Minn Kota Riptide SE 70 - Latch & Door - Hand Control - 24V-70lb-52"
Minn Kota Riptide SE 70 - Latch & Door - Hand Control - 24V-70lb-52" — Product description
Imagine gliding silently across choppy saltwater bays, your boat positioned perfectly over structure without spooking fish. The Minn Kota Riptide SE 70 delivers that edge for dedicated inshore anglers chasing redfish, trout, or flounder. Built from the ground up for brutal marine conditions, this hand-control trolling motor combines raw power with smart efficiency, letting you fish longer and harder without constant battery worries.
What sets it apart? A rock-solid mount that shrugs off waves, a versatile tiller that adapts to your stance, and corrosion-proofing that laughs at salt spray. Anglers swear by its whisper-quiet operation—fish never know you're there until it's too late.
Engineered for Saltwater Dominance
Battle-Tested Latch & Door Mount
The heart of this motor is its extruded aluminum upper arm and Latch & Door system. Stow it securely in rough seas with a positive rear latch, then pop it off in seconds for trailering or storage. No wrestling with pins or bolts—just click, lift, and go. This design shrinks the footprint on your boat deck while maximizing strength, perfect for skiffs, bay boats, or kayaks punching through wakes.
Tilt and Extend Tiller for All-Day Comfort
Fatigued arms kill focus. The innovative Tilt/Extend tiller tilts up to 45 degrees and stretches 6 inches, customizing to your height and fishing position. Steer precisely from standing, sitting, or leaning—without cramps or awkward reaches. Variable speed control keeps you nimble in tight spots like mangroves or oyster bars.
Digital Maximizer: Power That Lasts
Why burn through batteries like cheap fuses? Digital Maximizer intelligently pulses power, squeezing up to 5x more runtime from the same charge. Pair it with your 24V setup, and you're spot-on drifts turn into full-day marathons. Less heat means cooler runs and longer motor life, even on scorching summer flats.
Weedless Wedge 2 Propeller
Grass flats and hydrilla don't stand a chance. Swept-back blades push debris aside instead of shredding it, saving juice and keeping you moving. The MKP-32 prop grabs water efficiently, delivering 70 pounds of thrust without bogging down—ideal for pushing through current or wind.
Unmatched Protection Against the Elements
Saltwater eats gear alive, but not this Riptide. Premium marine alloys, multi-stage anodizing, and zinc dichromate plating form an ironclad shield. Fully encapsulated electronics in marine-grade urethane seal out moisture, while heat-shrink tubing on connections blocks corrosion at the source. A patented sacrificial zinc anode takes the hit for your motor, preventing galvanic damage.
Then there's the indestructible composite shaft—stronger than steel, flexes on stumps or rocks, and backed by a lifetime guarantee. No kinks, no rust, just relentless performance season after season.
Push-to-Test Battery Gauge
One glance tells you everything. Press for an instant charge readout—no guessing when to recharge mid-trip.
Cool, Quiet, and Deadly Effective
Large windings and a friction-cutting bearing system keep things cool under load and silent as a whisper. Oversized commutators shed heat fast, extending runtime and lifespan. Quick-Lock cam depth adjuster lets you dial in prop position effortlessly, locking tight against vibration.
Real-world anglers report all-day trolling at half-speed on a single set of batteries, precise spot-locking in 2-foot seas, and zero downtime from failures. It's not just a motor; it's your unfair advantage on the water.
Key Specifications at a Glance
| Feature | Details |
|---|---|
| Control Style | Tilt/Extend Tiller (Hand Control) |
| Voltage | 24V |
| Max Thrust | 70 lbs. |
| Shaft Length | 52" |
| Speed Control | Variable |
| Max Amp Draw | 42A |
| Propeller | Weedless Wedge 2 (MKP-32) |
Pro Tips for Peak Performance
- Rinse with fresh water after every saltwater trip to extend component life, even with top-tier protection.
- Match batteries to 24V setup—deep-cycle AGM or lithium for best results with Digital Maximizer.
- Use the Quick-Lock cam to set shaft depth 12-18 inches below hull for optimal bite in varying conditions.
- Stow in the extended position for transport to protect the lower unit.
California Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Frequently Asked Questions
Is the Minn Kota Riptide SE 70 suitable for saltwater fishing?
Absolutely. It's designed specifically for harsh saltwater environments with advanced corrosion protection, including a sacrificial zinc anode, fully encapsulated electronics, and anodized aluminum components.
What makes the Latch & Door mount special?
The Latch & Door system allows quick, tool-free removal for storage or security, while providing a secure stow in rough water. Its compact design saves deck space.
How does Digital Maximizer improve battery life?
It optimizes power delivery by pulsing electricity only as needed, reducing waste heat and extending runtime up to five times on the same charge compared to traditional motors.
Can the tiller adjust for different user heights?
Yes, the Tilt/Extend tiller tilts up to 45 degrees and extends 6 inches, accommodating standing, sitting, or varied boat configurations comfortably.
Is the composite shaft really lifetime warranted?
Yes, Minn Kota guarantees the composite shaft for life against breakage, kinking, or corrosion—stronger than steel and built to flex on impacts.
What's the best prop for weedy areas?
The included Weedless Wedge 2 prop excels in thick vegetation, with swept-back blades that shed weeds without losing thrust or draining batteries.
How quiet is this trolling motor?
Extremely quiet, thanks to advanced bearings and windings that minimize friction and noise—perfect for stealthy approaches in shallow waters.
Riptide SE 70 - Latch & Door - Hand Control - 24V-70lb-52"
The updated motor mounts on the Riptide SE motors feature an extruded upper arm made from marine-grade anodized aluminum that is built for years of trouble-free use.
All Riptide SE motors are constructed to withstand the harsh environment of saltwater and the anodized aluminum upper arm is no exception. The motors also feature fully encapsulated electronics and a patented sacrificial zinc anode for added corrosion protection. Riptide SE motors also include Digital Maximizer technology that provides up to five times longer run time on a single charge.
Riptide SE motors also utilize a Latch & Door mounting system for easy removal of the motor for security and storage. Adding to its ruggedness, The =Riptide SE has a composite shaft that is guaranteed for life
Rock-Solid Riptide SE Mount
Riptide SE's ultra-strong, lightweight mount features a smaller footprint and tempered, marine-grade extruded aluminum construction. It stows securely in rough water with its positive rear stow latch; while a Latch & Door Design makes removing your motor easy.
Quick-Lock Cam Depth Adjuster
Change depths simply and securely with the Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.
Tilt/Extend Tiller
Get the best of both worlds on your hand control motor with the new Tilt/Extend Tiller. It can both tilt (up to 45°) and extend (6") to fit the way you fish.
Push-to-Test Battery Gauge - Riptide SE
Get an instant "state of charge" with this easy-to-read gauge.
Digital Maximizer
Digital Maximizer™ controls and optimizes power to extend battery life and reduce damaging heat. You'll stay on the water up to five times longer on a single charge.
Weedless Wedge 2 Prop
Push weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless Wedge™ 2 features swept-back, flared blades for unrelenting, reliable prop performance.
Advanced Corrosion Protection
Riptide motors are impervious to saltwater's corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil TGIC polyester, powder coat paint. When it's all done, you're left with unequaled corrosion protection.
Full Encapsulated Electronics
Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater.
Sacrificial Anode
Galvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a patented sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that's completely protected from saltwater's destructive forces.
Indestructible Composite Shaft - Guaranteed For Life!
Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won't break, kink or corrode. That's why we're confident enough to make it the only trolling motor shaft that's guaranteed for life.
Cool, Quiet Power
Nothing runs cooler or more quietly than a Minn Kota®. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise. So quiet, they'll never hear you coming
Specifications:
- Control: Tilt/Extend Tiller
- Volts: 24
- Max Thrust: 70 lbs.
- Shaft Length: 52"
- Speed Control: Variable
- Max. Amp Draw: 42
- Prop: Weedless Wedge 2 (MKP-32)
!["Warning"]("https://productimageserver.com/prop65/6pt.png")
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
SKU: NVN-42448
MPN: 1355920
UPC: 029402036462
Technical specifications
| Brand | Minn Kota |
| Model | Minn Kota Riptide SE 70 - Latch & Door - Hand Control - 24V-70lb-52" |
| SKU / MFR# | 42448 |
Set product metafields under specs.* to populate this table.
Frequently asked questions
No questions yet. Got one? Drop us a line.
