offs, this transducer delivers razor-sharp sonar returns that reveal the underwater world like never before.\u003c\/p\u003e\n  \n  \u003ch2\u003eWhy Active Imaging Stands Out in Sonar Performance\u003c\/h2\u003e\n  \u003cp\u003eTraditional side scan sonar often forces tough choices: sharp detail up close or wider coverage farther out. Not with Active Imaging. By precisely directing sonar beams and using separate transmit and receive elements, it achieves faster ping rates for smoother, more detailed images. The advanced polymer housing mimics water's acoustic properties, minimizing signal loss for reliable performance in varied conditions.\u003c\/p\u003e\n  \n  \u003cp\u003eSwitch seamlessly between 455 kHz for expansive 300-foot side range—ideal for scouting vast areas—and 800 kHz for 150-foot coverage with exceptional resolution to spot fine details like individual fish or rock piles. Whether you're targeting bass in shallow cover or walleye along drop-offs, this versatility keeps you ahead of the game.\u003c\/p\u003e\n  \n  \u003ch2\u003eReal-World Benefits for Anglers and Boaters\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnhanced Fish-Finding Precision:\u003c\/strong\u003e Spot fish suspended off structure or hugging the bottom with DownScan's photo-like imaging, complemented by SideScan's wide panoramic views.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNo Extra Gear Needed:\u003c\/strong\u003e Plug-and-play with compatible next-gen displays—no black boxes or modules required, simplifying your setup.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpeed Without Blur:\u003c\/strong\u003e Maintain crystal-clear images up to 9 knots, perfect for trolling or running contours.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature Sensing Built-In:\u003c\/strong\u003e Track water temp changes to predict fish behavior and locate thermoclines effortlessly.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged for Real Use:\u003c\/strong\u003e Handles harsh marine environments, from icy mornings to scorching afternoons.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch2\u003eEffortless Installation and Versatile Mounting\u003c\/h2\u003e\n  \u003cp\u003eWith a 25-foot cable and standard 9-pin connector, setup is straightforward for most boats. Choose transom mount for simplicity, flush-step for clean hull lines, or jackplate for offshore rigs. Its 2-in-1 design means fewer holes to drill and cleaner wiring compared to separate transducers, saving time and reducing drag.\u003c\/p\u003e\n  \n  \u003ch3\u003eQuick Installation Tips\u003c\/h3\u003e\n  \u003col\u003e\n    \u003cli\u003ePosition the transducer parallel to the waterline at rest for optimal beam spread.\u003c\/li\u003e\n    \u003cli\u003eSecure with stainless hardware to withstand vibration and waves.\u003c\/li\u003e\n    \u003cli\u003eTest at various speeds to fine-tune deadrise angle for distortion-free imaging.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \n  \u003ch2\u003eTechnical Specs at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; margin: 1em 0;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequency\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e455 kHz (300 ft side range) \/ 800 kHz (150 ft side range)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eMax DownScan Depth\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e300 ft (91 m)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eOperating Speed\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eUp to 9 knots (10 mph)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e25 ft (7.6 m)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eConnector\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e9-pin\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eOperating Temperature\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e-15°C to +55°C (+5°F to +131°F)\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n  \n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes Active Imaging better than standard side scan transducers?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eActive Imaging uses separate transmit\/receive elements and advanced beam steering for faster refreshes and sharper details at longer ranges, eliminating the usual detail-vs-distance compromise.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this transducer for both shallow and deep water fishing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—800 kHz excels in shallows for high-res detail, while 455 kHz covers deeper water up to 300 feet, making it versatile for lakes, rivers, or offshore.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with traditional CHIRP sonar setups?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThis standalone 2-in-1 unit focuses on imaging; pair it with a separate CHIRP transducer for full-spectrum sonar without interference.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow fast can my boat go while using Active Imaging?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt performs reliably up to 9 knots (about 10 mph), delivering stable images even when covering ground quickly.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for most boats?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, with transom, flush-step, or jackplate options and a long cable, most users can install it themselves using basic tools— just ensure proper alignment for best results.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat kind of displays pair best with this transducer?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt shines on high-res IPS screens from next-gen fishfinders, showing full panoramic views without cropping for maximum situational awareness.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it include water temperature sensing?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, built-in temp sensor provides real-time data to help track fish movements tied to thermal layers.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cp\u003eEquip your boat with the edge that turns good days into epic ones. This transducer isn't just sonar—it's your underwater eyes, revealing secrets others miss.\u003c\/p\u003e\n\u003c\/section\u003e\u003cp\u003e\u003cstrong\u003eActive Imaging 2-in-1 Transducer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eActive Imaging Transducers\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eActive Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range\u003c\/li\u003e\n\u003cli\u003eActive Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eActive Imaging is available in two models\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Active Imaging stand alone transducer lets the user combine the new Active Imaging transducer with a separate CHIRP transducer for dual transducer installs.\u003c\/li\u003e\n\u003cli\u003eActive Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eActive imaging Technology\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eActive Imaging utilizes the latest techniques in sonar signal generation\u003c\/li\u003e\n\u003cli\u003eActive Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive\u003c\/li\u003e\n\u003cli\u003eActive Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eActive Imaging sonar offers no compromise high resolution detail to users\u003c\/li\u003e\n\u003cli\u003e800kHz operation covers many use cases and ranges.\u003c\/li\u003e\n\u003cli\u003eWith 800kHz range and resolution capabilities users do not need to choose between seeing in High detail or seeing far\u003c\/li\u003e\n\u003cli\u003eHigh resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment\u003c\/li\u003e\n\u003cli\u003eActive Imaging transducers do not require any modules or extra hardware for use with next-generation displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating temperature: -15°C to +55°C (+5°F to +131°F)\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -30°C to +70°C (-22°F to +158°F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCable length:   7.6 m (25 ft)\u003c\/li\u003e\n\u003cli\u003eMounting options: Transom, flush step, and jackplate mounting\u003c\/li\u003e\n\u003cli\u003eConnector: 9 pin\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput: SideScan imaging, DownScan imaging and temperature\u003c\/li\u003e\n\u003cli\u003eFrequency: 455 kHz and 800 kHz\u003c\/li\u003e\n\u003cli\u003eMax depth: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150ft) side range at 800 kHz\u003c\/li\u003e\n\u003cli\u003eOperating speed: DownScan and SideScan: 9 knots (10 mph)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eWith the help of a higher level of detail and active imaging with any other structural imaging technology, 2 in 1 sonar, SideScan and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-74496\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-14490-001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9420024172780\u003cbr\u003e\n            ","brand":"Navico","offers":[{"title":"Default Title","offer_id":32699311816797,"sku":"CWR-74496","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/navico-active-imaging-2-1.jpg?v=1673152024"}],"url":"https:\/\/nvnmarine.com\/collections\/navico-products-transducers.oembed?page=3","provider":"NVN Marine","version":"1.0","type":"link"}