Victron BlueSolar MPPT Charge Controller - 100V - 15AMP

BlueSolar MPPT Charge Controller - 100V - 15AMP

Features:

• Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. 
• Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. 
• Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. 
• Programmable battery charge algorithm See the software section on our website for details 
• Day/night timing and light dimming option See the software section on our website for details 
• Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed

Warranty Info

Please contact your dealer for any returns, repairs or support issues related to this product.

"Maximum Power Point Tracking (MPPT) is a technique used to get the maximum possible power from a solar panel. It is achieved by putting a variable load on the panel so that it achieves its optimum output voltage, and then converting that voltage to the optimum required by the battery. The effect of this can be to produce output up to 30% higher than a similar panel without this technology. This solar charge controller automatically adjusts for 12 or 24 volt systems. Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Ultra fast Maximum Power Point Tracking (MPPT) Intelligent battery life program Auto Detect 12 or 24 Volts Can be used with any panel output voltage up to 100 Volts Maximum 15 Amp load, 12 or 24 Volt Built in over temperature protection Reverse polarity protection Output shore circuit protection Internal circuits IP protected Click for datasheet Read the Blog Post Programming requires the use of a VE-USB controller or a Bluetooth Dongle NEW UL 1741 and CSA C22.2 Certification Read what the load output is used for in this blog post Tech TipConnecting solar panels in series makes for a higher input voltage to the MPPT controller which gives it more to work with and greater efficiency. It also makes for less voltage drop in the wires. The first number of the model number is the maximum input voltage, the second number is the maximum amperage on the output side."
SKU: NVN-82971
MPN: SCC010015200R
UPC: 8719076025337