Humminbird XNT-14-20-T TM f/ION & ONIX 200/83kHz
Humminbird XNT-14-20-T TM f/ION & ONIX 200/83kHz — Product description
Upgrade your Humminbird ION or ONIX fishfinder with the reliable XNT 14 20 T transom mount transducer, designed for serious anglers chasing clarity on the water. This dual-beam powerhouse delivers sharp images at 83 kHz and 200 kHz, helping you spot fish, structure, and bottom contours with ease whether you're trolling deep lakes or skimming shallow bays.
Key Features That Set It Apart
- Dual-Beam Coverage: Switch between a wide 60-degree beam at 83 kHz for broad-area scanning and a precise 20-degree beam at 200 kHz for detailed targeting—perfect for adapting to changing depths and conditions.
- Built-In Temperature Sensor: Track water temp changes in real-time, essential for locating thermoclines where baitfish and predators congregate.
- Impact-Release Mounting Bracket: Engineered to pivot away if it hits logs, rocks, or debris, saving you from costly repairs and keeping your setup running strong season after season.
- Transom Mount Design: Easy to install on the boat's stern for optimal sonar performance, minimizing air bubbles and maximizing signal strength.
Why Anglers Trust This Transducer for ION and ONIX Systems
Picture this: You're out on a crisp morning, lines in the water, and your Humminbird screen lights up with crisp arches marking suspended walleye over a drop-off. The XNT 14 20 T makes that happen consistently. Its rugged construction handles rough waters, while the dual frequencies give you versatility no other single-beam setup can match. From bass boats to multi-species rigs, this transducer pairs seamlessly with ION and ONIX units, unlocking their full sonar potential without the guesswork.
Unlike basic transducers that struggle in varied environments, this model's balanced cone angles provide reliable coverage down to hundreds of feet. Anglers report cleaner separations between fish and bait schools, leading to more hookups during prime feeding windows. Plus, the temp sensor feeds data straight to your display, helping you dial in lure choices based on real conditions.
Installation Insights for Peak Performance
Mounting is straightforward but rewards attention to detail. Position it just below the waterline, slightly off-center from the propeller to avoid turbulence. Deadrise angle adjustment ensures the beam shoots straight down, preventing skewed readings. Once secured, test at idle and planing speeds—fine-tune as needed for bubble-free operation. Pro tip: Pair with anti-fouling paint on the face to keep it gunk-free in algae-heavy waters.
Care and Maintenance Tips
Extend its lifespan with simple habits: Rinse with fresh water after saltwater trips, inspect the cable for nicks, and store dry during off-seasons. Avoid high-pressure washes directly on the ceramic element to preserve sensitivity. With proper care, it'll deliver years of dependable service.
California Proposition 65 Warning: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm.
Frequently Asked Questions
What frequencies does the Humminbird XNT 14 20 T transducer support?
It operates on dual frequencies: 83 kHz with a 60-degree beam for wide coverage and 200 kHz with a 20-degree beam for high-detail resolution, ideal for Humminbird ION and ONIX series.
Is this transducer compatible with all Humminbird models?
Specifically optimized for ION and ONIX units, ensuring plug-and-play integration and peak performance with their advanced sonar processing.
Does it include a temperature sensor?
Yes, it features a built-in temperature probe that provides accurate surface water readings directly on your display.
How does the impact-release feature work?
The mounting bracket springs the transducer upward if it strikes an underwater obstacle, then resets automatically, protecting both the unit and your boat.
Can I use this on a boat with a high deadrise hull?
Absolutely—the adjustable transom mount compensates for deadrise angles up to 20 degrees, maintaining perpendicular beam projection for accurate sonar data.
What's the best way to clean the transducer face?
Gently wipe with a soft cloth and mild soap after use; avoid abrasives or pressure washers to prevent damage to the sensitive piezoelectric elements.
for/ONIX - 200/83 kHz
Mount on the transom (back of the boat).
Available on many models, the impact release feature pivots transducer out of the way if struck by an object
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Beam type sensor for ONIX unit. The sensor can be easily installed on the back of the ship and has an anti-collision release device. It will make the sensor bypass the pivot if the following conditions occur:
SKU: NVN-49929
MPN: 710247-1
UPC: 082324038778
Technical specifications
| Brand | Humminbird |
| Model | Humminbird XNT-14-20-T TM f/ION & ONIX 200/83kHz |
| SKU / MFR# | 49929 |
Set product metafields under specs.* to populate this table.
Frequently asked questions
No questions yet. Got one? Drop us a line.
